I have just installed kernel version 2.6.20 with the latest snapshot on my Ubuntu laptop, but why do I get the I2C warning (the device seems to be working) and I still have the problem that the msp3400 chip reset sometime fails - not in this log.
[ 2548.580000] /home/../driver/pvrusb2-main.c: Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner : 20070127 (from www.isely.net) [ 2548.580000] /home/../driver/pvrusb2-main.c: Debug mask is 15 (0xf) [ 2548.720000] pvrusb2: Device microcontroller firmware (re)loaded; it should now reset and reconnect. [ 2548.892000] usb 2-1: USB disconnect, address 3 [ 2550.644000] usb 2-1: new high speed USB device using ehci_hcd and address 4 [ 2550.776000] usb 2-1: configuration #1 chosen from 1 choice [ 2550.888000] usb 2-1: reset high speed USB device using ehci_hcd and address 4 [ 2551.420000] **WARNING** I2C adapter driver [pvrusb2_a] forgot to specify physical device; fix it! [ 2551.528000] msp3400 0-0040: MSP3415G-B8 found @ 0x80 (pvrusb2_a) [ 2551.528000] msp3400 0-0040: MSP3415G-B8 supports nicam and radio, mode is autodetect and autoselect [ 2551.592000] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (pvrusb2_a) [ 2551.796000] tuner 0-0061: chip found @ 0xc2 (pvrusb2_a) [ 2551.828000] tveeprom 0-0050: Hauppauge model 29034, rev C347, serial# 6800105 [ 2551.828000] tveeprom 0-0050: tuner model is LG TP18PSB01D (idx 47, type 28) [ 2551.828000] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04) [ 2551.828000] tveeprom 0-0050: audio processor is MSP3415 (idx 6) [ 2551.828000] tveeprom 0-0050: decoder processor is SAA7115 (idx 19) [ 2551.828000] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter [ 2551.856000] tuner 0-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D)) [ 2551.988000] msp3400 0-0040: MSP3415G-B8 rev1 = 0x0207 rev2 = 0x0f48 [ 2551.988000] msp3400 0-0040: Audio: volume 62000 [ 2551.988000] msp3400 0-0040: Audio: balance 0 bass 0 treble 0 loudness off [ 2551.988000] msp3400 0-0040: Standard: autodetect start (mono) [ 2551.988000] msp3400 0-0040: Audmode: 0x0001 [ 2551.988000] msp3400 0-0040: Routing: 0x00000000 (input) 0x00000044 (output) [ 2551.988000] msp3400 0-0040: ACB: 0x0c00 [ 2551.988000] saa7115 0-0021: Audio frequency: 48000 Hz [ 2551.988000] saa7115 0-0021: Input: Composite 4 [ 2551.988000] saa7115 0-0021: Video signal: bad [ 2551.988000] saa7115 0-0021: Frequency: 50 Hz [ 2551.988000] saa7115 0-0021: Detected format: BW/No color [ 2551.988000] saa7115 0-0021: Width, Height: 720, 576 [ 2551.988000] tuner 0-0061: Tuner mode: analog TV [ 2551.988000] tuner 0-0061: Frequency: 175.25 MHz [ 2551.988000] tuner 0-0061: Standard: 0x00000005 [ 2551.988000] pvrusb2: Device initialization completed successfully. [ 2551.988000] pvrusb2: registered device video0 [mpeg] [ 2551.988000] pvrusb2: registered device radio0 [mpeg] Thanks Bent _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
