Hello,
PHP 7.3.2 seems to work well with sqlite, since it uses its own bundeled
sqlite3.
I use with --with-sqlite3, so not specifing any special src.
I have attached my modified php make file.
I kept the naming php5.make due limited time, but the target file is now
named php instead of php5.
Hope this helps to getting this working again with ptxdist builded
sqlite3.so
Regards
Am 2019-02-22 09:28, schrieb Michael Olbrich:
Hi,
On Mon, Feb 11, 2019 at 03:31:38PM +0100, Simon Agostini wrote:
is PHP 7.3 suppot planned?
I'd be happy to accept patches for this, but I currently don't have
plans
to do this myself.
I tried to adapt the PHP5 make file but I get:
/build-target/php-7.3.2/ext/pdo_sqlite/libsqlite/sqlite3.c',
needed by
'ext/pdo_sqlite/libsqlite/sqlite3.lo'. Stop.
with --with-sqlite3=$(PTXDIST_SYSROOT_TARGET)/usr
if I remove the dir path it works, but I think this shall not be
the
optimal build!?
The php5 package is not maintained very well. It has no priority for me
and
other than the occasional minor version bump, nobody else seems to care
either.
I'm guessing, that the php build system is broken and there is some
mixup
about internal vs. system sqlite. Do you get sqlite support at all if
you
remove --with-sqlite3=...?
Michael
# -*-makefile-*-
#
# Copyright (C) 2006-2008 by Robert Schwebel
# 2009, 2012 by Marc Kleine-Budde <m...@pengutronix.de>
#
# See CREDITS for details about who has contributed to this project.
#
# For further information about the PTXdist project and license conditions
# see the README file.
#
#
# We provide this package
#
PACKAGES-$(PTXCONF_PHP5) += php5
#
# Paths and names
#
PHP5_VERSION := 7.3.2
PHP5_MD5 := 92a237d2f4075eb00dd2b1f36e71ae4c
PHP5 := php-$(PHP5_VERSION)
PHP5_SUFFIX := tar.xz
PHP5_SOURCE := $(SRCDIR)/$(PHP5).$(PHP5_SUFFIX)
PHP5_DIR := $(BUILDDIR)/$(PHP5)
PHP5_LICENSE := PHP
#
# Note: older releases are moved to the 'museum', but the 'de.php.net'
# response with a HTML file instead of the archive. So, try the 'museum'
# URL first
#
PHP5_URL := \
http://museum.php.net/php7/$(PHP5).$(PHP5_SUFFIX) \
http://php.net/distributions/$(PHP5).$(PHP5_SUFFIX)
# ----------------------------------------------------------------------------
# Prepare
# ----------------------------------------------------------------------------
PHP5_CONF_ENV := \
$(CROSS_ENV) \
ac_cv_prog_cc_cross=yes \
ac_cv_c_bigendian_php=$(call ptx/ifdef, PTXCONF_ENDIAN_BIG, yes, no)
# autoconf
#
PHP5_AUTOCONF := \
$(CROSS_AUTOCONF_USR) \
--disable-phar \
--with-config-file-path=/etc/php \
--enable-opcache=no \
--without-iconv
# FIXME: php5 doesn't interprete "with_foo=no" correctly, so we cannot
# give --without-foo options. Should be fixed in php5's configure.in.
# ------------
# SAPI Modules
# ------------
ifdef PTXCONF_PHP5_SAPI_AOLSERVER
PHP5_AUTOCONF += --with-aolserver=FIXME
else
#PHP5_AUTOCONF += --without-aolserver
endif
ifdef PTXCONF_PHP5_SAPI_APXS2FILTER
PHP5_AUTOCONF += --with-apxs2filter=$(PTXDIST_SYSROOT_TARGET)/usr/bin/apxs
else
#PHP5_AUTOCONF += --without-apxs2filter
endif
ifdef PTXCONF_PHP5_SAPI_APXS2
PHP5_AUTOCONF += --with-apxs2=$(PTXDIST_SYSROOT_TARGET)/usr/bin/apxs
else
# PHP5_AUTOCONF += --without-apxs2
endif
ifdef PTXCONF_PHP5_SAPI_CAUDIUM
PHP5_AUTOCONF += --with-caudium
else
# PHP5_AUTOCONF += --without-caudium
endif
ifdef PTXCONF_PHP5_SAPI_CLI
PHP5_AUTOCONF += --enable-cli
else
PHP5_AUTOCONF += --disable-cli
endif
ifdef PTXCONF_PHP5_SAPI_CONTINUITY
PHP5_AUTOCONF += --with-continuity
else
#PHP5_AUTOCONF += --without-continuity
endif
ifdef PTXCONF_PHP5_SAPI_EMBEDDED
PHP5_AUTOCONF += --enable-embed
else
#PHP5_AUTOCONF += --disable-embed
endif
ifdef PTXCONF_PHP5_SAPI_ISAPI
PHP5_AUTOCONF += --with-isapi
else
#PHP5_AUTOCONF += --without-isapi
endif
ifdef PTXCONF_PHP5_SAPI_MILTER
PHP5_AUTOCONF += --with-milter
else
#PHP5_AUTOCONF += --without-milter
endif
ifdef PTXCONF_PHP5_SAPI_NSAPI
PHP5_AUTOCONF += --with-nsapi
else
#PHP5_AUTOCONF += --without-nsapi
endif
ifdef PTXCONF_PHP5_SAPI_PHTTPD
PHP5_AUTOCONF += --with-phttpd
else
#PHP5_AUTOCONF += --without-phttpd
endif
ifdef PTXCONF_PHP5_SAPI_PI3WEB
PHP5_AUTOCONF += --with-pi3web
else
#PHP5_AUTOCONF += --without-pi3web
endif
ifdef PTXCONF_PHP5_SAPI_ROXEN
PHP5_AUTOCONF += --with-roxen
else
#PHP5_AUTOCONF += --without-roxen
endif
ifdef PTXCONF_PHP5_SAPI_ROXEN_ZTS
PHP5_AUTOCONF += --with-roxen-zts
else
#PHP5_AUTOCONF += --without-roxen-zts
endif
ifdef PTXCONF_PHP5_SAPI_THTTPD
PHP5_AUTOCONF += --with-thttpd
else
#PHP5_AUTOCONF += --without-thttpd
endif
ifdef PTXCONF_PHP5_SAPI_TUX
PHP5_AUTOCONF += --with-tux
else
#PHP5_AUTOCONF += --without-tux
endif
ifdef PTXCONF_PHP5_SAPI_CGI
PHP5_AUTOCONF += --enable-cgi
else
PHP5_AUTOCONF += --disable-cgi
endif
# ---------------
# General Options
# ---------------
ifdef PTXCONF_PHP5_XML
PHP5_AUTOCONF += --enable-xml
else
PHP5_AUTOCONF += --disable-xml
endif
ifdef PTXCONF_PHP5_XML_LIBXML2
PHP5_AUTOCONF += \
--enable-libxml \
--with-libxml-dir=$(SYSROOT)/usr
else
PHP5_AUTOCONF += --disable-libxml
endif
ifdef PTXCONF_PHP5_XML_LIBXML2_READER
PHP5_AUTOCONF += --enable-xmlreader
else
PHP5_AUTOCONF += --disable-xmlreader
endif
ifdef PTXCONF_PHP5_XML_LIBXML2_WRITER
PHP5_AUTOCONF += --enable-xmlwriter
else
PHP5_AUTOCONF += --disable-xmlwriter
endif
ifdef PTXCONF_PHP5_XML_LIBXML2_DOM
PHP5_AUTOCONF += --enable-dom
else
PHP5_AUTOCONF += --disable-dom
endif
ifdef PTXCONF_PHP5_XML_LIBXML2_XSLT
PHP5_AUTOCONF += --with-xsl=$(SYSROOT)/usr
else
PHP5_AUTOCONF += --without-xsl
endif
ifdef PTXCONF_PHP5_XML_LIBXML2_SIMPLEXML
PHP5_AUTOCONF += --enable-simplexml
else
PHP5_AUTOCONF += --disable-simplexml
endif
ifdef PTXCONF_PHP5_XML_LIBXML2_XMLRPC
PHP5_AUTOCONF += --with-xmlrpc
else
PHP5_AUTOCONF += --without-xmlrpc
endif
ifdef PTXCONF_PHP5_EXT_ZLIB
PHP5_AUTOCONF += --with-zlib=$(SYSROOT)/usr
else
PHP5_AUTOCONF += --without-zlib
endif
ifdef PTXCONF_PHP5_EXT_OPENSSL
PHP5_AUTOCONF += --with-openssl=$(SYSROOT)/usr
else
PHP5_AUTOCONF += --without-openssl
endif
ifdef PTXCONF_PHP5_EXT_CURL
PHP5_AUTOCONF += \
--with-curl=$(SYSROOT)/usr
else
PHP5_AUTOCONF += --without-curl
endif
ifdef PTXCONF_PHP5_EXT_MYSQL
PHP5_AUTOCONF += \
--with-mysql=$(SYSROOT)/usr \
--with-pdo-mysql=$(SYSROOT)/usr
else
#PHP5_AUTOCONF += --without-mysql
endif
ifdef PTXCONF_PHP5_EXT_SOAP
PHP5_AUTOCONF += --enable-soap
else
PHP5_AUTOCONF += --disable-soap
endif
ifdef PTXCONF_PHP5_EXT_SOCKETS
PHP5_AUTOCONF += --enable-sockets
else
PHP5_AUTOCONF += --disable-sockets
endif
ifdef PTXCONF_PHP5_EXT_SQLITE3
PHP5_AUTOCONF += --with-sqlite3 --with-pdo-sqlite
# PATH removed for PHP7 since it breaks the build PHP5_AUTOCONF +=
--with-sqlite3=$(PTXDIST_SYSROOT_TARGET)/usr --with-pdo-sqlite
# broken config system: sqlite3 (local copy) uses it
# but it is only linked to if used by external dependencies
PHP5_CONF_ENV += PHP_LDFLAGS=-ldl
else
PHP5_AUTOCONF += --without-sqlite3 --without-pdo-sqlite
endif
ifdef PTXCONF_PHP5_EXT_PEAR
PHP5_AUTOCONF += --with-pear=FIXME
else
PHP5_AUTOCONF += --without-pear
endif
# ----------------------------------------------------------------------------
# Target-Install
# ----------------------------------------------------------------------------
$(STATEDIR)/php5.targetinstall:
@$(call targetinfo)
@$(call install_init, php5)
@$(call install_fixup, php5,PRIORITY,optional)
@$(call install_fixup, php5,SECTION,base)
@$(call install_fixup, php5,AUTHOR,"Robert Schwebel
<r.schwe...@pengutronix.de>")
@$(call install_fixup, php5,DESCRIPTION,missing)
ifdef PTXCONF_PHP5_SAPI_APXS2
@$(call install_copy, php5, 0, 0, 0644, -, \
/usr/modules/libphp7.so)
endif
ifdef PTXCONF_PHP5_SAPI_CLI
@$(call install_copy, php5, 0, 0, 0755, $(PHP5_PKGDIR)/usr/bin/php, \
/usr/bin/php)
endif
ifdef PTXCONF_PHP5_SAPI_CGI
@$(call install_copy, php5, 0, 0, 0755, -, /usr/bin/php-cgi)
endif
ifdef PTXCONF_PHP5_INI
@$(call install_alternative, php5, 0, 0, 0644, /etc/php/php.ini)
endif
@$(call install_finish, php5)
@$(call touch)
# vim: syntax=make
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
