--- Begin Message ---
I’ve been using LVM over iSCSI multipath [0] as an alternative to LVM over FC
and it just works (even in the same cluster).
That said it would be great to have iSCSI multipath integrated into the PVE
tooling and GUI.
Cheers
Stefan
> On Jul 26, 2023, at 11:50, Alwin Antreich via pve-user
> <[email protected]> wrote:
>
>
> From: "Alwin Antreich" <[email protected]>
> Subject: Re: [PVE-User] DeviceMapper devices get filtered by Proxmox
> Date: July 26, 2023 at 11:50:13 GMT+2
> To: [email protected], "Proxmox VE user list"
> <[email protected]>
>
>
> Hi Uwe,
>
> July 26, 2023 10:37 AM, "Uwe Sauter" <[email protected]> wrote:
>
>> I need to disagree on that one. The WebUI disk overview does not show the
>> multipath devices, only
>> the member disks. Yes, there is a comment stating that a device is a
>> multipath member but no way to
>> select the multipath device itself. So, from a users point of view, PVE does
>> not support multipath,
>> it just recognizes multipath members.
>> And the Create ZFS and Create LVM Volume Group setup pop-ups show neither
>> multipath members nor
>> multipath devices.
> I agree, while you can use multipath [0], it isn't integrated into the PVE
> tooling.
>
> Anyway, I hope your PoC turns out as expected.
>
> Cheers,
> Alwin
>
> [0] https://pve.proxmox.com/wiki/ISCSI_Multipath
>
>
>
> _______________________________________________
> pve-user mailing list
> [email protected]
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
--- End Message ---
_______________________________________________
pve-user mailing list
[email protected]
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
