Thanks for your replys, I am a begining Linux user and I don't understand very good, this is my default.pa:
###########3 $ cat /etc/pulse/default.pa #!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software Foundation, # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. # This startup script is used only if PulseAudio is started per-user # (i.e. not in system mode) .nofail ### Load something into the sample cache #load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav #load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav #load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav #load-sample-lazy pulse-access /usr/share/sounds/generic.wav load-sample-dir-lazy /usr/share/sounds/ubuntu/stereo .fail ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore load-module module-card-restore ### Automatically augment property information from .desktop files ### stored in /usr/share/application load-module module-augment-properties ### Load audio drivers statically (it's probably better to not load ### these drivers manually, but instead use module-hal-detect -- ### see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 #load-module module-oss device="/dev/dsp" sink_name=output source_name=input #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Alternatively use the static hardware detection module (for systems that ### lack udev support) load-module module-detect .endif ### Automatically load driver modules for Bluetooth hardware .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Network access (may be configured with paprefs, so leave this commented ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp #load-module module-zeroconf-publish ### Load the RTP reciever module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GConf settings. This can be configured with the paprefs tool. ### Please keep in mind that the modules configured by paprefs might conflict with manually ### loaded modules. .ifexists module-gconf.so .nofail load-module module-gconf .fail .endif ### Automatically restore the default sink/source when changed by the user during runtime load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Honour intended role device property load-module module-intended-roles ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. load-module module-console-kit ### Enable positioned event sounds load-module module-position-event-sounds ### Cork music streams when a phone stream is active #load-module module-cork-music-on-phone # X11 modules should not be started from default.pa so that one daemon # can be shared by multiple sessions. ### Load X11 bell module #load-module module-x11-bell sample=bell-windowing-system ### Register ourselves in the X11 session manager #load-module module-x11-xsmp ### Publish connection data in the X11 root window #.ifexists module-x11-publish.so #.nofail #load-module module-x11-publish #.fail #.endif ### Make some devices default #set-default-sink output #set-default-source input ################# Which line I must uncomment? And where i must config the module-combine for simultaneous output? Thanks for all and Happy Christmas!!! 2009/12/23 Colin Guthrie <gm...@colin.guthr.ie> > 'Twas brillig, and Tanu Kaskinen at 23/12/09 06:08 did gyre and gimble: > > ti, 2009-12-22 kello 20:34 +0000, Colin Guthrie kirjoitti: > >> Now as PA will not add individual sinks for both the digital and analog, > >> you'll have to load a separate module-alsa-sink for the other one you > >> want - e.g. if auto-detection will load digital, you should add a > >> separate sink for analog. > > > > Actually, there's another way. Profiles can be configured in the files > > under /usr/share/pulseaudio/alsa-mixer/profile-sets/. The easiest > > approach is to just edit default.conf in that directory. It takes some > > time to actually understand how those configuration files are used, but > > luckily for this exact case default.conf already contains a > > commented-out example, which can just be uncommented and it should work > > (if the sound card is capable of using both outputs at the same time, > > that is). > > > > You still need to use module-combine for simultaneous output. > > Awesome, thanks for correcting me... I still need to fully grok the > mixer profiles stuff as I still see it as black magic... I should have > remembered that this was a spell that was possible with this black magic > tho' :) > > /me will try and do some revamp stuff on the website over the holidays > and hopefully try and promote a better documentation process via that > medium. > > Col > > -- > > Colin Guthrie > gmane(at)colin.guthr.ie > http://colin.guthr.ie/ > > Day Job: > Tribalogic Limited [http://www.tribalogic.net/] > Open Source: > Mandriva Linux Contributor [http://www.mandriva.com/] > PulseAudio Hacker [http://www.pulseaudio.org/] > Trac Hacker [http://trac.edgewall.org/] > > _______________________________________________ > pulseaudio-discuss mailing list > pulseaudio-discuss@mail.0pointer.de > https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss > -- Josu Lazkano
_______________________________________________ pulseaudio-discuss mailing list pulseaudio-discuss@mail.0pointer.de https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
