--- Begin Message ---
LXC second network isn't getting assigned static ipv6 upon reboot:
I've added second network in the VE web interface.
It shows up correctly in networks and is live:
root@test:/home/mach# cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 208.72.56.240/22
gateway 208.72.56.1
iface eth0 inet6 static
address 2602:ffb8::208:72:56:240/64
gateway 2602:ffb8::1
auto net1
iface net1 inet static
address 208.72.58.11/32
gateway 208.72.56.1
iface net1 inet6 static
address 2602:ffb8::3:2:2/64
gateway 2602:ffb8::1
test:/home/mach# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0@if220: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP group default qlen 1000
link/ether 2e:df:f8:2a:4b:af brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 208.72.56.240/22 brd 208.72.59.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 2602:ffb8::208:72:56:240/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::2cdf:f8ff:fe2a:4baf/64 scope link
valid_lft forever preferred_lft forever
3: net1@if224: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP group default qlen 1000
link/ether 8a:83:f7:1e:6a:c6 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 208.72.58.11/32 scope global net1
valid_lft forever preferred_lft forever
inet6 2602:ffb8::3:2:2/64 scope global
valid_lft forever preferred_lft forever
inet6 2602:ffb8::8883:f7ff:fe1e:6ac6/64 scope global dynamic mngtmpaddr
valid_lft 2591888sec preferred_lft 604688sec
inet6 fe80::8883:f7ff:fe1e:6ac6/64 scope link
valid_lft forever preferred_lft forever
upon reboot net1 static 2602:ffb8::3:2:2/64 ipv6 is missing:
mach@test:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0@if228: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP group default qlen 1000
link/ether 2e:df:f8:2a:4b:af brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 208.72.56.240/22 brd 208.72.59.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 2602:ffb8::208:72:56:240/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::2cdf:f8ff:fe2a:4baf/64 scope link
valid_lft forever preferred_lft forever
3: net1@if232: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP group default qlen 1000
link/ether 8a:83:f7:1e:6a:c6 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 208.72.58.11/32 scope global net1
valid_lft forever preferred_lft forever
inet6 2602:ffb8::8883:f7ff:fe1e:6ac6/64 scope global dynamic mngtmpaddr
valid_lft 2591921sec preferred_lft 604721sec
inet6 fe80::8883:f7ff:fe1e:6ac6/64 scope link
valid_lft forever preferred_lft forever
If I use the web interface and edit net1 ipv6 and change it to a new
address, it will work correctly again till reboot.
I also tried net.ipv6.conf.all.forwarding=1 which just got rid of the
SLAAC address. The assigned static ip was still missing up reboot.
Am I doing something incorrectly, or is this a bug?
--- End Message ---
_______________________________________________
pve-user mailing list
[email protected]
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
