On 14-10-28 10:03 AM, Adam Thompson wrote:
I'm seeing ridiculous I/O latency after out'ing and re-in'ing a disk
in the CEPH array; the OSD monitor tab shows two OSDs (i.e. disks)
having latency above 10msec - they're both in the 200ms range - but
reading a single uncached sector from a virtual disk takes >10sec.
It's bad enough that all my virtualized DNS servers are timing out and
this, of course, directly impacts service.
During normal (non-rebuild, non-rebalance) operations, CEPH is not
terribly fast to write, but delivers acceptable read speeds.
Where do I start looking for problems? Are there any knobs I should
be tweaking for CEPH?
A related question: to proactively replace a disk, I'm doing
Stop->Out->Remove / swap disk / Create OSD. Is that a viable
procedure? Other than the rebuild I/O starving regular reads, it seems
to be working...
--
-Adam Thompson
[email protected]
_______________________________________________
pve-user mailing list
[email protected]
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
