On Tue, 16 Jan 2007, Ryan Schmitz wrote: > Hi everyone, > > I've been having a very hard time getting my Remote to work with the > pvrusb2. I had extensive conversations with Roger Allen(thanks Roger) and > we've concluded this could be a possible hardware change from Hauppauge.
I don't think this is likely. Hauppauge has been unofficially talking to me about stuff like this. But read on... > > Here is whats been going on: > > The problem is that lirc_i2c never finds the IR chip on my 24xxx model of > the WinTV-PVR-USB2. > > *The model of WinTV-PVR-USB2 is 24012 LF Rev E1A3 NTSC/NTSC-J (this was not > listed in your poll) > > *The remote works under Windows XP > > *I upgraded to the latest FC6 kernel and packages. > > *The WinTV-PVR-USB2 was cold booted. > > *I compared my configuration with Roger Allen's FC6 setup which is working > fine > (except that I have the 24xxx and he has the 29xxx). > > A complete listing of my dmesg can be found here: > http://rrschmitz.homelinux.com:8000/dmesg-E1A3.log I was unable to access this page. > > Please let me know if you have any ideas Which driver version are you using and where did it come from? I ask because IR support for 24xxx devices didn't work until fairly recently. The released in-kernel driver (2.6.18 and 2.6.19) don't have this support because the needed changes didn't get merged until the 2.6.20 merge window. The current v4l-dvb repository has the changes, and the last few standalone pvrusb2 drivers (see the change history) has support for 24xxx IR. -Mike -- | Mike Isely | PGP fingerprint Spammers Die!! | | 03 54 43 4D 75 E5 CC 92 | isely @ pobox (dot) com | 71 16 01 E2 B5 F5 C1 E8 | | _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
