Following up on Russell's excellent presentation on OpenWRT last week, I've developed a set of scripts to automatically provision an OpenWRT ap or router for your network including firmware flashing, setting the system clock (via NTP), package setup and configuration uploading. While I realize this doesn't hold much utility for the average user, anyone that provisions multiple OpenWRT devices with similar configurations on a regular basis may find this useful.
Basically once you've set your configuration environment once, you plug in the device you want to configure press a button and 3-4 minutes later you have a fully operational AP containing your stock configuration without any required user intervention. http://www.stephouse.net/files/openwrtprovisioner/openwrtprovisioner.v0.1.tgz DISCLAIMER: don't run it if you don't understand what it's doing. DISCLAIMER2: This has only been tested with Kamikaze v8.09 RC1 with a Ubiquiti Nanostation Tyler Booth // President ph. 503.548.2000 | fx. 503.548.2002 921 SW Washington St, Suite 224 Portland OR 97205 --~--~---------~--~----~------------~-------~--~----~ The Personal Telco Project - http://www.personaltelco.net/ Donate to PTP: http://www.personaltelco.net/donate Archives: http://news.gmane.org/gmane.network.wireless.portland.general/ Etiquette: http://www.personaltelco.net/index.cgi/MailingListEtiquette List information: http://lists.personaltelco.net To post to this group, send email to ptp-general@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] -~----------~----~----~----~------~----~------~--~---
