Hi Pali, On Tue, Apr 30, 2019 at 12:42 PM Luiz Augusto von Dentz <luiz.de...@gmail.com> wrote: > > Hi Pali, > > On Fri, Apr 26, 2019 at 6:47 PM Pali Rohár <pali.ro...@gmail.com> wrote: > > > > On Friday 26 April 2019 16:44:03 Luiz Augusto von Dentz wrote: > > > Hi Pali, > > > > > > On Fri, Apr 26, 2019 at 1:55 PM Pali Rohár <pali.ro...@gmail.com> wrote: > > > > > > > > On Friday 26 April 2019 13:09:00 Luiz Augusto von Dentz wrote: > > > > > Hi Pali, > > > > > > > > > > On Fri, Apr 26, 2019 at 11:34 AM Pali Rohár <pali.ro...@gmail.com> > > > > > wrote: > > > > > > > > > > > > On Friday 26 April 2019 11:20:26 Luiz Augusto von Dentz wrote: > > > > > > > I have an assert when I use a different headset which does > > > > > > > support apt-X HD: > > > > > > > > > > > > > > https://gist.github.com/Vudentz/0d6b6f2ad08524db69a3e223e26bc80d > > > > > > > > > > > > I have not tested aptX HD, nor aptX Low Latency. I tested only > > > > > > (classic) > > > > > > aptX. I looked at code and there is incorrect calculation of buffer > > > > > > block size for aptX HD. Try following: > > > > > > > > > > > > static void get_buffer_size_hd(void *codec_info, size_t link_mtu, > > > > > > size_t *decoded_buffer_size, size_t *encoded_buffer_size) { > > > > > > /* aptX HD compression ratio is 4:1 and we need to process one > > > > > > aptX HD sample (6 bytes) at once */ > > > > > > *encoded_buffer_size = (link_mtu/6) * 6; > > > > > > *decoded_buffer_size = *encoded_buffer_size * 4; > > > > > > } > > > > > > > > > > Will try, btw if I disable aptX HD it attempts to pick up UHQ2 but it > > > > > asserts as well: > > > > > > > > > > https://gist.github.com/Vudentz/0e91f3ba260211cab38822bcf04edd1f > > > > > > > > > > It seems that fill_preferred_configuration and can_accept_capabilities > > > > > are not agreeing with one another > > > > > > > > When fill_preferred_configuration or can_accept_capabilities fails it > > > > prints debug message about it. But I do not see any of them in your > > > > output. So I think problem can be somewhere else. > > > > > > > > I have not got this assert for uhq2, so this looks like some race > > > > condition. > > > > > > > > > so we got a transport but no profile. > > > > > > > > In your log is: > > > > bluez activated sbc_uhq2, then module-bluez5-device started to be > > > > loading, card.c chose a2dp_sink_aptx as initial profile and due to bug > > > > in module-bluetooth-policy.c aptx was not changed to sbc_uhq2. Next > > > > sbc_uhq2 was released and prepared for switching to initial profile > > > > aptx. And then assertion failed. > > > > > > > > My guess is: because card.c was not fully initialized yet (it called > > > > hook for choosing initial profile), which called code for switching > > > > profile, then u->card->profiles was not fully initialized and crashed. > > > > Profile switching should be probably allowed only after full card > > > > initialization to prevent such race conditions... > > > > > > Managed to find the problem, it was in choose_remote_endpoint_table: > > > > > > > > > for (i = 0; i < PA_ELEMENTSOF(freq_table); i++) { > > > if (freq_table[i].rate == default_sample_spec->rate) { > > > - frequency = freq_table[i].rate; > > > + frequency = freq_table[i].cap; > > > break; > > > } > > > > Nice catch, thank you! > > > > > I have not idea how this worked with the bose, maybe that has more > > > frequencies enabled since I end up with 0x44 which did not match any > > > frequencies supported in case of sony. > > > > It worked also for me, so seems that more enabled frequencies was the > > reason. > > Btw, if you are to send a v10 also include the following: > > @@ -1838,6 +1847,9 @@ static DBusMessage > *endpoint_set_configuration(DBusConnection *conn, DBusMessage > t->release = bluez5_transport_release_cb; > pa_bluetooth_transport_put(t); > > + if (!d->change_a2dp_profile_in_progress) > + pa_bluetooth_transport_set_state(t, > PA_BLUETOOTH_TRANSPORT_STATE_PLAYING); > + > pa_log_debug("Transport %s available for profile %s", t->path, > pa_bluetooth_profile_to_string(t->profile)); > > return NULL; > > Otherwise last used logic don't work as intended. > > Btw, have you tried these patches with a phone? It seems to work but > we got some problems: > > 1. At least Android seems to prefer aptX-HD but that doesn't seems to > produce any audio, in fact it crashed a few times so either have to > find out why aptX-HD is not working or don't include it. > 2. Codec switching with Android always seems to timeout. > 3. There seem to be some regression with loopback module, there seems > it always produces some glitch when resuming (during the playback it > seems alright): > > I: [alsa-sink-ALC293 Analog] module-loopback.c: Dropping 17414 usec of > audio from queue > I: [alsa-sink-ALC293 Analog] module-loopback.c: Dropping 20317 usec of > audio from queue > I: [alsa-sink-ALC293 Analog] module-loopback.c: Adding 30657 usec of > silence to queue > I: [alsa-sink-ALC293 Analog] module-loopback.c: Dropping 105170 usec > of audio from queue
Ive also got this crash: E: [lt-pulseaudio] core-util.c: The per-process limit on the number of open file descriptors has been reached. E: [lt-pulseaudio] module-loopback.c: pa_asyncmsgq_new() failed. I: [lt-pulseaudio] source-output.c: Freeing output 129 "(null)" I: [lt-pulseaudio] sink-input.c: Freeing input 124 "(null)" E: [lt-pulseaudio] module.c: Failed to load module "module-loopback" (argument: "source="bluez_source.B4_CD_27_F0_8D_0A.headset_audio_gateway" source_dont_move="true" sink_input_properties="media.role=phone""): initialization failed. D: [lt-pulseaudio] module-suspend-on-idle.c: Source bluez_source.B4_CD_27_F0_8D_0A.headset_audio_gateway becomes idle, timeout in 5 seconds. D: [lt-pulseaudio] backend-native.c: RFCOMM >> AT+VGS=15 D: [lt-pulseaudio] card.c: bluez_card.B4_CD_27_F0_8D_0A: active_profile: off -> headset_audio_gateway D: [lt-pulseaudio] core-subscribe.c: Dropped redundant event due to change event. Segmentation fault (core dumped) -- Luiz Augusto von Dentz _______________________________________________ pulseaudio-discuss mailing list pulseaudio-discuss@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss