Bob, Since you are patching in to the high level input on the recorder the PTR1 does not really know the difference between a tape player and a record player so just use the same settings. Beware of one common pit fall. Just because you can buy an adapter to connect a component turntable directly into the input on a recorder never try it. You must plug your turntable into a preamplifier with the input specific to the type of cartridge in your arm and then patch out of the preamp output and into the recorder. Its not a matter of levels, records have a special RIAA equalization applied that has to be compensated for during playback.
Frank -----Original Message----- From: Robert Acosta [mailto:[EMAIL PROTECTED] Sent: Monday, April 25, 2005 8:27 AM To: [email protected] Subject: Re: creating playable music cd's Thanks Frank for the good advice here. At present i am recording my cassette collection to disks using cdr audio. Then i will tackle my record collection with music disks. Could you give me some thoughts on the settings for recording records to the music disks which i can then play on all cd players? i think I should use 256 megabytes for example. ----- Original Message ----- From: "frank cuta" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Sunday, April 24, 2005 10:18 PM Subject: RE: creating playable music cd's > My experience has been > 1. use CDR blanks for Daisy/MP3 > 2. use the special audio/music formatted blanks for music that you want > to play on standard music CD players > 3. avoid using CDRW blanks. Sure you can edit and delete more on them > but if you want to edit and delete use your flash card. All reviews I > have read and my personal experience at work confirms that CDRW disks > exhibit less compatibility from player to player. They also supposedly > deteriorate faster than CDR disks. > > Frank > > -----Original Message----- > From: Robert Acosta [mailto:[EMAIL PROTECTED] > Sent: Saturday, April 23, 2005 11:01 PM > To: [email protected] > Subject: Re: creating playable music cd's > > > Hello Scott, i can help with your last question. i would definitely use > > music disks. As you no doubt know, cdr's allow just one recording. > cdrw's > allow you to erase your recordings many times. > ----- Original Message ----- > From: "Scott Blanks" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Saturday, April 23, 2005 4:51 PM > Subject: creating playable music cd's > > > Hi folks, > > First, thanks to everyone who gave input about recording from tape. > > Here's my next confusion. When I record onto a cd using the pcm 44.1 > recording setting, am I creating a cd which can be played on most cd > players? I thought I was recording in a cd format, but when I put the > finalized disc into a cd player, it didn't play. Looking at the disc on > a > computer, I discovered that the disc had .wav files. > > So, how can I use the Plextalk to create "music" cd's, like the ones you > buy > in a record shop, and that will play on any cd player? One last thing, > must > I use "music" cdr's or cdrw's? > > Thanks, > Scott Blanks > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: > [EMAIL PROTECTED] > For additional commands, e-mail: > [EMAIL PROTECTED] > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: > [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
