On Wed, 4 Oct 2006, [EMAIL PROTECTED] wrote: > Hi, > > Hm... just did a quick test. Compiled latest driver snapshot > (pvrusb2-mci-20061003). Reboot (just to make things clear and to test if > coldplug still works fine). Then "screen" and "cat /dev/v4l/video0 > > testc.mpg". after about 20 minutes I got: > cat: /dev/v4l/video0: Input/output error
How reproducible is this? Generally if streaming works for even a few seconds it should work forever, or at least until some outside event happens (e.g. channel change, power glitch to the device, etc...). I ran it streaming once for 26 hours without a break. > > In /var/log/messages - nothing. Last message is from successful device > registration. Any ideas what could be the reason? It definately is not the > device itself, because I have had capture running more than 8 hours traight > without any problems using Windows and WinTV200, on the same hadrware. Any way > how to turn more debugging on? > > ervins There's a debug module option you can set. It is a bit mask; there are lots of bits you can set, generally in increasing order of noise in the log. Rather than repeat all the info here, the details can be found on this page: http://www.isely.net/pvrusb2/usage.html#Logging -Mike -- | Mike Isely | PGP fingerprint Spammers Die!! | | 03 54 43 4D 75 E5 CC 92 | isely @ pobox (dot) com | 71 16 01 E2 B5 F5 C1 E8 | | _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
