Signed-off-by: Maximiliano Sandoval <m.sando...@proxmox.com>
---
Differences from v1:
- Remove fixes in automatically generated files
ha-manager.adoc | 2 +-
notifications.adoc | 12 ++++++------
pve-faq.adoc | 2 +-
pve-firewall.adoc | 2 +-
pve-network.adoc | 4 ++--
pvescheduler.adoc | 2 +-
pvesdn.adoc | 2 +-
pveum.adoc | 2 +-
qm.adoc | 2 +-
vzdump.adoc | 2 +-
10 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/ha-manager.adoc b/ha-manager.adoc
index 66a3b8f..fc20365 100644
--- a/ha-manager.adoc
+++ b/ha-manager.adoc
@@ -1080,7 +1080,7 @@ The CRS is currently used at the following scheduling
points:
new target node for the HA services in that group, matching the adapted
priority constraints.
-- HA service stopped -> start transtion (opt-in). Requesting that a stopped
+- HA service stopped -> start transition (opt-in). Requesting that a stopped
service should be started is an good opportunity to check for the best suited
node as per the CRS algorithm, as moving stopped services is cheaper to do
than moving them started, especially if their disk volumes reside on shared
diff --git a/notifications.adoc b/notifications.adoc
index 25a9391..ca6e70c 100644
--- a/notifications.adoc
+++ b/notifications.adoc
@@ -68,10 +68,10 @@ the Postfix daemon.
The configuration for Sendmail target plugins has the following options:
* `mailto`: E-Mail address to which the notification shall be sent to. Can be
-set multiple times to accomodate multiple recipients.
+set multiple times to accommodate multiple recipients.
* `mailto-user`: Users to which emails shall be sent to. The user's email
address will be looked up in `users.cfg`. Can be set multiple times to
-accomodate multiple recipients.
+accommodate multiple recipients.
* `author`: Sets the author of the E-Mail. Defaults to `Proxmox VE`.
* `from-address`: Sets the from address of the E-Mail. If the parameter is not
set, the plugin will fall back to the `email_from` setting from
@@ -106,10 +106,10 @@ in case of a failed mail delivery.
The configuration for SMTP target plugins has the following options:
* `mailto`: E-Mail address to which the notification shall be sent to. Can be
-set multiple times to accomodate multiple recipients.
+set multiple times to accommodate multiple recipients.
* `mailto-user`: Users to which emails shall be sent to. The user's email
address will be looked up in `users.cfg`. Can be set multiple times to
-accomodate multiple recipients.
+accommodate multiple recipients.
* `author`: Sets the author of the E-Mail. Defaults to `Proxmox VE`.
* `from-address`: Sets the From-addresss of the email. SMTP relays might
require
that this address is owned by the user in order to avoid spoofing.
@@ -221,7 +221,7 @@ a matcher must be true. Defaults to `all`.
[[notification_matchers_calendar]]
Calendar Matching Rules
~~~~~~~~~~~~~~~~~~~~~~~
-A calendar matcher matches the time when a notification is sent agaist a
+A calendar matcher matches the time when a notification is sent against a
configurable schedule.
* `match-calendar 8-12`
@@ -241,7 +241,7 @@ the node.
If a matched metadata field does not exist, the notification will not be
matched.
For instance, a `match-field regex:hostname=.*` directive will only match
-notifications that have an arbitraty `hostname` metadata field, but will
+notifications that have an arbitrary `hostname` metadata field, but will
not match if the field does not exist.
[[notification_matchers_severity]]
diff --git a/pve-faq.adoc b/pve-faq.adoc
index 6f39c3d..63546cc 100644
--- a/pve-faq.adoc
+++ b/pve-faq.adoc
@@ -105,7 +105,7 @@ How can I upgrade {pve} to the next point release?::
Minor version upgrades, for example upgrading from {pve} in version 7.1
to 7.2 or 7.3, can be done just like any normal update.
But you should still check the https://pve.proxmox.com/wiki/Roadmap[release
notes]
-for any relevant noteable, or breaking change.
+for any relevant notable, or breaking change.
+
For the update itself use either the Web UI __Node -> Updates__ panel or
through the CLI with:
diff --git a/pve-firewall.adoc b/pve-firewall.adoc
index 9fb4e46..b428703 100644
--- a/pve-firewall.adoc
+++ b/pve-firewall.adoc
@@ -648,7 +648,7 @@
https://wiki.nftables.org/wiki-nftables/index.php/What_is_nftables%3F[nftables]
rather than iptables.
WARNING: `proxmox-firewall` is currently in tech preview. There might be bugs
or
-incompatibilies with the original firewall. It is currently not suited for
+incompatibilities with the original firewall. It is currently not suited for
production use.
This implementation uses the same configuration files and configuration format,
diff --git a/pve-network.adoc b/pve-network.adoc
index acdcf39..c74f878 100644
--- a/pve-network.adoc
+++ b/pve-network.adoc
@@ -16,7 +16,7 @@ protects you from errors.
A Linux bridge interface (commonly called 'vmbrX') is needed to connect guests
to the underlying physical network. It can be thought of as a virtual switch
which the guests and physical interfaces are connected to. This section
provides
-some examples on how the network can be set up to accomodate different use
cases
+some examples on how the network can be set up to accommodate different use
cases
like redundancy with a xref:sysadmin_network_bond['bond'],
xref:sysadmin_network_vlan['vlans'] or
xref:sysadmin_network_routed['routed'] and
@@ -26,7 +26,7 @@ The xref:chapter_pvesdn[Software Defined Network] is an
option for more complex
virtual networks in {pve} clusters.
WARNING: It's discouraged to use the traditional Debian tools `ifup` and
`ifdown`
-if unsure, as they have some pitfalls like interupting all guest traffic on
+if unsure, as they have some pitfalls like interrupting all guest traffic on
`ifdown vmbrX` but not reconnecting those guest again when doing `ifup` on the
same bridge later.
diff --git a/pvescheduler.adoc b/pvescheduler.adoc
index 1d78ed4..b664848 100644
--- a/pvescheduler.adoc
+++ b/pvescheduler.adoc
@@ -23,7 +23,7 @@ pvescheduler - Proxmox VE Scheduler Daemon
==========================================
endif::manvolnum[]
-This deamon is responsible for starting jobs according to the schedule,
+This daemon is responsible for starting jobs according to the schedule,
such as replication and vzdump jobs.
For vzdump jobs, it gets its configuration from the file `/etc/pve/jobs.cfg`
diff --git a/pvesdn.adoc b/pvesdn.adoc
index 53293b1..39de80f 100644
--- a/pvesdn.adoc
+++ b/pvesdn.adoc
@@ -341,7 +341,7 @@ Exit Nodes Local Routing:: This is a special option if you
need to reach a VM/CT
Advertise Subnets:: Announce the full subnet in the EVPN network.
If you have silent VMs/CTs (for example, if you have multiple IPs and the
- anycast gateway doesn't see traffic from theses IPs, the IP addresses won't
be
+ anycast gateway doesn't see traffic from these IPs, the IP addresses won't be
able to be reached inside the EVPN network). Optional.
Disable ARP ND Suppression:: Don't suppress ARP or ND (Neighbor Discovery)
diff --git a/pveum.adoc b/pveum.adoc
index c115866..3a4ffab 100644
--- a/pveum.adoc
+++ b/pveum.adoc
@@ -194,7 +194,7 @@ required to set a password for this type of user upon
creation.
LDAP
~~~~
-You can also use an external LDAP server for user authentication (for examle,
+You can also use an external LDAP server for user authentication (for example,
OpenLDAP). In this realm type, users are searched under a 'Base Domain Name'
(`base_dn`), using the username attribute specified in the 'User Attribute
Name'
(`user_attr`) field.
diff --git a/qm.adoc b/qm.adoc
index 5a65455..b550888 100644
--- a/qm.adoc
+++ b/qm.adoc
@@ -852,7 +852,7 @@ You can enable the VNC clipboard by setting `clipboard` to
`vnc`.
In order to use the clipboard feature, you must first install the
SPICE guest tools. On Debian-based distributions, this can be achieved
by installing `spice-vdagent`. For other Operating Systems search for it
-in the offical repositories or see: https://www.spice-space.org/download.html
+in the official repositories or see: https://www.spice-space.org/download.html
Once you have installed the spice guest tools, you can use the VNC clipboard
function (e.g. in the noVNC console panel). However, if you're using
diff --git a/vzdump.adoc b/vzdump.adoc
index 7625d08..6f4cfc2 100644
--- a/vzdump.adoc
+++ b/vzdump.adoc
@@ -172,7 +172,7 @@ image when the storage supports it), this has the advantage
that already
allocated parts of the image can be re-used later, which can still help save
quite a bit of space.
-WARNING: On a storage that's not thinly provisioned, for exampple, LVM or ZFS
+WARNING: On a storage that's not thinly provisioned, for example, LVM or ZFS
without the `sparse` option, the full size of the original disk needs to be
reserved for the fleecing image up-front. On a thinly provisioned storage, the
fleecing image can grow to the same size as the original image only if the
guest
--
2.39.2
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
