On Thu, 2018-11-15 at 23:50 +0500, Alexander E. Patrakov wrote: > Alexander E. Patrakov <patra...@gmail.com>: > > Tanu Kaskinen <ta...@iki.fi>: > > > On Sat, 2018-10-13 at 22:29 +0500, Alexander E. Patrakov wrote: > > > > Note that I am unhappy with it, because it fixes only a particular > > > > common problem case, while other related issues stay unfixed. E.g. if > > > > one tries to play 5.1 audio on 7.1 system, with or without this patch: > > > > > > > > - Front, Center and LFE channels are mapped 1:1, which is correct > > > > - Rear (or what mpv calls "Side") source channels are mapped to Side, > > > > which is also correct, because it's the Side speakers in the ITU-T 7.1 > > > > layout, not Rear, which have the nearest position to what Dolby > > > > specifies for Surround AC3 speakers. > > > > - The true rear channels get a mix between Front and Side, which is > > > > clearly incorrect. ITU R-REC-BS.775-3-201208 says that both sets of > > > > surround channels should be fed the same signal. > > > > > > Regarding that last point, do I understand correctly that the > > > recommendation is to duplicate the 5.1 rear(/side) channels to both the > > > side and rear channels in 7.1? Doesn't that cause imbalance by > > > amplifying the rear channels? Or is it compensated by attenuating the > > > signal? > > > > You understood correctly. In my big patch, it is compensated by > > attenuating the signal. Anyway, I am going to resubmit it later today > > without the half-baked change about the LFE volume. > > Sorry, I have to do it later. I have too much non-PulseAudio work to do :(
No problem, I'll postpone reviewing the patch until you've submitted the new version. From what I already saw, the general idea behind the patch seems good. -- Tanu https://www.patreon.com/tanuk https://liberapay.com/tanuk _______________________________________________ pulseaudio-discuss mailing list pulseaudio-discuss@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss