Mainz/Hildesheim, Germany - PHYTEC Messtechnik and Pengutronix have released a 
board support package for Phytec's

 - phyCORE-i.MX27 ARM v5
   http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-ARM9-i.MX27.html

 - phyCORE-i.MX31 ARM v65
   http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-ARM11-i.MX31.html

based CPU modules.

Its to be used in conjunction with Pengutronix's PTXdist userland build system
version 1.99.10 and OSELAS.Toolchain-1.99.2. PTXdist is one of the major 
technology components of Pengutronix's professional Open Source Embedded 
Linux Automation Services (OSELAS - http://www.oselas.com).

The OSELAS.BSP-Phytec-phyCORE-8 introduces the main support for the
phyCORE-i.MX31 CPU module and continues to support the phyCORE-i.MX27 module 
in the same way than the previous release.

Supported phyCORE-i.MX31 major features:

        * Automated boardsetup
        * U-Boot-v2 (2.0.0-rc7)
        * Kernel 2.6.28
        * supports the PCM-970 evaluation base board
        * NOR/NAND flash
        * Ethernet
        * UART
        * USB 1.x/2.x Host Controller
        * One Wire Controller
        * MMC/SD Card support
        * Framebuffer
        * CAN Bus
        * Quickstart how to deal with all components

Supported phyCORE-i.MX27 major features:

        * Automated boardsetup
        * U-Boot-v2 (2.0.0-rc7)
        * Linux-2.6.27
        * supports the PCM-970 evaluation base board
        * NOR/NAND flash
          * Booting from NAND memory only
        * SRAM for filesystem use
        * Fast ethernet (FEC)
        * UART
        * SPI master
        * I2C master
          * onboard I2C EEPROM support
          * onboard I2C RTC support
        * Framebuffer support
        * Touch support (preliminary)
        * supports the PCM-970 evaluation base board
        * CPU frequency scaler
        * Video camara support through Video for Linux (v4l) and gstreamer
        * Audio support for playback and capturing (ALSA)
        * One Wire Controller
        * MMC/SD Card Support
        * USB host (1.1 and 2.0)
        * Quickstart how to deal with all components

This BSP release can be found at our download site:

        http://www.pengutronix.de/oselas/bsp/phytec/download/phyCORE/

The PTXdist 1.99.10 release can be found at the download site:

        http://www.pengutronix.de/software/ptxdist/download/v1.99/

The OSELAS.Toolchain-1.99.2 release can be found at the download site:

        http://www.pengutronix.de/oselas/toolchain/download/

-- 
Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry
    Handelsregister: Amtsgericht Hildesheim, HRA 2686
         Vertretung Sued/Muenchen, Germany
   Phone: +49-8766-939 228 |  Fax: +49-5121-206917-9

--
ptxdist mailing list
ptxdist@pengutronix.de

Reply via email to