Hi, On Fri, Jun 29, 2012 at 10:30:35AM +0100, Xizhou Wang wrote: > Plan to transfer a project from i.MX53-QSB kit and LTIB build system to TQma53 > module using the PTXdist tool. I managed to create the image for the SD card > based on the BSP supplied with the board (the BSP is not officially released > yet). The original hd.image work fine can boot the TQ kit. But the image I > created directly boot from Linux kernel and stop on the USB device. The > Barebox is not show up on the console log. > > I did not change the kernel and barebox setting and simple select the platform > and ptx config from the exist one and build. The toolchain is precompiled. The > attached is the log output. Any help please. > > I just start to use PTXdist. Try to transfer the LTIB based project to the new > TQma53 module. There could be two ways: porting the customer device support > (LVDS touch panel, GUI, I2C communication protocol) and apps to PTXdist again > or patch the already working LTIB build with the TQma53 board level code > (u-boot, kernel 2.6.35) and build the project for the TQ board in LTIB. Which > one is more logical and easier to achieve? Any suggestions?
Porting to ptxdist is usually pretty easy, and much more powerful than working with LTIB. This list will help with community questions; if you need commercial help, please drop me a note off-list. rsc -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- ptxdist mailing list ptxdist@pengutronix.de
