--- Begin Message ---
Hi ,
El 8/9/20 a las 13:18, mj escribió:
We're still on (latest) pve5/ceph, with the three-host 'mesh network'
type. (https://pve.proxmox.com/wiki/Full_Mesh_Network_for_Ceph_Server)
Of course we want to upgrade to 6, and I would like to ask here:
anything special to watch out for? Is it considered a dangerous
upgrade, or should it normally work out fine?
We have of course studied the upgrading wiki page
(https://pve.proxmox.com/wiki/Upgrade_from_5.x_to_6.0)
Just looking for some feedback of those who have done it, preferably
someone also using the full_mesh_network type for ceph.
Was it an easy upgrade..? Anything in particular to watch out for?
We don't use mesh, but upgrades of PVE5 to 6 including Ceph have been
almost trouble free. After upgrade and booting with new kernel, check
that network interface names have not changed; we had some issues with a
10G network card bonded with a 1G interface that we only found by the
hard way (reboot of 1G switch...).
Also, we're having issues with Proxmox tooling for replacing failed OSDs
with wal/db in a shared SSD drive; we have to do it manually:
https://bugzilla.proxmox.com/show_bug.cgi?id=2341
Cheers
Eneko
--
Eneko Lacunza | Tel. 943 569 206
| Email [email protected]
Director Técnico | Site. https://www.binovo.es
BINOVO IT HUMAN PROJECT S.L | Dir. Astigarragako Bidea, 2 - 2º izda.
Oficina 10-11, 20180 Oiartzun
--- End Message ---
_______________________________________________
pve-user mailing list
[email protected]
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
