Hi John,
Thank you for your response.
I am using the Ruby DSL, as I need to loop some exec commands for
which there will be some IP adress array that will be passed. Please
find below my actual code:
hostclass :swift::proxy-ring do
require "swift::common"
$storage_local_net_ip = ['IP1','IP2'] #this may contain n number of
IPs.
$zone = 0
$storage_local_net_ip.each do |sip|
$zone = $zone + 1
# adding entries to each ring
create_resource :exec, "ring_account_entry",
:command => "swift-ring-builder account.builder add z#{$zone}-
#{sip}:6002/sdb1 100",
:cwd => "/etc/swift",
:require => Class['swift::proxy-install'],
:returns => [0,1],
:path => ["/bin", "/sbin", "/usr/bin", "/usr/sbin"]
create_resource :exec, "ring_container_entry",
:command => "swift-ring-builder container.builder add z#{$zone}-
#{sip}:6001/sdb1 100",
:cwd => "/etc/swift",
:require => Class['swift::proxy-install'],
:returns => [0,1],
:path => ["/bin", "/sbin", "/usr/bin", "/usr/sbin"]
create_resource :exec, "ring_object_entry",
:command => "swift-ring-builder object.builder add z#{$zone}-
#{sip}:6000/sdb1 100",
:cwd => "/etc/swift",
:require => Class['swift::proxy-install'],
:returns => [0,1],
:path => ["/bin", "/sbin", "/usr/bin", "/usr/sbin"]
end
end
so, How can we write this in Puppet DSL. Please give me a sample for
this. I am newbie to Puppet. So I am unable to understand how to loop
this.
Thanks,
Sateesh B.
On Feb 8, 9:50 pm, jcbollinger <[email protected]> wrote:
> On Feb 8, 4:11 am, sateesh <[email protected]> wrote:
>
>
>
> > Hi,
>
> > I have written a sample manifest in puppet using Ruby DSL. I want to
> > build a looping functionality. But I am getting problem as shown
> > below:
>
> > root@puppet-swproxy:/tmp# cat test.rb
> > hostclass :test do
> > $abc = ["a","b"]
> > $abc.each do |sip|
> > create_resource :exec, "echoabc", :command => "echo #{sip}"
> > end
>
> > file "/tmp/testecho.txt", :content => "This is test file", :require =>
> > Exec['echoabc']
> > end
>
> > node "default" do
> > include "test"
> > end
> > root@puppet-swproxy:/tmp# puppet apply --verbose test.rb
> > Duplicate definition: Exec[echoabc] is already defined on node puppet-
> > swproxy.persistent.co.in
>
> This is not a problem with looping per se. In fact, it shows that
> your looping construct is itself working exactly the way it should.
>
> > I can make the echoabc as dynamic,
>
> And you need to do that, because every resource in the compiled
> catalog needs a distinct title.
>
> > but how can specify that in require
> > in next statement (file). I need to execute the file only after
> > executing the exec.
>
> You need to manage the file only after executing *which* Exec? You
> declare two distinct ones, even if you try to give them the same
> title.
>
> > So what I need to do. Generall the puppet will not
> > run in the synchronized way. I observed that the statements are
> > executed asynchronously.
>
> Puppet runs completely synchronously, but the order in which it
> applies resources is essentially unpredictable in the absence of
> declared resource relationships. That's very different from
> asynchronous operation, which would mean that Puppet applies multiple
> resources concurrently (i.e. via threads or multiple child processes),
> which it absolutely does not do.
>
> If you only need one Exec, then move its declaration out of the loop
> and all will be well. If you need multiple Execs, and you need them
> all to run before the file is managed, then create an array before the
> loop, in your loop add each Exec to it, and make your file require the
> whole array.
>
> > Also, I need to define the Exec path at the top as I specified in the
> > pp file.
>
> > Exec {
> > path => ["/bin", "/sbin", "/usr/bin", "/usr/sbin"],
> > }
>
> > How to write this in Ruby DSL. So that I can eliminate the path
> > attribute in all exec statements.
>
> Is there some reason why you actually need to use Ruby DSL instead of
> Puppet DSL? I don't see one in what you presented so far, and I would
> definitely stick to Puppet DSL unless you have no alternative. Here's
> one way to implement your example in Puppet DSL:
>
> modules/test/manifests/exececho.pp:
> ------
> define test::exececho() {
> exec { "echo_${name}":
> command => "echo ${name}",
> path => ['/bin', '/sbin', '/usr/bin', '/usr/sbin'],
> tag => test_tag,
> }
>
> }
>
> modules/test/manifests/init.pp:
> ------
> class test {
> test::exececho { ['a', 'b']: }
>
> file { '/tmp/testecho.txt':
> content => "This is test file"
> }
>
> Exec<| tag == 'test_tag' |> -> File['/tmp/testecho.txt']
>
> }
>
> If you needed the resource defaults for other Execs as well, then you
> you could define them at the top of class 'test' instead of in the
> test::exececho definition, and they would apply to all Exec resources
> declared within the scope of class 'test'. If you want those defaults
> to be global (defaults) for all Execs in your configuration, then just
> put the resource defaults in site.pp, outside any class.
>
> John
>
> John
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.