Ok , this is what I set during installation process: hd size: 2000. swapsize: blank maxroot: blank minfree: 1000 maxvz: 1000.
After install , this is what I got: root@pve:~# vgdisplay -v pve --- Volume group --- VG Name pve System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 7 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 1.95 TiB PE Size 4.00 MiB Total PE 511871 Alloc PE / Size 255872 / 999.50 GiB Free PE / Size 255999 / <1000.00 GiB VG UUID zPby6x-GbsC-celw-r6ZU-3t1F-DLjX-i8CBv2 --- Logical volume --- LV Path /dev/pve/swap LV Name swap VG Name pve LV UUID ukZpGT-Mtxo-vWes-OUGT-tOXt-Nsd1-Wnrszd LV Write Access read/write LV Creation host, time proxmox, 2020-02-25 13:46:43 -0300 LV Status available # open 2 LV Size 8.00 GiB Current LE 2048 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 --- Logical volume --- LV Path /dev/pve/root LV Name root VG Name pve LV UUID 2tQrYn-igFx-gqU1-cc8j-wEM6-3q4o-3IpVKe LV Write Access read/write LV Creation host, time proxmox, 2020-02-25 13:46:43 -0300 LV Status available # open 1 LV Size 96.00 GiB ############### I need to get this partition to 1TB. Current LE 24576 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1 --- Logical volume --- LV Name data VG Name pve LV UUID XQfOWm-L3fC-EtcE-4I7e-euC9-NH2g-fnWBqg LV Write Access read/write LV Creation host, time proxmox, 2020-02-25 13:46:44 -0300 LV Pool metadata data_tmeta LV Pool data data_tdata LV Status available # open 0 LV Size <877.59 GiB Allocated pool data 0.00% Allocated metadata 0.22% Current LE 224662 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:4 --- Physical volumes --- PV Name /dev/sda3 PV UUID ZpwZGJ-h774-VKh8-f81D-Evyi-d0jD-7stBLa PV Status allocatable Total PE / Free PE 511871 / 255999 How to set "Hard disk options" to accomplish my desired schemme: LVM (/dev/pve/root) = 1T. LVM-thin = 1TB. Remaining =< 3TB. reserved for future use. Regards, Leandro. El mar., 25 feb. 2020 a las 16:03, <proxmox-u...@mattern.org> escribió: > Hi, > > imho you should use a Debian Buster install CD and create a layout > whatever you want. The Debian installer is really flexible. You can't do > LVM Thin there but a LVM-Thin Pool is only a special LVM LV. So you can > create two LVs and convert one LV to a Thin-Pool later > (https://pve.proxmox.com/wiki/Storage:_LVM_Thin). Or create two VGs. > > Then go on with: > https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Buster. > > Regards > > > Am 25.02.20 um 18:15 schrieb Leandro Roggerone: > > Hi guys, Im trying to get my pve ready for use. > > I want to create following layout on mi 5TB drive): > > 1T for LVM data > > 1T For LVM-thin. > > 3T Remaining for future partitioning. > > So at the hard disk options on the installer I chose : > > hdsize 2000 (GB). > > swapsize (left blank). > > maxroot (left blank). > > min free: 1000 > > maxxvz:1000. > > > > After install process finished and access to web gui I have: > > pve > > local(pve) Usage 1.76% (1.66 GiB of 93.99 GiB) > > (this is not OK). > > local-lvm (pve) Usage 0.00% (0 B of 877.59 GiB) (this is > very > > close to 1Tb .. so its ok). > > > > Question is , how should I set hard disk options during installation > > process to accomplish wanted layout ? > > Regards, > > Leandro. > > _______________________________________________ > > pve-user mailing list > > pve-user@pve.proxmox.com > > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > _______________________________________________ > pve-user mailing list > pve-user@pve.proxmox.com > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > _______________________________________________ pve-user mailing list pve-user@pve.proxmox.com https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user