--- Begin Message ---
Hi to this group.
I am looking for some help with the following issue:
Running PVE 7.2-7 (the issue happened on that system before with earlier
PVE 6.x versions), the first VM to start up (Start at boot, order=1,
up=120) fails to start after the entire server has been down (i.e. power
outage) and is freshly started.
The other VMs are starting fine later in the process. Once we are aware
that there is an issue, we can start the VM either by CLI "qm start xxx"
or GUI without problem. There must be a timing issue which we cannot
figure out yet.
Below is (shortened) reported error. Happy to post the complete message
if helpful.
I do not understand for what resource there is a timeout.
Thanks for any help.
Michael
TASK ERROR: start failed: command '/usr/bin/kvm -id 254 -name DMT254SV
-no-shutdown -chardev
'socket,id=qmp,path=/var/run/qemu-server/254.qmp,server=on,wait=off'
-mon 'chardev=qmp,mode=control'
.. cut ...
-device
'virtio-blk-pci,drive=drive-virtio1,id=virtio1,bus=pci.0,addr=0xb'
-netdev
'type=tap,id=net0,ifname=tap254i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown'
-device
'e1000,mac=3E:4A:33:72:72:FD,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300'
-machine 'type=pc+pve0'' failed: got timeout
--- End Message ---
_______________________________________________
pve-user mailing list
[email protected]
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
