On Tue, Oct 01, 2019 at 06:12:37PM +0200, Alexander Dahl wrote: > Hello Roland, > > Am Dienstag, 1. Oktober 2019, 13:15:19 CEST schrieb Roland Hieber: > > The usb.ids file is no longer installed by usbutils since v008, create a > > new package to fetch it. Since the file is not a tarball, we cannot use > > $(call extract) and need to extract it ourselves. > > > > Signed-off-by: Roland Hieber <r...@pengutronix.de> > > --- > > rules/usb-ids.in | 4 ++ > > rules/usb-ids.make | 92 ++++++++++++++++++++++++++++++++++++++++++++++ > > 2 files changed, 96 insertions(+) > > create mode 100644 rules/usb-ids.in > > create mode 100644 rules/usb-ids.make > > > > diff --git a/rules/usb-ids.in b/rules/usb-ids.in > > new file mode 100644 > > index 000000000000..8c447c5c2c47 > > --- /dev/null > > +++ b/rules/usb-ids.in > > @@ -0,0 +1,4 @@ > > +## SECTION=shell_and_console > > + > > +config USB_IDS > > + tristate > > diff --git a/rules/usb-ids.make b/rules/usb-ids.make > > new file mode 100644 > > index 000000000000..904cec9537d6 > > --- /dev/null > > +++ b/rules/usb-ids.make > > @@ -0,0 +1,92 @@ > > +# -*-makefile-*- > > +# > > +# Copyright (C) 2019 by Roland Hieber <r...@pengutronix.de> > > +# > > +# For further information about the PTXdist project and license conditions > > +# see the README file. > > +# > > + > > +# > > +# We provide this package > > +# > > +PACKAGES-$(PTXCONF_USB_IDS) += usb-ids > > + > > +# > > +# Paths and names > > +# > > +USB_IDS_VERSION := 0 > > +USB_IDS_MD5 := 47a791eab0bf9aa41a33a82bbccaedb3 > > +USB_IDS := usb-ids > > +USB_IDS_SUFFIX := bz2 > > +USB_IDS_URL := http://www.linux-usb.org/usb.ids.$(USB_IDS_SUFFIX) > > +USB_IDS_SOURCE := $(SRCDIR)/$(USB_IDS).$(USB_IDS_SUFFIX) > > +USB_IDS_DIR := $(BUILDDIR)/$(USB_IDS) > > +USB_IDS_LICENSE := GPL-2.0-or-later OR BSD-3-Clause > > + > > +# > > --------------------------------------------------------------------------- > > - +# Extract > > +# > > --------------------------------------------------------------------------- > > - + > > +$(STATEDIR)/usb-ids.extract: > > + @$(call targetinfo) > > + @$(call clean, $(USB_IDS_DIR)) > > + @mkdir -p $(USB_IDS_DIR) && \ > > + cd $(USB_IDS_DIR) && \ > > + bzcat $(USB_IDS_SOURCE) > usb.ids > > + @$(call touch) > > Is there a benefit of calling bzcat and redirecting the output, instead of > just calling bunzip2?
Yes. bunzip2 deletes the source file and saves the extracted file to the same folder, but here we want a different output. - Roland > > > + > > +# > > --------------------------------------------------------------------------- > > - +# Prepare > > +# > > --------------------------------------------------------------------------- > > - + > > +$(STATEDIR)/usb-ids.prepare: > > + @$(call targetinfo) > > + @$(call touch) > > + > > +# > > --------------------------------------------------------------------------- > > - +# Compile > > +# > > --------------------------------------------------------------------------- > > - + > > +$(STATEDIR)/usb-ids.compile: > > + @$(call targetinfo) > > + @$(call touch) > > + > > +# > > --------------------------------------------------------------------------- > > - +# Install > > +# > > --------------------------------------------------------------------------- > > - + > > +$(STATEDIR)/usb-ids.install: > > + @$(call targetinfo) > > + @mkdir -p $(USB_IDS_PKGDIR)/usr/share/ > > + @cd $(USB_IDS_DIR) && \ > > + install -m0644 usb.ids $(USB_IDS_PKGDIR)/usr/share/ > > + @$(call touch) > > + > > +# > > --------------------------------------------------------------------------- > > - +# Target-Install > > +# > > --------------------------------------------------------------------------- > > - + > > +$(STATEDIR)/usb-ids.targetinstall: > > + @$(call targetinfo) > > + > > + @$(call install_init, usb-ids) > > + @$(call install_fixup, usb-ids,PRIORITY,optional) > > + @$(call install_fixup, usb-ids,SECTION,base) > > + @$(call install_fixup, usb-ids,AUTHOR,"Roland Hieber > > <r...@pengutronix.de>") + @$(call install_fixup, > > usb-ids,DESCRIPTION,missing) > > + > > + @$(call install_copy, usb-ids, 0, 0, 0644, -, /usr/share/usb.ids) > > + > > + @$(call install_finish, usb-ids) > > + > > + @$(call touch) > > + > > +# > > --------------------------------------------------------------------------- > > - +# Clean > > +# > > --------------------------------------------------------------------------- > > - + > > +#$(STATEDIR)/usb-ids.clean: > > +# @$(call targetinfo) > > +# @$(call clean_pkg, USB_IDS) > > + > > +# vim: syntax=make > > Alex > > > _______________________________________________ > ptxdist mailing list > ptxdist@pengutronix.de > -- Roland Hieber | r.hie...@pengutronix.de | Pengutronix e.K. | https://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de
