Tom, also regarding your pedal issue, I found the following article that is supposed to correct the issue on the MKII devices. Perhaps it will work for you as well. I have not had a chance to try it out for my self yet, but am just passing it along for your reference. See following link:
https://support.native-instruments.com/hc/en-us/articles/115005166305-How-to-Configure-Sustain-Expression-Pedals-on-a-KOMPLETE-KONTROL-MK2-Keyboard?_ga=2.74440599.423050809.1574102050-346329362.1571253812 I haven't had a chance to try this for myself on my S61 MKII yet, On 11/18/19, Slau Halatyn <slauhala...@gmail.com> wrote: > Hi Tom, > I don't know what's going on with your instrument tracks not playing. > Depending on what type of instruments they are, it sometimes can take a > minute to load the instruments themselves. There are also tons of variables > of which I'm not aware. Are these older sessions? Were the instrument tracks > created within the session itself and the tracks played back correctly the > last time? Further, there could be any number of issues with the session > file itself. Of course, nobody here is in a position to offer technical > support to troubleshoot such issues. Can you create a new session, create an > instrument track, record something and hear it back with your pedal working > properly? Eliminating variables is, of course, the key to figuring out what > the root of the problem might be. Did you remove your FB 360 plug-ins? > slau > > >> On Nov 18, 2019, at 2:45 AM, Tom Hessels <tomhessel...@gmail.com> wrote: >> >> Hi Slau, >> I posted this message in the KK list but because of the fact that it >> perhaps has something to do with a pt problem I weill also post it here: >> Hi Slau, >> >> The pedals are always connected. >> So that’s not the problem. >> There is also another strange problem that might be connected with my midi >> problem. >> How can i explain it (I read a lot of english but i write it not very >> often) >> And perhaps is what i write now is more in place in the ptaccess list. >> Ok, when i start pro tools and choose a project from the recent table the >> project loads innediate and the faders of the fadeport 8 reacts. >> But when i start to play the project I only hear ;my audio tracks. No >> instruments tracks are playing and also no effects are heard: no reverbs >> on audio tracks etc. >> What i do then is loading the project using the .ptx file. >> Often then I have that pedal issue. >> I’Ll post this message also in ptaccess. >> >> Tom. >> Tom Herssels (the Netherlands.) >> >> >> Van: komplete-kontrol-acc...@googlegroups.com >> <mailto:komplete-kontrol-acc...@googlegroups.com> >> <komplete-kontrol-acc...@googlegroups.com >> <mailto:komplete-kontrol-acc...@googlegroups.com>> Namens Slau Halatyn >> Verzonden: maandag 18 november 2019 00:00 >> Aan: komplete-kontrol-acc...@googlegroups.com >> <mailto:komplete-kontrol-acc...@googlegroups.com> >> Onderwerp: Re: [komplete-kontrol-access] Midi problem >> >> The first thing that occurs to me is that you need to make sure that your >> pedal is connected before powering up the NI keyboard. Once that is the >> case, only then you should boot-up your system. At least as a starting >> point, I'd make sure to follow those steps to eliminate variables. >> slau >> >> >> >> On Nov 17, 2019, at 1:28 PM, Tom Hessels <tomhessel...@gmail.com >> <mailto:tomhessel...@gmail.com>> wrote: >> >> Hi, >> >> I have to midi devices connected to my mac: >> Native instruments s61 keyboard; >> Faderport 8. >> The last time (I think since I’m using teh Faderport) I have problems with >> the pedals connected to the s61. >> Suddenly the sustain does’nt work annymore or the expression pedal acts >> strange. >> I have to reset things or even restore a time machine backup. >> I had alook at audio midie setup app and saw that both devices use port >> 1. >> Could that be the problem or is is it possible to use mor devices on the >> same port? >> I tried to change ports but the app seems not very accessible or am i >> doing things wrong? >> >> Tom. >> Tom Hessels (the Netherlands) >> >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Komplete Kontrol Access" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to komplete-kontrol-access+unsubscr...@googlegroups.com >> <mailto:komplete-kontrol-access+unsubscr...@googlegroups.com>. >> To view this discussion on the web, visit >> https://groups.google.com/d/msgid/komplete-kontrol-access/001a01d59d74%24d1375810%2473a60830%24%40gmail.com >> <https://groups.google.com/d/msgid/komplete-kontrol-access/001a01d59d74%24d1375810%2473a60830%24%40gmail.com?utm_medium=email&utm_source=footer>. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Komplete Kontrol Access" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to komplete-kontrol-access+unsubscr...@googlegroups.com >> <mailto:komplete-kontrol-access+unsubscr...@googlegroups.com>. >> To view this discussion on the web, visit >> https://groups.google.com/d/msgid/komplete-kontrol-access/CF8D1570-5B7C-4639-B1E4-54B303B37B63%40gmail.com >> <https://groups.google.com/d/msgid/komplete-kontrol-access/CF8D1570-5B7C-4639-B1E4-54B303B37B63%40gmail.com?utm_medium=email&utm_source=footer>. >> >> >> Van: ptaccess@googlegroups.com <ptaccess@googlegroups.com> Namens Slau >> Halatyn >> Verzonden: zondag 17 november 2019 16:08 >> Aan: PTAccess List <ptaccess@googlegroups.com> >> Onderwerp: Re: Midi problem >> >> Not sure as this is not Pro Tools specific but there is a Komplete Kontrol >> email list where somebody might have a better idea. I think you can find >> subscription info on www.kk-access.com <http://www.kk-access.com/> >> HTH, >> Slau >> >> >> >>> On Nov 17, 2019, at 9:59 AM, Tom Hessels <tomhessel...@gmail.com >>> <mailto:tomhessel...@gmail.com>> wrote: >>> >>> Hi, >>> >>> I have to midi devices connected to my mac: >>> Native instruments s61 keyboard; >>> Faderport 8. >>> The last time (I think since I’m using teh Faderport) I have problems >>> with the pedals connected to the s61. >>> Suddenly the sustain does’nt work annymore or the expression pedal acts >>> strange. >>> I have to reset things or even restore a time machine backup. >>> I had alook at audio midie srtup app and saw that both devices use port >>> 1. >>> Could that be the problem or is is it possible to use mor devices on the >>> same port? >>> I tried to change ports but the app seems not very accessible or am i >>> doing things wrong? >>> >>> Tom. >>> Tom Hessels (the Netherlands) >>> >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com >>> <mailto:ptaccess+unsubscr...@googlegroups.com>. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/000801d59d57%24942647f0%24bc72d7d0%24%40gmail.com >>> <https://groups.google.com/d/msgid/ptaccess/000801d59d57%24942647f0%24bc72d7d0%24%40gmail.com?utm_medium=email&utm_source=footer>. >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com >> <mailto:ptaccess+unsubscr...@googlegroups.com>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/2E29C104-395A-45EE-9CDF-41DFF409932B%40gmail.com >> <https://groups.google.com/d/msgid/ptaccess/2E29C104-395A-45EE-9CDF-41DFF409932B%40gmail.com?utm_medium=email&utm_source=footer>. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com >> <mailto:ptaccess+unsubscr...@googlegroups.com>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/004601d59de4%242c211e90%2484635bb0%24%40gmail.com >> <https://groups.google.com/d/msgid/ptaccess/004601d59de4%242c211e90%2484635bb0%24%40gmail.com?utm_medium=email&utm_source=footer>. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/F73832A4-5B5F-4411-9B1C-A6FCC2E1A216%40gmail.com. > -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/CAKVN6vM-ngpX4RobCVUVjR%3DM3cbK1Ow_s9u-0ExF%3DfaPaR2n8g%40mail.gmail.com.
