On 7/26/21 10:50 AM, Samuel Lorch wrote:
Hello,
i Have been trying to pass through a TC-L52BN LTO 5 Tape Drive from
Quantum that's connected to a MegaRaid SAS 1068 LSI Raid Card, this
setup works if i have a bare metal installed Proxmox Backup Server. I
Have IOMMU Enabled on the Proxmox Host and Passed through the Raid Card
to the VM. I can Also see the Raid Card With "lspci" from inside the VM
but the "proxmox-tape drive scan" command and the UI can't seem to find
it. Is there Any Additional Setup i have to do / any Troubleshooting
steps i could follow?
Thanks,
Samuel
Hi,
did not try such a setup myself, but is the passthrough properly
working? I.e. do you see any other disks that are connected?
Is the correct driver loaded for the raid card?
Also what does 'dmesg' show?
kind regards
Dominik
_______________________________________________
pve-user mailing list
[email protected]
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
