Sorry for the delay. With the SVN update I was able to compile it. The
PVS2 server starts but it is not functional up to now. Maybe I made a
mistake at some point. I played around a bit with the fstab entry and
with different server configurations but I was not able to fix this
issue up to now. These are the steps I did:
$ svn update
Updating '.':
U src/apps/kernel/linux/pvfs2-client-core.c
Updated to revision 11687.
$ ./prepare
configure script successfully regenerated
$ ./configure --enable-fuse
...
***** Displaying PVFS Configuration Information *****
------------------------------------------------------
PVFS2 configured to build karma gui : no
PVFS2 configured to build visualization tools : no
PVFS2 configured to perform coverage analysis : no
PVFS2 configured for aio threaded callbacks : yes
PVFS2 configured to use FUSE : yes
PVFS2 configured for the 2.6/3 kernel module : no
PVFS2 configured for the 2.4.x kernel module : no
PVFS2 configured for using the mmap-ra-cache : no
PVFS2 configured for resetting file position : no
PVFS2 will use workaround for redhat 2.4 kernels : no
PVFS2 will use workaround for buggy NPTL : no
PVFS2 server capability cache enabled : yes
PVFS2 server credential cache enabled : no
PVFS2 server certificate cache enabled : no
PVFS2 configured with key-based security : no
PVFS2 configured with certificate-based security : no
PVFS2 server will be built : yes
PVFS2 configured with profiling enabled : no
PVFS2 user interface libraries will be built : yes
PVFS2 symbolic libraries will be built : no
PVFS2 user environment variables enabled : no
PVFS2 user interface library cache enabled : no
Malloc will be redefined : yes
PVFS2 client JNI enabled : no
PVFS2 version string: 2.9.0-orangefs-2015-02-03-183255
$ make
...
LD src/apps/fuse/pvfs2fuse
GENCONFIG src/server/simple.conf
GENCONFIG examples/fs.conf
$ sudo make install
...
install -d /usr/local/sbin
install -m 755 ./src/apps/admin/pvfs2-start-all /usr/local/sbin
install -m 755 ./src/apps/admin/pvfs2-stop-all /usr/local/sbin
install -m 755 src/apps/admin/pvfs2-mkspace
src/apps/admin/pvfs2-migrate-collection
src/apps/admin/pvfs2-change-fsid src/apps/admin/pvfs2-showcoll
/usr/local/bin
install -m 755 src/apps/kernel/linux/pvfs2-client
src/apps/kernel/linux/pvfs2-client-core /usr/local/sbin
install -m 755 src/server/pvfs2-server /usr/local/sbin
rm -f /usr/local/bin/.pvfs2-genconfig-* &> /dev/null
# create etc dir under install dir
install -d /usr/local/etc
$ sudo mkdir /pvfs2-storage-space
$ sudo pvfs2-genconfig --protocol tcp --tcpport 3334 --storage
/pvfs2-storage-space --logfile /tmp/pvfs2-server.log --ioservers pi81
--metaservers pi81 /etc/pvfs2-fs.conf --quiet
$ sudo pvfs2-server /etc/pvfs2-fs.conf -f[S 02/04/2015 10:18:34] PVFS2
Server on node pi81 version 2.9.0-orangefs-2015-02-03-183255
starting...
*** WARNING *** *** WARNING *** *** WARNING ***
*The MetadataStorageSpace path /pvfs2-storage-space appears
to be on the root device.
*It is recommended that the meta data be
stored on a dedicated partition.
*If you have a dedicated partition setup,
please be sure it is mounted.
*** WARNING *** *** WARNING *** *** WARNING ***
*The DataStorageSpace path /pvfs2-storage-space appears
to be on the root device.
*It is recommended that the data be
stored on a dedicated partition.
*If you have a dedicated partition setup,
please be sure it is mounted.
[D 02/04/2015 10:18:34] PVFS2 Server: storage space created. Exiting.
$ sudo pvfs2-server /etc/pvfs2-fs.conf
[S 02/04/2015 10:18:47] PVFS2 Server on node pi81 version
2.9.0-orangefs-2015-02-03-183255 starting...
$ ps xa | grep pvfs2-server
6522 ? Ssl 0:07 pvfs2-server /etc/pvfs2-fs.conf
$ cat /tmp/pvfs2-server.log
[D 02/04/2015 10:18:47] PVFS2 Server version
2.9.0-orangefs-2015-02-03-183255 starting.
$ sudo mkdir /mnt/pvfs2
$ sudo /bin/sh -c 'echo "tcp://localhost:3334/pvfs2-fs /mnt/pvfs2
pvfs2 defaults,noauto 0 0" >> /etc/pvfs2tab'
$ cat /etc/fstab | grep pvfs
tcp://localhost:3334/pvfs2-fs /mnt/pvfs2 pvfs2 defaults,noauto 0 0
$ pvfs2-ping -m /mnt/pvfs2
(1) Parsing tab file...
(2) Initializing system interface...
(3) Initializing each file system found in tab file: /etc/fstab...
PVFS2 servers: tcp://localhost:3334
Storage name: pvfs2-fs
Local mount point: /mnt/pvfs2
[E 10:48:25.392599] Warning:
Cannot retrieve information about filesystem pvfs2-fs at tab entry:
tcp://localhost:3334
[E 10:48:25.399835]
HINTS: If you're sure that your pvfstab file contains valid information,
please make sure that you are not out of disk space and that you have
write permissions in the current directory or in the /tmp directory
/mnt/pvfs2: FAILURE!
Failure: could not initialze at least one of the target file systems.
(4) Searching for /mnt/pvfs2 in pvfstab...
[E 10:48:25.402664] Error: /mnt/pvfs2 resides on a PVFS2 file system
that has not yet been initialized.
Failure: could not find filesystem for /mnt/pvfs2 in pvfs2tab /etc/fstab
Entry 0: /mnt/pvfs2
At this point I'm stuck now.
Best Regards
Christian
2015-02-03 16:39 GMT+01:00 James Burton <[email protected]>:
> Mike,
>
> Is the kernel module supposed to be compiling after the SVN update or is
> that still not working?
>
> Jim
>
> On Mon, Feb 2, 2015 at 4:35 PM, Mike Marshall <[email protected]> wrote:
>>
>> Hello Prof. Baun...
>>
>> I think I fixed what is causing your problem, so if you do an svn update,
>> you can give it a try.
>>
>> I inadvertently put the pvfs2_khandle_from_handle function inside of an
>> ifdef, and one of your --disables made it disappear.
>>
>> -Mike
>>
>> On Sat, Jan 31, 2015 at 3:53 PM, Prof. Dr. Christian Baun
>> <[email protected]> wrote:
>> > Hello
>> >
>> > when I understood Jims reply correct, it should be possible to compile
>> > the server and maybe the FUSE client on arm. I tried it this way with
>> > the latest SVN revision and now I'm stuck at this point.
>> >
>> > $ mkdir /home/pi/orangefs_svn
>> > $ cd /home/pi/orangefs_svn
>> > $ svn checkout http://www.orangefs.org/svn/orangefs/trunk
>> > /home/pi/orangefs_svn
>> > $ ./prepare
>> > configure script successfully regenerated
>> > $ ./configure --enable-fuse
>> > ...
>> > ***** Displaying PVFS Configuration Information *****
>> > ------------------------------------------------------
>> > PVFS2 configured to build karma gui : no
>> > PVFS2 configured to build visualization tools : no
>> > PVFS2 configured to perform coverage analysis : no
>> > PVFS2 configured for aio threaded callbacks : yes
>> > PVFS2 configured to use FUSE : yes
>> > PVFS2 configured for the 2.6/3 kernel module : no
>> > PVFS2 configured for the 2.4.x kernel module : no
>> > PVFS2 configured for using the mmap-ra-cache : no
>> > PVFS2 configured for resetting file position : no
>> > PVFS2 will use workaround for redhat 2.4 kernels : no
>> > PVFS2 will use workaround for buggy NPTL : no
>> > PVFS2 server capability cache enabled : yes
>> > PVFS2 server credential cache enabled : no
>> > PVFS2 server certificate cache enabled : no
>> > PVFS2 configured with key-based security : no
>> > PVFS2 configured with certificate-based security : no
>> > PVFS2 server will be built : yes
>> > PVFS2 configured with profiling enabled : no
>> > PVFS2 user interface libraries will be built : yes
>> > PVFS2 symbolic libraries will be built : no
>> > PVFS2 user environment variables enabled : no
>> > PVFS2 user interface library cache enabled : no
>> > Malloc will be redefined : yes
>> > PVFS2 client JNI enabled : no
>> >
>> > PVFS2 version string: 2.9.0-orangefs-2015-01-31-084642
>> >
>> > $ make
>> > ...
>> > CC src/apps/kernel/linux/pvfs2-client.o
>> > LD src/apps/kernel/linux/pvfs2-client
>> > CC src/apps/kernel/linux/pvfs2-client-core.o
>> > src/apps/kernel/linux/pvfs2-client-core.c: In function
>> > ‘package_downcall_members’:
>> > src/apps/kernel/linux/pvfs2-client-core.c:2931:17: warning: implicit
>> > declaration of function ‘pvfs2_khandle_from_handle’
>> > [-Wimplicit-function-declaration]
>> > LD src/apps/kernel/linux/pvfs2-client-core
>> > src/apps/kernel/linux/pvfs2-client-core.o: In function
>> > `package_downcall_members':
>> > /home/pi/orangefs_svn/src/apps/kernel/linux/pvfs2-client-core.c:3057:
>> > undefined reference to `pvfs2_khandle_from_handle'
>> > /home/pi/orangefs_svn/src/apps/kernel/linux/pvfs2-client-core.c:3114:
>> > undefined reference to `pvfs2_khandle_from_handle'
>> > /home/pi/orangefs_svn/src/apps/kernel/linux/pvfs2-client-core.c:3222:
>> > undefined reference to `pvfs2_khandle_from_handle'
>> > collect2: ld returned 1 exit status
>> > Makefile:1058: recipe for target
>> > 'src/apps/kernel/linux/pvfs2-client-core' failed
>> > make: *** [src/apps/kernel/linux/pvfs2-client-core] Error 1
>> >
>> > The same result is when I try to build just the fuse client via
>> >
>> > $ ./configure --disable-server --disable-usrint --disable-opt
>> > --enable-fuse
>> > $ make
>> >
>> > What I can try to solve this issue?
>> >
>> > Best Regards and thanks for any help.
>> > Christian
>> >
>> > ---
>> > Prof. Dr. Christian Baun
>> > http://www.christianbaun.de
>> > Frankfurt University of Applied Sciences
>> > Nibelungenplatz 1, 60318 Frankfurt am Main
>> >
>> >
>> >
>> > 2015-01-30 23:52 GMT+01:00 James Burton <[email protected]>:
>> >> OrangeFS is not supported and has not been tested on Raspian.
>> >>
>> >> That being said, we have gotten some inquiries about this and there was
>> >> a
>> >> recent change in SVN that fixes this problem and allows OrangeFS to
>> >> build.
>> >> (The problem was caused by a function call that is implemented for
>> >> Intel
>> >> processors, but not for ARM. See http://linux.die.net/man/2/fadvise64)
>> >>
>> >> You can get the most recent version from the following svn repository
>> >>
>> >> http://www.orangefs.org/svn/orangefs/trunk
>> >>
>> >> Currently, the kernel module will not compile on Raspian, but you may
>> >> be
>> >> able to mount the filesystem via fuse.
>> >>
>> >> Good luck!
>> >>
>> >> Jim Burton
>> >>
>> >> On Fri, Jan 30, 2015 at 5:40 PM, Prof. Dr. Christian Baun
>> >> <[email protected]> wrote:
>> >>>
>> >>> Hello,
>> >>>
>> >>> I try to install OrangeFS from source on a Raspberry Pi with Raspbian
>> >>> as operating system. During the make step, an error occurs at this
>> >>> point I'm stuck now. My steps are:
>> >>>
>> >>> $ uname -r
>> >>> 3.12.35+
>> >>>
>> >>> $ sudo wget -P /usr/src/
>> >>> http://www.orangefs.org/downloads/LATEST/source/orangefs-2.9.0.tar.gz
>> >>>
>> >>> $ sudo tar -xvzf /usr/src/orangefs-2.9.0.tar.gz -C /usr/src/
>> >>> $ sudo /bin/sh -c 'cd /usr/src/orangefs-2.9.0; ./configure
>> >>> -with-kernel=/usr/src/linux-source-3.12'
>> >>> …
>> >>> ***** Displaying PVFS Configuration Information *****
>> >>> ------------------------------------------------------
>> >>> PVFS2 configured to build karma gui : no
>> >>> PVFS2 configured to build visualization tools : no
>> >>> PVFS2 configured to perform coverage analysis : no
>> >>> PVFS2 configured for aio threaded callbacks : yes
>> >>> PVFS2 configured to use FUSE : no
>> >>> PVFS2 configured for the 2.6/3 kernel module : yes
>> >>> PVFS2 configured for the 2.4.x kernel module : no
>> >>> PVFS2 configured for using the mmap-ra-cache : no
>> >>> PVFS2 configured for resetting file position : no
>> >>> PVFS2 will use workaround for redhat 2.4 kernels : no
>> >>> PVFS2 will use workaround for buggy NPTL : no
>> >>> PVFS2 server capability cache enabled : yes
>> >>> PVFS2 server credential cache enabled : no
>> >>> PVFS2 server certificate cache enabled : no
>> >>> PVFS2 configured with key-based security : no
>> >>> PVFS2 configured with certificate-based security : no
>> >>> PVFS2 server will be built : yes
>> >>> PVFS2 configured with profiling enabled : no
>> >>> PVFS2 user interface libraries will be built : yes
>> >>> PVFS2 symbolic libraries will be built : no
>> >>> PVFS2 user environment variables enabled : no
>> >>> PVFS2 user interface library cache enabled : no
>> >>> Malloc will be redefined : yes
>> >>> PVFS2 client JNI enabled : no
>> >>>
>> >>> PVFS2 version string: 2.9.0-
>> >>>
>> >>> $ sudo make
>> >>> ...
>> >>> CC src/io/dev/pint-dev.o
>> >>> RANLIB lib/libpvfs2.a
>> >>> CC src/client/usrint/pvfs-path.o
>> >>> CC src/client/usrint/mmap.o
>> >>> CC src/client/usrint/openfile-util.o
>> >>> src/client/usrint/openfile-util.c: In function ‘my_glibc_fadvise64’:
>> >>> src/client/usrint/openfile-util.c:292:20: error: ‘SYS_fadvise64’
>> >>> undeclared (first use in this function)
>> >>> src/client/usrint/openfile-util.c:292:20: note: each undeclared
>> >>> identifier is reported only once for each function it appears in
>> >>> src/client/usrint/openfile-util.c:293:1: warning: control reaches end
>> >>> of non-void function [-Wreturn-type]
>> >>> Makefile:1082: recipe for target 'src/client/usrint/openfile-util.o'
>> >>> failed
>> >>> make: *** [src/client/usrint/openfile-util.o] Error 1
>> >>>
>> >>>
>> >>> What can I do to handle this issue?
>> >>>
>> >>> Thanks for any help.
>> >>>
>> >>> Christian
>> >>>
>> >>> ---
>> >>> Prof. Dr. Christian Baun
>> >>> http://www.christianbaun.de
>> >>> Frankfurt University of Applied Sciences
>> >>> Nibelungenplatz 1, 60318 Frankfurt am Main
>> >>>
>> >>> _______________________________________________
>> >>> Pvfs2-users mailing list
>> >>> [email protected]
>> >>> http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users
>> >>
>> >>
>> >
>> > ---
>> > Prof. Dr. Christian Baun
>> > http://www.christianbaun.de
>> > Frankfurt University of Applied Sciences
>> > Nibelungenplatz 1, 60318 Frankfurt am Main
>> > Büro: +49-69-1533-3196
>> > Privat: +49-6235-9591351
>> > Mobil: +49-170-2817531
>> >
>> > Die 2. Auflage von "Computernetze kompakt" ist erschienen.
>> > ISBN 978-3-642-41652-1. Springer Vieweg. Februar 2014
>> >
>> >
>> > 2015-01-30 23:52 GMT+01:00 James Burton <[email protected]>:
>> >> OrangeFS is not supported and has not been tested on Raspian.
>> >>
>> >> That being said, we have gotten some inquiries about this and there was
>> >> a
>> >> recent change in SVN that fixes this problem and allows OrangeFS to
>> >> build.
>> >> (The problem was caused by a function call that is implemented for
>> >> Intel
>> >> processors, but not for ARM. See http://linux.die.net/man/2/fadvise64)
>> >>
>> >> You can get the most recent version from the following svn repository
>> >>
>> >> http://www.orangefs.org/svn/orangefs/trunk
>> >>
>> >> Currently, the kernel module will not compile on Raspian, but you may
>> >> be
>> >> able to mount the filesystem via fuse.
>> >>
>> >> Good luck!
>> >>
>> >> Jim Burton
>> >>
>> >> On Fri, Jan 30, 2015 at 5:40 PM, Prof. Dr. Christian Baun
>> >> <[email protected]> wrote:
>> >>>
>> >>> Hello,
>> >>>
>> >>> I try to install OrangeFS from source on a Raspberry Pi with Raspbian
>> >>> as operating system. During the make step, an error occurs at this
>> >>> point I'm stuck now. My steps are:
>> >>>
>> >>> $ uname -r
>> >>> 3.12.35+
>> >>>
>> >>> $ sudo wget -P /usr/src/
>> >>> http://www.orangefs.org/downloads/LATEST/source/orangefs-2.9.0.tar.gz
>> >>>
>> >>> $ sudo tar -xvzf /usr/src/orangefs-2.9.0.tar.gz -C /usr/src/
>> >>> $ sudo /bin/sh -c 'cd /usr/src/orangefs-2.9.0; ./configure
>> >>> -with-kernel=/usr/src/linux-source-3.12'
>> >>> …
>> >>> ***** Displaying PVFS Configuration Information *****
>> >>> ------------------------------------------------------
>> >>> PVFS2 configured to build karma gui : no
>> >>> PVFS2 configured to build visualization tools : no
>> >>> PVFS2 configured to perform coverage analysis : no
>> >>> PVFS2 configured for aio threaded callbacks : yes
>> >>> PVFS2 configured to use FUSE : no
>> >>> PVFS2 configured for the 2.6/3 kernel module : yes
>> >>> PVFS2 configured for the 2.4.x kernel module : no
>> >>> PVFS2 configured for using the mmap-ra-cache : no
>> >>> PVFS2 configured for resetting file position : no
>> >>> PVFS2 will use workaround for redhat 2.4 kernels : no
>> >>> PVFS2 will use workaround for buggy NPTL : no
>> >>> PVFS2 server capability cache enabled : yes
>> >>> PVFS2 server credential cache enabled : no
>> >>> PVFS2 server certificate cache enabled : no
>> >>> PVFS2 configured with key-based security : no
>> >>> PVFS2 configured with certificate-based security : no
>> >>> PVFS2 server will be built : yes
>> >>> PVFS2 configured with profiling enabled : no
>> >>> PVFS2 user interface libraries will be built : yes
>> >>> PVFS2 symbolic libraries will be built : no
>> >>> PVFS2 user environment variables enabled : no
>> >>> PVFS2 user interface library cache enabled : no
>> >>> Malloc will be redefined : yes
>> >>> PVFS2 client JNI enabled : no
>> >>>
>> >>> PVFS2 version string: 2.9.0-
>> >>>
>> >>> $ sudo make
>> >>> ...
>> >>> CC src/io/dev/pint-dev.o
>> >>> RANLIB lib/libpvfs2.a
>> >>> CC src/client/usrint/pvfs-path.o
>> >>> CC src/client/usrint/mmap.o
>> >>> CC src/client/usrint/openfile-util.o
>> >>> src/client/usrint/openfile-util.c: In function ‘my_glibc_fadvise64’:
>> >>> src/client/usrint/openfile-util.c:292:20: error: ‘SYS_fadvise64’
>> >>> undeclared (first use in this function)
>> >>> src/client/usrint/openfile-util.c:292:20: note: each undeclared
>> >>> identifier is reported only once for each function it appears in
>> >>> src/client/usrint/openfile-util.c:293:1: warning: control reaches end
>> >>> of non-void function [-Wreturn-type]
>> >>> Makefile:1082: recipe for target 'src/client/usrint/openfile-util.o'
>> >>> failed
>> >>> make: *** [src/client/usrint/openfile-util.o] Error 1
>> >>>
>> >>>
>> >>> What can I do to handle this issue?
>> >>>
>> >>> Thanks for any help.
>> >>>
>> >>> Christian
>> >>>
>> >>> ---
>> >>> Prof. Dr. Christian Baun
>> >>> http://www.christianbaun.de
>> >>> Frankfurt University of Applied Sciences
>> >>> Nibelungenplatz 1, 60318 Frankfurt am Main
>> >>>
>> >>> _______________________________________________
>> >>> Pvfs2-users mailing list
>> >>> [email protected]
>> >>> http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users
>> >>
>> >>
>> >
>> > _______________________________________________
>> > Pvfs2-users mailing list
>> > [email protected]
>> > http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users
>>
>> _______________________________________________
>> Pvfs2-users mailing list
>> [email protected]
>> http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users
>
>
_______________________________________________
Pvfs2-users mailing list
[email protected]
http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users
