Hello,
Consider the following interfaces and addresses:
# ip a l
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UNKNOWN qlen 1000
link/ether 00:50:56:b3:6a:5d brd ff:ff:ff:ff:ff:ff
inet 192.168.140.1/17 brd 192.168.255.255 scope global eth0
inet6 fe80::250:56ff:feb3:6a5d/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 00:50:56:b3:6a:5e brd ff:ff:ff:ff:ff:ff
inet6 fd00:1001:0:50:56:b3:6a:5e/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::250:56ff:feb3:6a5e/64 scope link
valid_lft forever preferred_lft forever
Now see what facter produces:
# facter | grep addr
ipaddress => 192.168.140.1
ipaddress6 => fd00:1001:0:50:56:b3:6a:5e
ipaddress_eth0 => 192.168.140.1
ipaddress_lo => 127.0.0.1
macaddress => 00:50:56:B3:6A:5D
macaddress_eth0 => 00:50:56:B3:6A:5D
macaddress_eth1 => 00:50:56:B3:6A:5E
I would expect to see a global ipaddress6 being specified for each v6 enabled
interface (ipaddress6_eth1 in my case), but this is not the case.
facter-1.6.4-1.el6.noarch on rhel6.
I'm only few days into ruby, but as I read the code, it should work as I expect.
Any ideas why I see what I see?
--
Jure Pečar
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.