Hi, On Tue, 29 Jun 2021 10:05:44 +0200 Mark Schouten <[email protected]> wrote:
> Hi, > > Op 24-06-2021 om 15:16 schreef Martin Maurer: > > We are pleased to announce the first beta release of Proxmox Virtual > > Environment 7.0! The 7.x family is based on the great Debian 11 > > "Bullseye" and comes with a 5.11 kernel, QEMU 6.0, LXC 4.0, OpenZFS 2.0.4. > > I just upgraded a node in our demo cluster and all seemed fine. Except > for non-working cluster network. I was unable to ping the node through > the cluster interface, pvecm saw no other nodes and ceph was broken. Thanks for the report - could you provide some details on the upgraded node? Mostly which NICs are used - but also the complete hardware -setup (If you prefer you can send me a pvereport to my e-mail) > > However, if I ran tcpdump, ping started working, but not the rest. quite odd - last time I ran into something like this was with an OpenBSD router, where the promisc flag did not get passed down to the physical port of a bridge) the output of `ip -details a` and `ip -details l` might provide some insight > > Interesting situation, which I 'fixed' by disabling vlan-aware-bridge > for that interface. After the reboot, everything works (AFAICS). Thanks for sharing the mitigation (sadly this won't work for everybody) > > If Proxmox wants to debug this, feel free to reach out to me, I can > grant you access to this node so you can check it out. > Kind Regards, stoiko _______________________________________________ pve-user mailing list [email protected] https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
