On 06.07.2012, at 11:09, Martinus wrote: > There is nothing to clean, as "puppet cert --list" or "puppet cert --list > --all" does not have an entry for those 3 particular servers. > > Deleting the client side ssl* makes no difference either. The client will > recreate the ssl (good) and the same error pops up, without anything showing > up on the master (puppet cert --list). > > And that is why I thought there is a communication problem. But here is the > tcpdump output to show that they are talking: > > > 09:01:57.812646 IP my_client.46516 > my_server.8140: Flags [S], seq > 1288389639, win 14600, options [mss 1460,sackOK,TS val 1052151283 ecr > 0,nop,wscale 4], length 0 > 09:01:57.812700 IP my_server.8140 > my_client.46516: Flags [S.], seq > 300735116, ack 1288389640, win 14480, options [mss 1460,sackOK,TS val > 38287565 ecr 1052151283,nop,wscale 4], length 0 > 09:01:57.814298 IP my_client.46516 > my_server.8140: Flags [.], ack 1, win > 913, options [nop,nop,TS val 1052151283 ecr 38287565], length 0 > 09:01:57.814686 IP my_client.46516 > my_server.8140: Flags [P.], seq 1:175, > ack 1, win 913, options [nop,nop,TS val 1052151283 ecr 38287565], length 174 > 09:01:57.814715 IP my_server.8140 > my_client.46516: Flags [.], ack 175, win > 972, options [nop,nop,TS val 38287566 ecr 1052151283], length 0 > 09:01:57.815226 IP my_server.8140 > my_client.46516: Flags [P.], seq 1:8, ack > 175, win 972, options [nop,nop,TS val 38287566 ecr 1052151283], length 7 > 09:01:57.815378 IP my_server.8140 > my_client.46516: Flags [F.], seq 8, ack > 175, win 972, options [nop,nop,TS val 38287566 ecr 1052151283], length 0 > 09:01:57.816686 IP my_client.46516 > my_server.8140: Flags [.], ack 8, win > 913, options [nop,nop,TS val 1052151284 ecr 38287566], length 0 > 09:01:57.816884 IP my_client.46516 > my_server.8140: Flags [F.], seq 175, ack > 9, win 913, options [nop,nop,TS val 1052151284 ecr 38287566], length 0 > 09:01:57.816894 IP my_server.8140 > my_client.46516: Flags [.], ack 176, win > 972, options [nop,nop,TS val 38287566 ecr 1052151284], length 0 > > > As an additional note, when I stop apache and start puppetmaster with its > inbuilt web server, then these 3 clients are happy.
Are the client working after you have enabled them using webrick puppetmaster? We are working with nginx and passenger and we needed the following in puppet configuration [master]: ssl_client_header = HTTP_X_CLIENT_DN ssl_client_verify_header = HTTP_X_CLIENT_VERIFY > > Martinus. > > On Friday, 6 July 2012 09:46:38 UTC+1, Martin Alfke wrote: > On puppet master: > puppet cert --clean <fqdn> > > on client: > rm -fr /var/lib/puppet/ssl/* > puppet agent --test > > check on master for signing request: > puppet cert --list > > > On 06.07.2012, at 10:25, Martinus wrote: > >> Martin, >> >> Right. >> >> Time is good (NTP) on all 3 clients and server. And I double checked just >> now with ntpq -p (largest offset was -20). There are different time zones, >> but then so has the working systems different time zones. >> Ruby version on all 3 clients and server: ruby 1.8.7 (2011-06-30 patchlevel >> 352) >> The SSLDir line looks like this: "ssldir = /var/lib/puppet/ssl" on all >> systems (config file is copied across systems). I checked, and the standard >> set of directories are there and owned by Puppet. However, crl.pem is not >> present like on the working systems. >> >> Martinus. >> >> On Friday, 6 July 2012 09:07:46 UTC+1, Martin Alfke wrote: >> Hi, >> >> - check time on client and server >> - check ruby version on the 3 server which fail >> - check SSLDir configuration in /etc/puppet/puppet.conf on the 3 systems. >> >> Martin >> >> On 06.07.2012, at 09:57, Martinus wrote: >> >>> I have a problem on 3 out of ~40 servers that gives the following error: >>> >>> err: Could not request certificate: SSL_connect returned=1 errno=0 >>> state=unknown state: sslv3 alert handshake failure >>> >>> From previous posts, I made sure that SSLVerifyClient is set to optional. >>> I also cleared /var/lib/puppet/ssl/ client side, not that it should make >>> any difference as this error is on the first run of Puppet. >>> >>> When I try to run Puppet from either of these 3 servers, there is nothing >>> noted in /var/log/apache2/* server side. I have confirmed networking is ok >>> with telnet and also checked that there is traffic with tcpdump. >>> >>> Puppet server is at 2.7.11 and client is also at 2.7.11 both from Ubuntu >>> repositories. >>> >>> Any help would be appreciated to find why these 3 particular servers is >>> giving me problems. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Puppet Users" group. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msg/puppet-users/-/mzcj4gN-AWQJ. >>> To post to this group, send email to [email protected]. >>> To unsubscribe from this group, send email to >>> [email protected]. >>> For more options, visit this group at >>> http://groups.google.com/group/puppet-users?hl=en. >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Puppet Users" group. >> To view this discussion on the web visit >> https://groups.google.com/d/msg/puppet-users/-/ksgzsaL9g1MJ. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]. >> For more options, visit this group at >> http://groups.google.com/group/puppet-users?hl=en. > > > -- > You received this message because you are subscribed to the Google Groups > "Puppet Users" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/puppet-users/-/NsecfOnGBsgJ. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/puppet-users?hl=en. -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
