Mandi! Falko Trojahn In chel di` si favelave... > you surely don't have any udev rules for this interface > e.g. left over from former system?
No, i've not altered in any way udev rules... Mandi! Roland In chel di` si favelave... > iirc, that can be a matter of the bios version installed. > https://linux.dell.com/files/whitepapers/consistent_network_device_naming_in_linux.pdf We have upgarded 8 identical servers, upgrading to identical bios version; this is the only one that have this trouble. Anyway, i've found some more info: root@svpve2:~# ip link show | egrep '[0-9]+: ' 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 2: ens1f0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP mode DEFAULT group default qlen 1000 3: eth1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond1 state UP mode DEFAULT group default qlen 1000 4: ens5f0np0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq master bond2 state UP mode DEFAULT group default qlen 1000 5: eno1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP mode DEFAULT group default qlen 1000 6: eno2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond1 state UP mode DEFAULT group default qlen 1000 7: ens5f1np1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq master bond2 state UP mode DEFAULT group default qlen 1000 8: idrac: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN mode DEFAULT group default qlen 1000 9: bond2: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 9000 qdisc noqueue state UP mode DEFAULT group default qlen 1000 10: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue master vmbr0 state UP mode DEFAULT group default qlen 1000 11: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 12: bond1: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue master vmbr1 state UP mode DEFAULT group default qlen 1000 13: vmbr1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 [...] interface 'ens1f1' does not desappear, simply get not 'renamed' on boot, and remain 'eth1'. I've tried a manual: ip link set eth1 master bond1 and interface start working as expected. If logs can be useful, if it is better to fire up a bug, say me. Just i'm here, i've found also: root@svpve2:~# ip addr show ens1f0 2: ens1f0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether f4:ee:08:24:3a:ff brd ff:ff:ff:ff:ff:ff permaddr 5c:6f:69:0f:99:78 altname enp1s0f0 and 'enp1s0f0' in 'altname' was the old interface name, that was in /etc/network/interfaces; but at boot bond does not bind it, i was forced to use the 'new' name. 'altname' work only insome aspect? Or simply, does not work for bonds? Thanks. -- _______________________________________________ pve-user mailing list [email protected] https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
