Dirk:
I don't use VDR here, so I can't really comment very well on VDR
specifics. However the author who wrote the plugin (Ralf Müller) I
believe is subscribed to this list so perhaps he can comment.
With that said, this might not be a VDR specific issue. Really there
should be no reason for streaming to spontaneously quit. I've seen and
dealt with problems in the past involving the driver, but none that
involved streaming quitting all by itself. Did something happen just
before the error? Like perhaps a channel change? I'm not saying that a
channel change is at fault; I'm just thinking through things that might
add other clues. Another possibility is that the device suffered a
power hit - it doesn't benefit from the filtering of your PC's power
supply (since it has its own power brick), so if for example a big A/C
compressor turned on and generated a power surge, it could potentially
crash the pvrusb2 device.
-Mike
On Thu, 14 Dec 2006, Dirk Vornheder wrote:
> Hi !
>
> vdr 1.4.4.2 crashes with latest pvrusb2 from 20061119 and kernel 2.6.19 after
>
> recording:
>
> Dec 7 11:43:40 pcbkup kernel: usb 1-5: new high speed USB device using
> ehci_hcd and address 6
> Dec 7 11:43:40 pcbkup kernel: usb 1-5: configuration #1 chosen from 1 choice
> Dec 7 11:43:41 pcbkup kernel: usbcore: registered new interface driver
> pvrusb2
> Dec 7 11:43:41 pcbkup
> kernel: /backup/privat/kernel/pvrusb2-mci-20061119/driver/pvrusb2-main.c:
> Hauppauge WinTV-PVR-USB2 MPE
> G2 Encoder/Tuner : 20061119 (from www.isely.net)
> Dec 7 11:43:41 pcbkup
> kernel: /backup/privat/kernel/pvrusb2-mci-20061119/driver/pvrusb2-main.c:
> Debug mask is 15 (0xf)
> Dec 7 11:43:42 pcbkup kernel: pvrusb2: Device microcontroller firmware
> (re)loaded; it should now reset and reconnect.
> Dec 7 11:43:42 pcbkup kernel: usb 1-5: USB disconnect, address 6
> Dec 7 11:43:44 pcbkup kernel: usb 1-5: new high speed USB device using
> ehci_hcd and address 7
> Dec 7 11:43:44 pcbkup kernel: usb 1-5: configuration #1 chosen from 1 choice
> Dec 7 11:43:44 pcbkup kernel: usb 1-5: reset high speed USB device using
> ehci_hcd and address 7
> Dec 7 11:43:45 pcbkup kernel: cx25840 4-0044: cx25843-23 found @ 0x88
> (pvrusb2_a)
> Dec 7 11:43:46 pcbkup kernel: cx25840 4-0044: loaded v4l-cx25840.fw firmware
> (16382 bytes)
> Dec 7 11:43:46 pcbkup kernel: tuner 4-0043: chip found @ 0x86 (pvrusb2_a)
> Dec 7 11:43:46 pcbkup kernel: tda9887 4-0043: tda988[5/6/7] found @ 0x43
> (tuner)
> Dec 7 11:43:46 pcbkup kernel: tuner 4-0061: chip found @ 0xc2 (pvrusb2_a)
> Dec 7 11:43:46 pcbkup kernel: wm8775 4-001b: chip found @ 0x36 (pvrusb2_a)
> Dec 7 11:43:46 pcbkup kernel: tveeprom 4-00a2: Hauppauge model 24019, rev
> C289, serial# 8562986
> Dec 7 11:43:46 pcbkup kernel: tveeprom 4-00a2: tuner model is TCL MFPE05 2
> (idx 89, type 38)
> Dec 7 11:43:46 pcbkup kernel: tveeprom 4-00a2: TV standards PAL(B/G) PAL(I)
> SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
> Dec 7 11:43:46 pcbkup kernel: tveeprom 4-00a2: audio processor is CX25843
> (idx 37)
> Dec 7 11:43:46 pcbkup kernel: tveeprom 4-00a2: decoder processor is CX25843
> (idx 30)
> Dec 7 11:43:46 pcbkup kernel: tveeprom 4-00a2: has radio, has IR remote
> Dec 7 11:43:46 pcbkup kernel: tuner 4-0061: type set to 38 (Philips
> PAL/SECAM
> multi (FM1216ME MK3))
> Dec 7 11:43:46 pcbkup kernel: cx25840 4-0044: Video signal: not
> present
> Dec 7 11:43:46 pcbkup kernel: cx25840 4-0044: Detected format:
> NTSC-M
> Dec 7 11:43:46 pcbkup kernel: cx25840 4-0044: Specified standard:
> PAL-BDGHI
> Dec 7 11:43:46 pcbkup kernel: cx25840 4-0044: Specified video input:
> Composite 7
> Dec 7 11:43:46 pcbkup kernel: cx25840 4-0044: Specified audioclock freq:
> 48000 Hz
> Dec 7 11:43:46 pcbkup kernel: cx25840 4-0044: Detected audio mode:
> forced mode
> Dec 7 11:43:46 pcbkup kernel: cx25840 4-0044: Detected audio standard: no
> detected audio standard
> Dec 7 11:43:46 pcbkup kernel: cx25840 4-0044: Audio muted: yes
> Dec 7 11:43:46 pcbkup kernel: cx25840 4-0044: Audio microcontroller:
> running
> Dec 7 11:43:46 pcbkup kernel: cx25840 4-0044: Configured audio standard:
> automatic detection
> Dec 7 11:43:46 pcbkup kernel: cx25840 4-0044: Configured audio system:
> automatic standard and mode detection
> Dec 7 11:43:46 pcbkup kernel: cx25840 4-0044: Specified audio input:
> Tuner (In8)
> Dec 7 11:43:46 pcbkup kernel: cx25840 4-0044: Preferred audio mode:
> stereo
> Dec 7 11:43:46 pcbkup kernel: cx25840 4-0044: Selected 65 MHz format:
> autodetect
> Dec 7 11:43:46 pcbkup kernel: cx25840 4-0044: Selected 45 MHz format:
> chroma
> Dec 7 11:43:46 pcbkup kernel: tda9887 4-0043: Data bytes: b=0x14 c=0x6e
> e=0x49
> Dec 7 11:43:46 pcbkup kernel: tuner 4-0061: Tuner mode: analog TV
> Dec 7 11:43:46 pcbkup kernel: tuner 4-0061: Frequency: 175.25 MHz
> Dec 7 11:43:46 pcbkup kernel: tuner 4-0061: Standard: 0x00000005
> Dec 7 11:43:46 pcbkup kernel: wm8775 4-001b: Input: 2
> Dec 7 11:43:46 pcbkup kernel: pvrusb2: Device initialization completed
> successfully.
> Dec 7 11:43:46 pcbkup kernel: pvrusb2: registered device video2 [mpeg]
>
> Dec 7 11:54:03 pcbkup vdr: [9025] initializing plugin: pvrusb2 (0.1.1): PVR
> USB2 Analog TV Driver Plugin
> Dec 7 11:54:03 pcbkup vdr: pvrusb2 plugin: INFO: Initialize
> Dec 7 11:54:03 pcbkup vdr: pvrusb2 plugin: DEBUG: Create Instance: sn-8562986
> Dec 7 11:54:03 pcbkup vdr: pvrusb2 plugin: DEBUG: Device value:
> Brightness=130(0,255)
> Dec 7 11:54:03 pcbkup vdr: pvrusb2 plugin: DEBUG: Device index: Brightness=15
> (0,30)
> Dec 7 11:54:03 pcbkup vdr: pvrusb2 plugin: DEBUG: Device value: Contrast=70
> (0,127)
> Dec 7 11:54:03 pcbkup vdr: pvrusb2 plugin: DEBUG: Device index: Contrast=16
> (0,30)
> Dec 7 11:54:03 pcbkup vdr: pvrusb2 plugin: DEBUG: Device value: Hue=0
> (-128,127)
> Dec 7 11:54:03 pcbkup vdr: pvrusb2 plugin: DEBUG: Device index: Hue=14(0,29)
> Dec 7 11:54:03 pcbkup vdr: pvrusb2 plugin: DEBUG: Device value: Saturation=65
> (0,127)
> Dec 7 11:54:03 pcbkup vdr: pvrusb2 plugin: DEBUG: Device index: Saturation=15
> (0,30)
> Dec 7 11:54:03 pcbkup vdr: pvrusb2 plugin: DEBUG: Found video device: 2
> Dec 7 11:54:03 pcbkup vdr: pvrusb2 plugin: DEBUG: Set video
> device: /dev/video2(2)
> Dec 7 11:54:03 pcbkup vdr: pvrusb2 plugin: DEBUG: SetValue: change
> ctl_audio_bitrate: 224kb/s=>224 kbps
> Dec 7 11:54:03 pcbkup vdr: pvrusb2 plugin: DEBUG: SetValue: change
> ctl_video_bitrate_mode: 3600000=>Variable Bitrate
> Dec 7 11:54:03 pcbkup vdr: pvrusb2 plugin: DEBUG: SetValue: change
> ctl_input: -1=>television
> Dec 7 11:54:03 pcbkup vdr: pvrusb2 plugin: DEBUG: SetValue: change
> ctl_video_standard: PAL-BG=>PAL-B/G
>
> Dec 7 12:16:46 pcbkup vdr: pvrusb2 plugin: DEBUG: OpenDvr
> Dec 7 12:16:46 pcbkup vdr: pvrusb2 plugin: DEBUG: Create reader.
> Dec 7 12:16:46 pcbkup vdr: pvrusb2 plugin: DEBUG: Start reader
> Dec 7 12:16:46 pcbkup vdr: pvrusb2 plugin: DEBUG: Open video
> device: /dev/video2.
> Dec 7 12:16:46 pcbkup vdr: pvrusb2 plugin: DEBUG: SetValue: change
> ctl_audio_bitrate: 224kb/s=>224 kbps
> Dec 7 12:16:46 pcbkup vdr: pvrusb2 plugin: DEBUG: SetValue: change
> ctl_video_bitrate_mode: 3600000=>Variable Bitrate
> Dec 7 12:16:46 pcbkup vdr: pvrusb2 plugin: DEBUG: SetValue: change
> ctl_input: -1=>television
> Dec 7 12:16:46 pcbkup vdr: pvrusb2 plugin: DEBUG: SetValue: change
> ctl_video_standard: PAL-BG=>PAL-B/G
> Dec 7 12:16:47 pcbkup vdr: pvrusb2 plugin: DEBUG: Dropped 51 TS packets to
> sync buffer(255868).
> Dec 7 12:16:50 pcbkup vdr: [9025] timer 2 (26 1203-1240 'Zapping
> International') set to event Don 07.12.2006 12:05-12:35 'Zapping
> International'
> Dec 7 12:17:02 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 113176
> limit:
> 13
> Dec 7 12:17:07 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 119004
> limit:
> 14
> Dec 7 12:17:12 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 119380
> limit:
> 14
> Dec 7 12:17:17 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 123704
> limit:
> 15
> Dec 7 12:17:27 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 115620
> limit:
> 14
> Dec 7 12:17:43 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 115056
> limit:
> 14
> Dec 7 12:17:48 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 108852
> limit:
> 13
> Dec 7 12:17:53 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 118252
> limit:
> 14
> Dec 7 12:17:58 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 125960
> limit:
> 15
> Dec 7 12:18:21 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 126336
> limit:
> 15
> Dec 7 12:18:26 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 122576
> limit:
> 14
> Dec 7 12:18:40 pcbkup sshd[9803]: Accepted publickey for root from
> 192.168.1.11 port 16034 ssh2
> Dec 7 12:18:49 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 125772
> limit:
> 15
> Dec 7 12:19:38 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 119004
> limit:
> 14
> Dec 7 12:19:48 pcbkup antivir[9857]: email notification is not available
> with
> this license
> Dec 7 12:19:53 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 104904
> limit:
> 12
> Dec 7 12:19:55 pcbkup antivir[9857]: AntiVir successfully updated itself
> Dec 7 12:20:04 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 110920
> limit:
> 13
> Dec 7 12:20:09 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 118064
> limit:
> 14
> Dec 7 12:20:19 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 120508
> limit:
> 14
> Dec 7 12:20:40 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 111672
> limit:
> 13
> Dec 7 12:20:45 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 114680
> limit:
> 13
> Dec 7 12:20:55 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 126900
> limit:
> 15
> Dec 7 12:21:00 pcbkup vdr: [9025] connect from 127.0.0.1, port 29499 -
> accepted
> Dec 7 12:21:00 pcbkup vdr: [9025] closing SVDRP connection
> Dec 7 12:21:05 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 122764
> limit:
> 14
> Dec 7 12:21:15 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 126336
> limit:
> 15
> Dec 7 12:21:25 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 113364
> limit:
> 13
> Dec 7 12:21:51 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 106972
> limit:
> 13
> Dec 7 12:22:06 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 123516
> limit:
> 15
> Dec 7 12:22:11 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 120320
> limit:
> 14
> Dec 7 12:22:16 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 109980
> limit:
> 13
> Dec 7 12:22:22 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 119192
> limit:
> 14
> Dec 7 12:22:26 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 110168
> limit:
> 13
> Dec 7 12:22:42 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 123704
> limit:
> 15
> Dec 7 12:22:47 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 123140
> limit:
> 15
> Dec 7 12:22:57 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 109228
> limit:
> 13
> Dec 7 12:23:28 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 99452 limit:
> 12
> Dec 7 12:23:38 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 127276
> limit:
> 15
> Dec 7 12:23:43 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 112612
> limit:
> 13
> Dec 7 12:23:48 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 120132
> limit:
> 14
> Dec 7 12:24:00 pcbkup vdr: [9036] EPGSearch: timer conflict check started
> Dec 7 12:24:00 pcbkup vdr: [9036] EPGSearch: timer conflict check finished
> Dec 7 12:24:09 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 113364
> limit:
> 13
> Dec 7 12:24:14 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 126524
> limit:
> 15
> Dec 7 12:24:24 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 104152
> limit:
> 12
> Dec 7 12:24:35 pcbkup syslog-ng[4016]: STATS: dropped 0
> Dec 7 12:24:39 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 114868
> limit:
> 14
> Dec 7 12:24:43 pcbkup zmd: ShutdownManager (WARN): Preparing to sleep...
> Dec 7 12:24:43 pcbkup zmd: ShutdownManager (WARN): Going to sleep, waking up
> at 12/08/2006 11:14:43
> Dec 7 12:24:50 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 109040
> limit:
> 13
> Dec 7 12:24:55 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 105656
> limit:
> 12
> Dec 7 12:25:00 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 109604
> limit:
> 13
> Dec 7 12:25:05 pcbkup smartd[4407]: Device: /dev/hda, SMART Usage Attribute:
> 194 Temperature_Celsius changed from 91 to 89
> Dec 7 12:25:05 pcbkup smartd[4407]: Device: /dev/hda, SMART Usage Attribute:
> 195 Hardware_ECC_Recovered changed from 96 to 51
> Dec 7 12:25:05 pcbkup smartd[4407]: Device: /dev/hdb, SMART Usage Attribute:
> 194 Temperature_Celsius changed from 88 to 83
> Dec 7 12:25:06 pcbkup smartd[4407]: Device: /dev/hdc, SMART Usage Attribute:
> 194 Temperature_Celsius changed from 171 to 144
> Dec 7 12:25:10 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 103400
> limit:
> 12
> Dec 7 12:25:16 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 106408
> limit:
> 12
> Dec 7 12:25:21 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 119004
> limit:
> 14
> Dec 7 12:25:26 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 122388
> limit:
> 14
> Dec 7 12:25:41 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 114680
> limit:
> 13
> Dec 7 12:25:57 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 111484
> limit:
> 13
> Dec 7 12:26:07 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 111672
> limit:
> 13
> Dec 7 12:26:17 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 120696
> limit:
> 14
> Dec 7 12:26:22 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 113176
> limit:
> 13
> Dec 7 12:26:27 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 122200
> limit:
> 14
> Dec 7 12:26:38 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 105092
> limit:
> 12
> Dec 7 12:26:53 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 117876
> limit:
> 14
> Dec 7 12:27:08 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 126148
> limit:
> 15
> Dec 7 12:27:44 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 118440
> limit:
> 14
> Dec 7 12:28:00 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 110356
> limit:
> 13
> Dec 7 12:28:05 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 124080
> limit:
> 15
> Dec 7 12:28:15 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 118252
> limit:
> 14
> Dec 7 12:28:25 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 123328
> limit:
> 15
> Dec 7 12:28:30 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 109416
> limit:
> 13
> Dec 7 12:28:40 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 121260
> limit:
> 14
> Dec 7 12:28:45 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 126148
> limit:
> 15
> Dec 7 12:28:50 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 120696
> limit:
> 14
> Dec 7 12:29:10 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 117500
> limit:
> 14
> Dec 7 12:29:20 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 112424
> limit:
> 13
> Dec 7 12:29:25 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 125208
> limit:
> 15
> Dec 7 12:29:35 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 107724
> limit:
> 13
> Dec 7 12:29:40 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 117124
> limit:
> 14
> Dec 7 12:29:46 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 117500
> limit:
> 14
> Dec 7 12:29:51 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 107724
> limit:
> 13
> Dec 7 12:29:56 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 104528
> limit:
> 12
> Dec 7 12:30:00 pcbkup vdr: [9797] recording thread ended (pid=9025, tid=9797)
> Dec 7 12:30:00 pcbkup vdr: [9796] file writer thread ended (pid=9025,
> tid=9796)
> Dec 7 12:30:00 pcbkup vdr: [9025] buffer stats: 300612 (5%) used
> Dec 7 12:30:00 pcbkup vdr: [9025] timer 1 (1 1158-1230 'Punkt 12') stop
> Dec 7 12:30:00 pcbkup vdr: [9025]
> executing '/usr/bin/noad --overlap --ac3 --jumplogo
> --statisticfile=/video/noadstat
> after "/video0/Punkt_12/2006-12-07.11.58.99.99.rec"'
> Dec 7 12:30:00 pcbkup noad[18354]: noad arg[0]: /usr/bin/noad
> Dec 7 12:30:00 pcbkup noad[18354]: noad arg[1]: --overlap
> Dec 7 12:30:00 pcbkup noad[18354]: noad arg[2]: --ac3
> Dec 7 12:30:00 pcbkup noad[18354]: noad arg[3]: --jumplogo
> Dec 7 12:30:00 pcbkup noad[18354]: noad
> arg[4]: --statisticfile=/video/noadstat
> Dec 7 12:30:00 pcbkup noad[18354]: noad arg[5]: after
> Dec 7 12:30:00 pcbkup noad[18354]: noad
> arg[6]: /video0/Punkt_12/2006-12-07.11.58.99.99.rec
> Dec 7 12:30:00 pcbkup noad[18354]: noad args done
> Dec 7 12:30:00 pcbkup noad[18354]: noad forked to pid 18358
> Dec 7 12:30:00 pcbkup noad[18358]: Thursday,07.12.2006 12:30:00 start
> noad-0.6.0 for /video0/Punkt_12/2006-12-07.11.58.99.99.rec
> Dec 7 12:30:14 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 122200
> limit:
> 14
> Dec 7 12:30:19 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 126148
> limit:
> 15
> Dec 7 12:30:29 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 121072
> limit:
> 14
> Dec 7 12:30:39 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 108476
> limit:
> 13
> Dec 7 12:30:50 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 114304
> limit:
> 13
> Dec 7 12:31:00 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 117312
> limit:
> 14
> Dec 7 12:31:10 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 109416
> limit:
> 13
> Dec 7 12:31:13 pcbkup vdr: [9025] deleting timer 1 (1 1158-1230 'Punkt 12')
> Dec 7 12:31:15 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 119756
> limit:
> 14
> Dec 7 12:31:25 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 119756
> limit:
> 14
> Dec 7 12:31:30 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 119004
> limit:
> 14
> Dec 7 12:31:35 pcbkup vdr: pvrusb2 plugin: DEBUG: TS available: 126900
> limit:
> 15
> Dec 7 12:31:52 pcbkup vdr: [9800] cAudioRepacker(0xC0): skipped 24 bytes
> while syncing on next audio frame
> Dec 7 12:31:52 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer empty.
> Waiting ... (0, 0)
> Dec 7 12:31:55 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer still empty
> Dec 7 12:31:55 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer empty.
> Waiting ... (1, 0)
> Dec 7 12:31:57 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer still empty
> Dec 7 12:31:57 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer empty.
> Waiting ... (2, 0)
> Dec 7 12:32:00 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer still empty
> Dec 7 12:32:00 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer empty.
> Waiting ... (3, 0)
> Dec 7 12:32:02 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer still empty
> Dec 7 12:32:02 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer empty.
> Waiting ... (4, 0)
> Dec 7 12:32:05 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer still empty
> Dec 7 12:32:05 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer empty.
> Waiting ... (5, 0)
> Dec 7 12:32:07 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer still empty
> Dec 7 12:32:07 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer empty.
> Waiting ... (6, 0)
> Dec 7 12:32:10 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer still empty
> Dec 7 12:32:10 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer empty.
> Waiting ... (7, 0)
> Dec 7 12:32:12 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer still empty
> Dec 7 12:32:12 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer empty.
> Waiting ... (8, 0)
> Dec 7 12:32:15 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer still empty
> Dec 7 12:32:15 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer empty.
> Waiting ... (9, 0)
> Dec 7 12:32:17 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer still empty
> Dec 7 12:32:18 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer empty.
> Waiting ... (10, 0)
> Dec 7 12:32:20 pcbkup vdr: pvrusb2 plugin: DEBUG: TS buffer still empty
> Dec 7 12:32:20 pcbkup vdr: pvrusb2 plugin: ERROR: Unable to get TS packet.
> Giving up after 11 retries.
> Dec 7 12:32:20 pcbkup vdr: pvrusb2 plugin: DEBUG: CloseDvr
> Dec 7 12:32:20 pcbkup vdr: [9801] receiver on device 5 thread ended
> (pid=9025, tid=9801)
> Dec 7 12:32:23 pcbkup vdr: [9799] ERROR: video data stream broken
> Dec 7 12:32:23 pcbkup vdr: [9799] initiating emergency exit
> Dec 7 12:32:23 pcbkup vdr: [9025] emergency exit requested - shutting down
> Dec 7 12:32:23 pcbkup vdr: [9025] stopping plugin: vompserver
> Dec 7 12:32:23 pcbkup vdr: [9025] stopping plugin: mp3
> Dec 7 12:32:23 pcbkup vdr: [9025] stopping plugin: mplayer
> Dec 7 12:32:23 pcbkup vdr: [9025] stopping plugin: epgsearch
> Dec 7 12:32:23 pcbkup vdr: [9025] stopping plugin: pvrusb2
> Dec 7 12:32:23 pcbkup vdr: pvrusb2 plugin: INFO: Stop
>
> Dirk
>
>
>
>
>
> ___________________________________________________________
> Der frühe Vogel fängt den Wurm. Hier gelangen Sie zum neuen Yahoo! Mail:
> http://mail.yahoo.de
>
--
| Mike Isely | PGP fingerprint
Spammers Die!! | | 03 54 43 4D 75 E5 CC 92
| isely @ pobox (dot) com | 71 16 01 E2 B5 F5 C1 E8
| |_______________________________________________
pvrusb2 mailing list
[email protected]
http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
