Dear Andreas,
Am Freitag, den 07.10.2011, 17:03 +0200 schrieb Andreas Bauer: > First a big thank you for a quality piece of software. I am a first > time user and am amazed at the flexiblity that PA provides. I > installed PA because I wanted to have better integration of my > Bluetooth headset and works perfectly. thank you for such positive feed back. I guess developers (not me) should get that more often. > Running Debian Squeeze (stable) with Kernel 3.0.1 Is the PA version 0.9.21-3+squeeze1 [1]? I guess the ALSA version is quite old then too. PA 1.0 was released recently. Could you somehow test a more recent version. I am not sure if there is a live CD for that purpose or if you have a spare storage medium where you can try Debian Sid/unstable. > Now I have three issues which I hope someone can point me to a > possible solution. > > On my Lenovo X201 laptop with Intel HDA I do see a heavy increase in > power consumption when I activate pulseaudio. The system is already > optimised so without pulseaudio it will idle at 6-9W with wifi on, > with pulseaudio started it will jump to 13W. No pulseaudio client > connected (no sound played) > > Averaged battery reading every 5s > > 1267000 > 1311000 > 1330000 > 1347000 <- here pa-suspender is started > 1192000 > 1091000 > 986000 > 952000 > 943000 > 988000 > 970000 > 943000 > > I have already optimised the PA setup for my needs (e.g. low quality > resampling-method), so I investigated further: > > From top: > > 8816 ab 9 -11 211m 3832 2832 S 0 0.1 0:00.06 pulseaudio > > From powertop: > > 695,7 µs/s 13,6 > Process /usr/bin/pulseaudio --start --log-target=syslog > > So it is not about CPU consumption, pulseaudio is economical with CPU > as is. > > The same thing (also drawing about the same amount of extra juice) > happens with this: > > root@charly:~# mv /etc/asound.conf /etc/asound.pulse > root@charly:~# aplay -d front /boot/vmlinuz-* > Wiedergabe: Rohdaten '/boot/vmlinuz-3.0.1' : Unsigned 8 bit, Rate: > 8000 Hz, mono > > So clearly, it is the power consumption of the sound chip. I suspect > that pulseaudio activates the sound chip even when no sound is being > played. Is there any way to have it only access the hardware when at > minimum one client is connected (e.g. audio playing)? I am not sure. 4 W power consumption of a sound chip sounds quite a lot to me. Additionally as written above please try a newer version. > I was not successful with this shot (old syntax?): > > add-autoload-sink alsa_sink module-alsa-sink device="hw:0" > add-autoload-source alsa_source module-alsa-source device="hw:0" You can also take a look at the ALSA Wiki [2] and provide the output of `alsa-info.sh` which should give a lot of useful information to the developers. > Second issue: I have one application (Zoiper) which can only access > ALSA at the moment (because it will not allow me to input non-hardware > ALSA device names like pcm.pulse). Is there some hack/workaround to > get such applications to talk to pulseaudio? Please open a new thread by sending a new message with an appropriate subject line for this topic. Thanks, Paul [1] http://packages.debian.org/squeeze/pulseaudio [2] http://alsa-project.org/main/index.php/Help_To_Debug
signature.asc
Description: This is a digitally signed message part
_______________________________________________ pulseaudio-discuss mailing list pulseaudio-discuss@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss