Hi, Ian Shepherd suggested this small app that read out several values for the file you load into it, I’ve tested it and if you know the label of the values in the table, the values are accessible with VO. However, it will still not tell you the position in the file for the values obtained.
Download here: https://www.dropbox.com/s/rjdqzu8mvtoquvp/r128x-gui-0-22.zip Read more here: http://themasteringshow.com/episode-44/ Best, John André On 28 Oct 2018, at 19:37, John Covici <cov...@ccs.covici.com> wrote: This is already recorded, I need to do this after the fact. On Sun, 28 Oct 2018 13:13:19 -0400, CHUCK REICHEL wrote: > > Hi John, > > What about putting a limiter on the master buss and setting the output > ceiling to what ever you want? > Waves l1 or l2 or l3 is accessible to do this. :) > Would that work for your need? > > Thanks > Chuck > "God does not play dice with the universe" > "Albert Einstein’ > > On Oct 28, 2018, at 12:27 PM, John Covici wrote: > >> I am very surprised there is not a plug in which will do this. By the >> way, I did look aat the gain plugin and pushed the analyze button, but >> nothing happened -- am I doing something wrong? >> >> On Sun, 28 Oct 2018 10:59:42 -0400, >> Steve Sparrow wrote: >>> >>> Hi John. If you want to find the highest peak in a file without having to >>> play through the file I don’t believe it’s doable easily in Protools. As >>> Slau said there are work arounds that will assist you to do it. But what >>> you need is a find largest peak option. This actual feature is available in >>> programs like sound forge, But i’ve only found it in the windows version. >>> Although i’ve not updated to the latest version of sound forge on the mac >>> side, so it might be there now.I use this feature quite a bit especially in >>> radio production. How it works is you go to the find largest peak from the >>> menu, hit enter and it takes you to the largest peak in the file, and you >>> can edit it from that point. Very useful. how ever i’ve not been able to >>> achieve this in protools without playing the track, and looking at the >>> highest peak on the metre read out. >>> A sighted person could probably achieve this easily in Protools, i’d >>> imagine, as they could see exactly where the highest peaks are in the time >>> line. quickly. >>> I don’t think the accessible peak metre will make it much quicker in this >>> respect, as it works off the level metres, it couldn’t give you any audible >>> indication what the highest peak was unless you are playing the track. How >>> ever i’m happy to be corrected here if there are other ways to achieve this. >>> >>> Steve >>> >>>> On 27 Oct 2018, at 12:13 am, John Covici <cov...@ccs.covici.com> wrote: >>>> >>>> Now if only there were a way to find the maximum volume in a file, >>>> maybe n hour or two, that would be very nice. And I don't want to >>>> play the whole thing to find out! >>>> >>>> >>>> On Fri, 26 Oct 2018 10:06:39 -0400, >>>> John André Lium-Netland wrote: >>>>> >>>>> Hi, >>>>> >>>>> I’ve got a couple of questions related to the use of the accessible peak >>>>> meter and spectrum analyser, and in case this is useful to someone else, >>>>> I’ll paste inn my answers below. I should also add that the manuals for >>>>> these plugins are found in the users/shared/documentation folder on your >>>>> startup drive. >>>>> >>>>> Hi, >>>>> >>>>> Yes, all the meters will alert you when the threshold you set are >>>>> touched. So that’s also the case when the meter is set to show peak >>>>> values. So, if you aim to have the meters at a maximum level of -14 dB >>>>> LUFS or -16 dB RMS, or -0,5 dB peak level, you simply set the threshold >>>>> to the value you aim for and raise the volume until you hear the >>>>> threshold is touched by the music. For some music genres, it might also >>>>> be a good idea to make sure the dynamic range of your song, that is the >>>>> difference between the loudest and the most silent parts of your song, is >>>>> not more than for example 8 dB. You can check this by setting the >>>>> threshold to a value 8 dB lower than what you aim for as the highest >>>>> loudness, and then play the most silent parts of your song. If the >>>>> threshold is not touched here, you might consider fixing that issue by >>>>> using automation or compression to even out the dynamics in the song. >>>>> >>>>> I’m working on a set of presets for the plugins in Pro Tools, to simplify >>>>> this, since you then can have separate presets for different meter types >>>>> and different situations. but you might of course create such presets >>>>> yourself in Logic Pro or Pro Tools. >>>>> >>>>> If you would like to know the specific value of the meter at different >>>>> parts in a song, you should adjust the threshold up and down until you >>>>> hear the threshold value is touched by the music. >>>>> >>>>> If you would like to work with the K system (K14,K20 etc.), you set the >>>>> threshold to the K value, but use the RMS+3dB mode. >>>>> >>>>> The spectrum analyser works the same way, but here you should first set a >>>>> freq value and a range, and then set the threshold until you hear the >>>>> music is touching the threshold for that frequency range. So, if you set >>>>> the freq to 1k (1000Hz), the range to 500Hz, and the threshold is touched >>>>> at a certain value, you know that this is the volume between 1000 and >>>>> 1500 Hz. By moving the freq value up and down, and change the threshold >>>>> until it is touched by the music, you’ll get a picture of how loud the >>>>> music is in different freq ranges for this song. >>>>> >>>>> Does this make sense? ;) >>>>> >>>>> Best, >>>>> John André >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> On 24 Oct 2018, at 14:37, John André Lium-Netland >>>>> <eml...@a-pro-studio.no> wrote: >>>>> >>>>> Hi, >>>>> >>>>> Some great news today: >>>>> Based on a previous external project and their own plugin framework, >>>>> TBProAudio this month upgraded/developed AccesiblePeakMeter2, an >>>>> accessible meter that will work for RMS/LUFS, VU, peak level and even for >>>>> K12/K14/K20 if you set up some presets. It’s compatible with both Pro >>>>> Tools/VoiceOver/Mac and other DAWs and platforms. >>>>> >>>>> Using the same method, they have also upgraded/developed >>>>> AccessibleSpectrumAnalyser 1.01, an accessible spectrum analyser that >>>>> will work with Pro Tools/VoiceOver/Mac as well as other DAWs and >>>>> platforms. >>>>> >>>>> They are also working on a possible idea for an accessible phase meter. >>>>> >>>>> I really appreciate the efforts they have put into this, only based on my >>>>> request for some accessible meters. There are currently no other >>>>> accessible meters that does all this. The products can be downloaded free >>>>> of charge from TBProAudio here: >>>>> >>>>> https://www.tb-software.com/TBProAudio/download.html >>>>> >>>>> Look for the AccessiblePeakMeter2, and the accessible spectrum analyser. >>>>> The products are calibrated for 0 dB FS, so no further calibration is >>>>> needed. I’m working on a set of presets that will speed up the setup of >>>>> different meters for different situations. I’ll share them when I have >>>>> done some testing. >>>>> >>>>> Hope this will help others as well! >>>>> >>>>> Best, >>>>> John André >>>>> >>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>>> Your life is like a penny. You're going to lose it. The question is: >>>> How do >>>> you spend it? >>>> >>>> John Covici wb2una >>>> cov...@ccs.covici.com >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to ptaccess+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> Your life is like a penny. You're going to lose it. The question is: >> How do >> you spend it? >> >> John Covici wb2una >> cov...@ccs.covici.com >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una cov...@ccs.covici.com -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
