Mike Isely wrote: > On Tue, 4 Sep 2007, Eric A. Bonney wrote: > > >> I am running kernal 2.6.18-5, debian etch. I have installed the firmware >> and followed the items on the website but I am still not able to get my >> device working. I know it is being seen by the system as I see it in the >> logs. I was wondering if there is anything I need to do in order to get >> this working on my system? Do I need to recompile the kernel to get the >> driver support or is it there already? >> >> > > Eric: > > I need more information to diagnose this. A copy of the part of your > dmesg output where the device is being seen would be very helpful. We > need to determine at what stage things are going wrong for you. > > -Mike > > Mike:
Ok so here is what is the information that I think you need from my dmesg output. Please let me know if you need something else. Linux video capture interface: v2.00 usbcore: registered new driver pvrusb2 drivers/media/video/pvrusb2/pvrusb2-main.c: Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner : V4L in-tree version drivers/media/video/pvrusb2/pvrusb2-main.c: Debug mask is 15 (0xf) pvrusb2: Device microcontroller firmware (re)loaded; it should now reset and reconnect. usb 1-1: USB disconnect, address 8 usb 1-1: new full speed USB device using ohci_hcd and address 9 usb 1-1: configuration #1 chosen from 1 choice usb 1-1: reset full speed USB device using ohci_hcd and address 9 cx25840 0-0044: cx25843-23 found @ 0x88 (pvrusb2_a) cx25840 0-0044: loaded v4l-cx25840.fw firmware (12559 bytes) tuner 0-0043: chip found @ 0x86 (pvrusb2_a) tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 0-0061: chip found @ 0xc2 (pvrusb2_a) wm8775 0-001b: chip found @ 0x36 (pvrusb2_a) tveeprom 0-00a2: Hauppauge model 24012, rev E1A3, serial# 10130578 tveeprom 0-00a2: tuner model is TCL MFNM05-4 (idx 103, type 43) tveeprom 0-00a2: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-00a2: audio processor is CX25843 (idx 37) tveeprom 0-00a2: decoder processor is CX25843 (idx 30) tveeprom 0-00a2: has radio, has IR remote tuner 0-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) cx25840 0-0044: Video signal: not present cx25840 0-0044: Detected format: NTSC-M cx25840 0-0044: Specified standard: PAL-M cx25840 0-0044: Specified video input: Composite 7 cx25840 0-0044: Specified audioclock freq: 44100 Hz cx25840 0-0044: Detected audio mode: forced mode cx25840 0-0044: Detected audio standard: no detected audio standard cx25840 0-0044: Audio muted: yes cx25840 0-0044: Audio microcontroller: running cx25840 0-0044: Configured audio standard: automatic detection cx25840 0-0044: Configured audio system: BTSC cx25840 0-0044: Specified audio input: Tuner (In8) cx25840 0-0044: Preferred audio mode: stereo tda9887 0-0043: Data bytes: b=0x14 c=0x30 e=0x44 tuner 0-0061: Tuner mode: analog TV tuner 0-0061: Frequency: 175.25 MHz tuner 0-0061: Standard: 0x00000100 wm8775 0-001b: Input: 2 pvrusb2: Device initialization completed successfully. pvrusb2: registered device video0 [mpeg] Thanks, -Eric _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
