> On Jul 27, 2018, at 2:58 PM, Woods, Ken A (DNR) <ken.wo...@alaska.gov> wrote:
>
> What's the output of "pvecm status”?
root@pve01:~# pvwcm status
-bash: pvwcm: command not found
root@pve01:~# pvecm status
Quorum information
------------------
Date: Fri Jul 27 19:09:38 2018
Quorum provider: corosync_votequorum
Nodes: 1
Node ID: 0x00000001
Ring ID: 1/56
Quorate: Yes
Votequorum information
----------------------
Expected votes: 1
Highest expected: 1
Total votes: 1
Quorum: 1
Flags: Quorate
Membership information
----------------------
Nodeid Votes Name
0x00000001 1 2001:470:e2fc:10::160 (local)
> Same version on both nodes?
Yes
> Time synchronized?
Yes. NTP
> How are you adding the second node? Try "pvecm add XXX.XXX.XXX.XXX”
Both through the GUI and from the command line. Oddity is V6 and V4 errors are
different.
> Is multicast enabled? Does omping work and not drop packets?
>
Need to look in to that. moping returns no messages.
It’s on a dumb switch. I’ll reconfig on to an intelligent switch I can enable
mcast on
EKG
>
> (Also, can somebody fix the typo of the missing "s" in "Etablishing API
> connection with host XXXXX")
>
> kw
>
>
> -----Original Message-----
> From: pve-user [mailto:pve-user-boun...@pve.proxmox.com] On Behalf Of Eric
> Germann
> Sent: Friday, July 27, 2018 10:45 AM
> To: pve-user@pve.proxmox.com
> Subject: [PVE-User] Unable to join cluster
>
> I have two new Proxmox boxes in a virgin cluster. No VM’s, etc. The only
> thing setup on them is networking.
>
> I created a cluster on the first one successfully.
>
> However, I try to join the second to the cluster, I get the following error:
>
> Starting worker failed: unable to parse worker upid
> 'UPID:pve02:00001876:00026B6B:5B5B6751:clusterjoin:2001:470:e2fc:10::160:root@pam:'
> (500)
>
> The nodes are all IPv4 and IPv6 enabled. The cluster IP as show in the
> config is IPv6. Is this the issue?
>
> If I put the v6 address in brackets, same error.
>
> If I substitute the IPv4 address, I get the following error
>
> Etablishing API connection with host '172.28.10.160'
> TASK ERROR: 401 401 authentication failure
>
> Thoughts? They haven’t been up more than 1 hr when this occurs.
>
> Thanks in advance
>
> EKg
>
> _______________________________________________
> pve-user mailing list
> pve-user@pve.proxmox.com
> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
_______________________________________________
pve-user mailing list
pve-user@pve.proxmox.com
https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
