Hi, i tried DistroKit.
ptxdist go; ptxdist images went through. But when i try to boot, i get this: barebox 2016.05.0-20160610-1 #1 Sat Jun 24 14:46:36 CEST 2017 Board: Raspberry Pi 2 Model B bcm2835-cs 3f003000.timer: probe failed: Device or resource busy bcm2835-gpio 3f200000.gpio: probed gpiochip-1 with base 0 bcm2835-gpio bcm2835-gpio0: probe failed: Device or resource busy malloc space: 0x07be4000 -> 0x07fe3fff (size 4 MiB) bcm2835_mci bcm2835_mci0: registered as bcm2835_mci0 mci0: detected SD card version 2.0 mci0: registered disk0 environment load /boot/barebox.env: No such file or directory Maybe you have to create the partition. running /env/bin/init... Hit m for menu or any other key to stop autoboot: 1 ext4 ext40: EXT2 rev 1, inode_size 128 blspec: blspec_scan_directory: /mnt/disk0.1 loader/entries blspec: ignoring entry with incompatible devicetree "ti,am335x-bone" blspec: ignoring entry with incompatible devicetree "ti,am335x-bone-black" blspec: blspec_scan_directory: disk0.1 loader/entries blspec: booting Raspberry Pi 2 - Pengutronix-DistroKit from mci0 Loading ARM Linux zImage '/mnt/disk0.1//boot/zImage' Loading devicetree from '/mnt/disk0.1//boot/bcm2836-rpi-2-b.dtb' commandline: console=ttyAMA0,115200 loglevel=5 systemd.log_level=warning systemd.show_status=auto loglevel=5 systemd.log_level=warning systemd.show_status=auto root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rw [ 0.000836] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low [ 0.000856] arm_arch_timer: WARNING: Please fix your firmware [ 0.000875] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low [ 0.000886] arm_arch_timer: WARNING: Please fix your firmware [ 0.067195] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low [ 0.067199] arm_arch_timer: WARNING: Please fix your firmware [ 0.067211] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low [ 0.067214] arm_arch_timer: WARNING: Please fix your firmware [ 0.068191] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low [ 0.068195] arm_arch_timer: WARNING: Please fix your firmware [ 0.068202] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low [ 0.068205] arm_arch_timer: WARNING: Please fix your firmware [ 0.069086] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low [ 0.069090] arm_arch_timer: WARNING: Please fix your firmware [ 0.069097] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low [ 0.069100] arm_arch_timer: WARNING: Please fix your firmware [ 1.170790] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property [ 1.325575] dwc2 3f980000.usb: 3f980000.usb supply vusb_d not found, using dummy regulator [ 1.334002] dwc2 3f980000.usb: 3f980000.usb supply vusb_a not found, using dummy regulator Then the green LED just double flashes. Any idea how i could proceed? Thanks Fritz
_______________________________________________ ptxdist mailing list ptxdist@pengutronix.de
