Am 13.08.24 um 15:57 schrieb Fiona Ebner: > Am 13.08.24 um 12:23 schrieb Alexander Zeidler: >> Signed-off-by: Alexander Zeidler <a.zeid...@proxmox.com> >> --- >> pve-network.adoc | 4 ++-- >> 1 file changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/pve-network.adoc b/pve-network.adoc >> index acdcf39..434430d 100644 >> --- a/pve-network.adoc >> +++ b/pve-network.adoc >> @@ -447,7 +447,7 @@ slaves in the single logical bonded interface such that >> different >> network-peers use different MAC addresses for their network packet >> traffic. >> >> -If your switch support the LACP (IEEE 802.3ad) protocol then we recommend >> using >> +If your switch supports the LACP (IEEE 802.3ad) protocol then we recommend >> using >> the corresponding bonding mode (802.3ad). Otherwise you should generally >> use the >> active-backup mode. >> >> @@ -490,7 +490,7 @@ iface vmbr0 inet static >> >> >> [thumbnail="default-network-setup-bond.svg"] >> -Another possibility it to use the bond directly as bridge port. >> +Another possibility is to use the bond directly as bridge port. >> This can be used to make the guest network fault-tolerant. >> >> .Example: Use a bond as bridge port > > applied, thanks! While adding the missing comma Lukas noted and his R-b.
I also added a follow-up using "as the bridge port" instead of "as bridge port" while at it. _______________________________________________ pve-devel mailing list pve-devel@lists.proxmox.com https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
