A trivial s/{pve}/{product}/g again and a additional s/screenshot\/pve-/screenshot\//g to fix the screenshot paths.
Signed-off-by: Christoph Heiss <c.he...@proxmox.com> --- partials/installation-flow.adoc | 47 +++++++++++++++++---------------- 1 file changed, 24 insertions(+), 23 deletions(-) diff --git a/partials/installation-flow.adoc b/partials/installation-flow.adoc index b796676..9a7d1b3 100644 --- a/partials/installation-flow.adoc +++ b/partials/installation-flow.adoc @@ -7,14 +7,14 @@ Please insert the xref:installation_prepare_media[prepared installation media] TIP: Make sure that booting from the installation medium (for example, USB) is enabled in your server's firmware settings. Secure boot needs to be disabled -when booting an installer prior to {pve} version 8.1. +when booting an installer prior to {product} version 8.1. -[thumbnail="screenshot/pve-grub-menu.png"] +[thumbnail="screenshot/grub-menu.png"] -After choosing the correct entry (for example, 'Boot from USB') the {pve} menu -will be displayed, and one of the following options can be selected: +After choosing the correct entry (for example, 'Boot from USB') the {product} +menu will be displayed, and one of the following options can be selected: -Install {pve} (Graphical):: +Install {product} (Graphical):: Starts the normal installation. @@ -22,20 +22,20 @@ TIP: It's possible to use the installation wizard with a keyboard only. Buttons can be clicked by pressing the `ALT` key combined with the underlined character from the respective button. For example, `ALT + N` to press a `Next` button. -Install {pve} (Terminal UI):: +Install {product} (Terminal UI):: Starts the terminal-mode installation wizard. It provides the same overall installation experience as the graphical installer, but has generally better compatibility with very old and very new hardware. -Install {pve} (Terminal UI, Serial Console):: +Install {product} (Terminal UI, Serial Console):: Starts the terminal-mode installation wizard, additionally setting up the Linux kernel to use the (first) serial port of the machine for in- and output. This can be used if the machine is completely headless and only has a serial console available. -[thumbnail="screenshot/pve-tui-installer.png"] +[thumbnail="screenshot/tui-installer.png"] Both modes use the same code base for the actual installation process to benefit from more than a decade of bug fixes and ensure feature parity. @@ -44,21 +44,21 @@ TIP: The 'Terminal UI' option can be used in case the graphical installer does not work correctly, due to e.g. driver issues. See also xref:nomodeset_kernel_param[adding the `nomodeset` kernel parameter]. -Advanced Options: Install {pve} (Graphical, Debug Mode):: +Advanced Options: Install {product} (Graphical, Debug Mode):: Starts the installation in debug mode. A console will be opened at several installation steps. This helps to debug the situation if something goes wrong. To exit a debug console, press `CTRL-D`. This option can be used to boot a live system with all basic tools available. You can use it, for example, to xref:chapter_zfs[repair a degraded ZFS 'rpool'] or fix the -xref:sysboot[bootloader] for an existing {pve} setup. +xref:sysboot[bootloader] for an existing {product} setup. -Advanced Options: Install {pve} (Terminal UI, Debug Mode):: +Advanced Options: Install {product} (Terminal UI, Debug Mode):: Same as the graphical debug mode, but preparing the system to run the terminal-based installer instead. -Advanced Options: Install {pve} (Serial Console Debug Mode):: +Advanced Options: Install {product} (Serial Console Debug Mode):: Same the terminal-based debug mode, but additionally sets up the Linux kernel to use the (first) serial port of the machine for in- and output. @@ -77,9 +77,9 @@ Runs `memtest86+`. This is useful to check if the memory is functional and free of errors. Secure Boot must be turned off in the UEFI firmware setup utility to run this option. -You normally select *Install {pve} (Graphical)* to start the installation. +You normally select *Install {product} (Graphical)* to start the installation. -[thumbnail="screenshot/pve-select-target-disk.png"] +[thumbnail="screenshot/select-target-disk.png"] The first step is to read our EULA (End User License Agreement). Following this, you can select the target hard disk(s) for the installation. @@ -93,15 +93,16 @@ defaults to `ext4`. The installer uses LVM if you select `ext4` or `xfs` as a file system, and offers additional options to restrict LVM space (see xref:advanced_lvm_options[below]). -{pve} can also be installed on ZFS. As ZFS offers several software RAID levels, -this is an option for systems that don't have a hardware RAID controller. The -target disks must be selected in the `Options` dialog. More ZFS specific -settings can be changed under xref:advanced_zfs_options[`Advanced Options`]. +{product} can also be installed on ZFS. As ZFS offers several software RAID +levels, this is an option for systems that don't have a hardware RAID +controller. The target disks must be selected in the `Options` dialog. More ZFS +specific settings can be changed under +xref:advanced_zfs_options[`Advanced Options`]. WARNING: ZFS on top of any hardware RAID is not supported and can result in data loss. -[thumbnail="screenshot/pve-select-location.png"] +[thumbnail="screenshot/select-location.png"] The next page asks for basic configuration options like your location, time zone, and keyboard layout. The location is used to select a nearby download @@ -110,7 +111,7 @@ to auto-detect these settings, so you only need to change them in rare situations when auto-detection fails, or when you want to use a keyboard layout not commonly used in your country. -[thumbnail="screenshot/pve-set-password.png", float="left"] +[thumbnail="screenshot/set-password.png", float="left"] Next the password of the superuser (`root`) and an email address needs to be specified. The password must consist of at least 5 characters. It's highly @@ -132,7 +133,7 @@ For example: - Error messages from periodic 'cron' jobs. -[thumbnail="screenshot/pve-setup-network.png"] +[thumbnail="screenshot/setup-network.png"] All those notification mails will be sent to the specified email address. @@ -142,7 +143,7 @@ that during installation you can either specify an IPv4 or IPv6 address, but not both. To configure a dual stack node, add additional IP addresses after the installation. -[thumbnail="screenshot/pve-installation.png", float="left"] +[thumbnail="screenshot/installation.png", float="left"] The next step shows a summary of the previously selected options. Please re-check every setting and use the `Previous` button if a setting needs to be @@ -152,7 +153,7 @@ After clicking `Install`, the installer will begin to format the disks and copy packages to the target disk(s). Please wait until this step has finished; then remove the installation medium and restart your system. -[thumbnail="screenshot/pve-install-summary.png"] +[thumbnail="screenshot/install-summary.png"] Copying the packages usually takes several minutes, mostly depending on the speed of the installation medium and the target disk performance. -- 2.44.0 _______________________________________________ pve-devel mailing list pve-devel@lists.proxmox.com https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel