--- Begin Message ---
Hi Stefan,
So you are saying use (2) cables (one for each VLAN) to the switch? Then from
the switch I already have a single cable going from the switch to the VOIP
Phone which I want to contain VLAN20 & VLAN30.
So my original question was should I run a cable from each NIC Port (VLAN20 &
VLAN30) to the switch and then trunk both VLANs to the VOIP phones which I can
split out the Workstation from each VOIP Phone?
Thanks.
Steve
On Saturday, March 20, 2021, 03:15:35 AM EDT, Stefan M. Radman
<[email protected]> wrote:
Hi Steve
You seem to have plenty of server and switch ports available.
In your case I would suggest to use a separate cable for every VLAN defined on
your switch.
Stefan
On Mar 20, 2021, at 02:23, Steve Frazier <[email protected]> wrote:
Hi Stefan,
I had some hardware issues with my server and had to reinstall. I saved the
interfaces from what you had sent me last and I have a few more questions if
you don't mind.
Below is the last configuration that you sent me.
What I would like to do is run a patch cord from my 192.168.20.0/23 &
192.168.30.0/24 to my switch that will do VLANs if this is the best we of doing
it.
I want to be able to send to my VOIP Phones (192.168.30.0) VLAN30 and Computer
Network (192.168.20.0/23) so that I can run a single cable to my VOIP phones
and then from the VOIP Phone be able to use VLAN30 for VOIP and then use VLAN20
for the computer beside the VOIP Phone.
Would running a single cable from Computer Network NIC and a single cable from
my VOIP NIC (which is my Proxmox) the best way of doing this or what would you
suggest.
Thanks very much, I really appreciate your help.
auto loiface lo inet loopback
iface enp9s0f1 inet manual# Uplink for vmbr0
iface enp11s0f0 inet manual# Uplink for vmbr1
iface enp11s0f1 inet manual# Uplink for vmbr2
iface enp9s0f0 inet manual
iface enp3s0 inet manual
iface enp2s0 inet manual
auto vmbr0iface vmbr0 inet static address 192.168.20.2/23 gateway
192.168.20.1 bridge-ports enp9s0f1 bridge-stp off
bridge-fd 0# Host Management
auto vmbr1iface vmbr1 inet manual bridge-ports enp9s0f0
bridge-stp off bridge-fd 0# Bridge Internet
auto vmbr2iface vmbr2 inet manual bridge-ports enp11s0f1
bridge-stp off bridge-fd 0# Bridge 192.168.30.0/24
<proxmox-network.PNG>
CONFIDENTIALITY NOTICE:This communication may contain privileged and
confidential information, or may otherwise be protected from disclosure, and is
intended solely for use of the intended recipient(s). If you are not the
intended recipient of this communication, please notify the sender that you
have received this communication in error and delete and destroy all copies in
your possession.
--- End Message ---
_______________________________________________
pve-user mailing list
[email protected]
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
