On Tue, 2017-05-16 at 16:29 +0800, Hui Wang wrote: > On 05/03/2017 06:51 PM, Tanu Kaskinen wrote: > > On Wed, 2017-05-03 at 11:23 +0800, Hui Wang wrote: > > > Today I tested the latest master branch (already including your two > > > patches), seems it did not fix the problem. Below is my testing detail: > > > > > > Install ubuntu 16.04 on my laptop. > > > clone the latest pulseaudio source code, checkout master branch > > > build the source code: ./autogen.sh;make > > > kill the existing pulseaudio and run the latest pulseaudio: pulseaudio > > > --kill && ./src/pulseaudio -vvvnF ./src/default.pa -p $(pwd)/src > > > > > > On this machine, we have sound cards, sinks and ports like below: > > > > > > Card#0(HDA INTEL HDMI)-> Sink#0(hdmi-stereo)->hdmi-output(priority: 5900) > > > Card#1(HDA INTEL PCH)->Sink#1(analog-stereo)->headphones(priority: 9000) > > > > No speaker port at all on the PCH card? > > Sorry for late response, just came back from a vacation. > > I removed the speaker from the kernel driver intentionally for debugging > another audio bug. > > But it does not matter, if I don't remove the speaker, the Sink#1 has > the speaker on it, and the default sink is Sink#1, after plugging the > HDMI cable, the default sink is still Sink#1, it is expected since > Sink#1 has an available port which has higher priority than HDMI port, > then I select the HDMI to be the default sink manually, now the default > sink is Sink#0. After that I unplug the HDMI cable, the Sink#1 is > expected to be the default sink since the Sink#0 has no available ports > on it, but the default sink doesn't switch back to Sink#1. > > > > > with the new pulseaudio, I can only see one sink (analog-stereo) > > > through pactl list sinks at the beginning. > > > > > > After I plug the HDMI cable (headphone is not plugged), I can see two > > > sinks via pactl list sinks, but the default sink is still the analog- > > > stereo, here I expect the default sink is hdmi-stereo since the > > > headphone is not plugged yet. > > > > That's what I'd expect too. Is the headphone port marked as unavailable > > as it should? > > Yes, it is marked "not available". > > > Then I plug the headphone, and I select the hdmi (hdmi is also > > > plugged in) as the default sink, after a while I unplug the hdmi > > > cable, here I expect the default sink is back to analog-stereo since > > > headphone is still plugged, but the default sink did not switch to > > > analog-stereo. BTW after I unplug the hdmi cable, I can still see two > > > sinks. > > > > The default sink is set in pa_core_update_default_sink() in > > src/pulsecore/core.c. That function uses the compare_sinks() function, > > and the first thing compare_sinks() does is to check if one of the > > compared sinks has an unavailable port active. Can you figure out what > > goes wrong? Is pa_core_update_default_sink() not called when you plug > > in or unplug things, or does pa_core_update_default_sink() really > > choose a sink whose active port is unavailable? > > Through debugging, I found the function pa_core_update_default_sink() is > not called when unplug the HDMI cable in the situation above. > > > The good news is after applying your new patch "[PATCH] sink, source: > update the default sink/source on port switches", the issue is fixed. > The function pa_core_update_default_sink() is called when > plugging/unplugging some audio output devices, and the default_sink is > changed as expected.
Good to know. I expected that my patch wouldn't fix your problem, but I guess I didn't think through the case properly. I pushed the patch to master, so the fix will be in the upcoming release. -- Tanu https://www.patreon.com/tanuk _______________________________________________ pulseaudio-discuss mailing list pulseaudio-discuss@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss