Nagaraj, On Mittwoch, 24. September 2008, nagaraj wrote: > Now I did not find any configure error, and installed the ptxdist package. > Then I followed the build chain application note. > > on executing > > ptxdist projects > ---------------------- Available PTXdist Projects: ------------------------ > ---------------------------------------------------------------------------
What ptxdist version did you installed? For the ptxdist-1.0.x stable release there are example projects you can clone. For the ptxdist-1.99.x currently there are no example projects. You must start from scratch. BTW: Please subscribe to the "PTXdist: PTXdist Developer Mailinglist" for this kind of questions. Refer http://www.pengutronix.de/mailinglists/index_en.html > This shows no projects like OSELAS.BSP..... packages in the list , what may > be the reason? I guess: There are no projects? ;-) > Can you provide me a procedure to build the OSELAS BSP that steps I should > follow after building cross toolcahin. You need a ptxdist project. For example this one: http://www.pengutronix.de/oselas/bsp/phytec/download/phyCORE-i.MX27/OSELAS.BSP-Phytec-phyCORE-i.MX27-6.3.tar.gz (BTW: It needs ptxdist-1.0.x). Extract it, change into the new directory, and you can start to use the BSP and/or ptxdist. To learn how it works you can follow http://www.pengutronix.de/oselas/bsp/phytec/OSELAS.BSP-Phytec-phyCORE-i.MX27-Quickstart.pdf Did you read the app notes at http://www.pengutronix.de/software/ptxdist/appnotes_en.html? Regards, Juergen -- Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry Handelsregister: Amtsgericht Hildesheim, HRA 2686 Vertretung Sued/Muenchen, Germany Phone: +49-8766-939 228 | Fax: +49-5121-206917-9 -- ptxdist mailing list ptxdist@pengutronix.de