Hi, No, because is just change old dongle key license, to the new dongle key.
Do you know i must updating virtio drivers ? or desinstall it ? Regards Le jeu. 7 oct. 2021 à 10:00, Eneko Lacunza via pve-user < [email protected]> a écrit : > > > > ---------- Forwarded message ---------- > From: Eneko Lacunza <[email protected]> > To: [email protected] > Cc: > Bcc: > Date: Thu, 7 Oct 2021 09:59:59 +0200 > Subject: Re: [PVE-User] USB connect an disconnect > Hi David, > > Did you try a different USB port or a different server? > > El 7/10/21 a las 9:51, David Martin escribió: > > Hi, > > > > I have probleme with new dongle to activate server software on VM server. > > > > The dongle is plug on usb proxmox server , i do the new connexion to VM > > with qm, but sometimes the usb dongle disconnect and is reconnect. > > > > The log say this : > > > > Oct 4 07:07:02 SVR-09-VHL kernel: [3597437.842461] kvm [5915]: vcpu1, > > guest rIP: 0xfffff8017afe4a73 kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR > 0x1, > > nop > > Oct 4 07:07:02 SVR-09-VHL kernel: [3597437.842666] kvm [5915]: vcpu1, > > guest rIP: 0xfffff8017afe4a73 kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR > 0x1, > > nop > > Oct 4 07:07:02 SVR-09-VHL kernel: [3597437.842869] kvm [5915]: vcpu1, > > guest rIP: 0xfffff8017afe4a73 kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR > 0x1, > > nop > > Oct 4 07:07:02 SVR-09-VHL kernel: [3597437.843071] kvm [5915]: vcpu1, > > guest rIP: 0xfffff8017afe4a73 kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR > 0x1, > > nop > > Oct 4 07:07:02 SVR-09-VHL kernel: [3597437.843299] kvm [5915]: vcpu1, > > guest rIP: 0xfffff8017afe4a73 kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR > 0x1, > > nop > > Oct 4 07:07:02 SVR-09-VHL kernel: [3597437.843497] kvm [5915]: vcpu1, > > guest rIP: 0xfffff8017afe4a73 kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR > 0x1, > > nop > > Oct 4 07:07:02 SVR-09-VHL kernel: [3597437.843694] kvm [5915]: vcpu1, > > guest rIP: 0xfffff8017afe4a73 kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR > 0x1, > > nop > > Oct 4 07:08:32 SVR-09-VHL kernel: [3597528.155040] usb 1-1.4: reset > > low-speed USB device number 6 using ehci-pci > > Oct 4 07:08:45 SVR-09-VHL kernel: [3597540.866923] usb 1-1.4: reset > > low-speed USB device number 6 using ehci-pci > > Oct 4 09:17:29 SVR-09-VHL kernel: [3605265.304272] usb 1-1.4: reset > > low-speed USB device number 6 using ehci-pci > > Oct 4 09:17:36 SVR-09-VHL kernel: [3605272.072217] usb 1-1.4: reset > > low-speed USB device number 6 using ehci-pci > > Oct 4 09:18:44 SVR-09-VHL kernel: [3605340.378124] vmbr10: port > > 17(tap118i0) entered disabled state > > Oct 4 09:18:45 SVR-09-VHL kernel: [3605340.759466] usb 1-1.4: reset > > low-speed USB device number 6 using ehci-pci > > Oct 4 09:18:45 SVR-09-VHL kernel: [3605341.068469] hid-generic > > 0003:0E50:0002.0008: hiddev0,hidraw0: USB HID v1.00 Device [TDi GmbH - > > Germany USB-Chip] on usb-0000:00:1a.0-1.4/input0 > > > > My pveversion is : > > proxmox-ve: 6.4-1 (running kernel: 5.4.114-1-pve) > > pve-manager: 6.4-13 (running version: 6.4-13/9f411e79) > > pve-kernel-5.4: 6.4-6 > > pve-kernel-helper: 6.4-6 > > pve-kernel-5.4.140-1-pve: 5.4.140-1 > > pve-kernel-5.4.114-1-pve: 5.4.114-1 > > pve-kernel-5.4.78-2-pve: 5.4.78-2 > > pve-kernel-4.15: 5.4-19 > > pve-kernel-4.15.18-30-pve: 4.15.18-58 > > pve-kernel-4.13.13-2-pve: 4.13.13-33 > > ceph-fuse: 12.2.11+dfsg1-2.1+b1 > > corosync: 3.1.2-pve1 > > criu: 3.11-3 > > glusterfs-client: 5.5-3 > > ifupdown: 0.8.35+pve1 > > ksm-control-daemon: 1.3-1 > > libjs-extjs: 6.0.1-10 > > libknet1: 1.20-pve1 > > libproxmox-acme-perl: 1.1.0 > > libproxmox-backup-qemu0: 1.1.0-1 > > libpve-access-control: 6.4-3 > > libpve-apiclient-perl: 3.1-3 > > libpve-common-perl: 6.4-3 > > libpve-guest-common-perl: 3.1-5 > > libpve-http-server-perl: 3.2-3 > > libpve-storage-perl: 6.4-1 > > libqb0: 1.0.5-1 > > libspice-server1: 0.14.2-4~pve6+1 > > lvm2: 2.03.02-pve4 > > lxc-pve: 4.0.6-2 > > lxcfs: 4.0.6-pve1 > > novnc-pve: 1.1.0-1 > > proxmox-backup-client: 1.1.13-2 > > proxmox-mini-journalreader: 1.1-1 > > proxmox-widget-toolkit: 2.6-1 > > pve-cluster: 6.4-1 > > pve-container: 3.3-6 > > pve-docs: 6.4-2 > > pve-edk2-firmware: 2.20200531-1 > > pve-firewall: 4.1-4 > > pve-firmware: 3.3-1 > > pve-ha-manager: 3.1-1 > > pve-i18n: 2.3-1 > > pve-qemu-kvm: 5.2.0-6 > > pve-xtermjs: 4.7.0-3 > > qemu-server: 6.4-2 > > smartmontools: 7.2-pve2 > > spiceterm: 3.1-1 > > vncterm: 1.6-2 > > zfsutils-linux: 2.0.5-pve1~bpo10+1 > > > > Can you help me ? > > > > Best regards > > > > > > > > Eneko Lacunza > Zuzendari teknikoa | Director técnico > Binovo IT Human Project > > Tel. +34 943 569 206 | https://www.binovo.es > Astigarragako Bidea, 2 - 2º izda. Oficina 10-11, 20180 Oiartzun > > https://www.youtube.com/user/CANALBINOVO > https://www.linkedin.com/company/37269706/ > > > > > > ---------- Forwarded message ---------- > From: Eneko Lacunza via pve-user <[email protected]> > To: [email protected] > Cc: Eneko Lacunza <[email protected]> > Bcc: > Date: Thu, 7 Oct 2021 09:59:59 +0200 > Subject: Re: [PVE-User] USB connect an disconnect > _______________________________________________ > pve-user mailing list > [email protected] > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user > -- david martin _______________________________________________ pve-user mailing list [email protected] https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
