Yes, SPOT ON! That solved the problem. I didn't get how I have activated it. May be just hit an unwanted shortcut.
Thank you very much Luca Il giorno venerdì 6 marzo 2020 00:30:19 UTC+1, Luca Cascino ha scritto: > > Hi all, > > I have a problem with Routng > > If I use a cascade of 3 sends bus it's not repricing sound > > This is an example in my drums tracks > > the two overheads are assigned to overhead bus in I/O > Overhead bus is assigned to DRUMS BUS > DRUMS BUS is assigned to a DRUMS GROUP BUS > DRUMS GROUP BUS IS ASSIGNE TO OUTPUT 1-2 > > The result of this routing is silence > > If I rout the drums bus straight into output 1-2 it words but when if > assign to the DRUMS GROUP Bus is not working > > This is also for other instruments > > So basically when I rout 3 track in cascade no sound comes out form my > master track > So an AUX track can't be Routed on an other AUX track and the to the > master. > > > An other example is for the reverb sends > The rever AUX track does not reproduce sound in its output is routed to an > AUX BUS. > > I have this problem only on this session since in the others session works > just fine. > > I hope I have explained my problem and someone can help me > > Thanks > Luca > -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/e204b854-a61a-443e-b05a-df104903f3f4%40googlegroups.com.
