i've traditionally been a pc users but lately i've been playing around with Ubuntu. i am in no way an expert but can certainly navigate around and get a few things setup. i have the happaugue pvr usb2 capture card and am trying to set it up. i've gone through your installiation instructions but still no luck. i've got the driver installed and still not able to see the cable streams. below is a list of pvr related modules that are loaded. i'm not sure if that shows anything. i've also tried to send the stream to mplayer but nothing. output for both are below. i was wondering if you would see something that i have not been able to:
dhimi...@linksys-ubuntu:~$ lsmod | grep pvrusb2 pvrusb2 148032 0 cx2341x 21124 2 ivtv,pvrusb2 v4l2_common 19840 8 cx8800,ivtv,bttv,wm8775,tuner,cx25840,pvrusb2,cx2341x videodev 41344 6 cx8800,cx88xx,ivtv,bttv,tuner,pvrusb2 v4l1_compat 22404 2 pvrusb2,videodev tveeprom 20228 4 cx88xx,ivtv,bttv,pvrusb2 i2c_core 31892 15 cx88xx,ivtv,bttv,i2c_algo_bit,lirc_i2c,tuner_simple,tda9887,tda8290,wm8775,tuner,cx25840,pvrusb2,v4l2_common,tveeprom,nvidia usbcore 148848 5 pvrusb2,btusb,ehci_hcd,uhci_hcd dhimi...@linksys-ubuntu:~$ mplayer /dev/video0 mplayer: could not connect to socket mplayer: Connection refused Failed to open LIRC support. You will not be able to use your remote control. Playing /dev/video0. Cannot seek backward in linear streams! Seek failed Cannot seek backward in linear streams! Seek failed Cannot seek backward in linear streams! Seek failed .................................. [the above line is repeated multiple times] MPEG-PS file format detected. VIDEO: MPEG2 720x480 (aspect 2) 29.970 fps 8000.0 kbps (1000.0 kbyte/s) xscreensaver_disable: Could not find XScreenSaver window. GNOME screensaver disabled ========================================================================== Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough VDec: vo config request - 720 x 480 (preferred colorspace: Mpeg PES) Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] The selected video_out device is incompatible with this codec. Try appending the scale filter to your filter list, e.g. -vf spp,scale instead of -vf spp. VDecoder init failed :( Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b Selected video codec: [mpeg12] vfm: libmpeg2 (MPEG-1 or 2 (libmpeg2)) ========================================================================== ========================================================================== Forced audio codec: mad Opening audio decoder: [libmad] libmad mpeg audio decoder AUDIO: 48000 Hz, 2 ch, s16le, 224.0 kbit/14.58% (ratio: 28000->192000) Selected audio codec: [mad] afm: libmad (libMAD MPEG layer 1-2-3) ========================================================================== AO: [pulse] 48000Hz 2ch s16le (2 bytes per sample) Starting playback... VDec: vo config request - 720 x 480 (preferred colorspace: Planar YV12) VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is 1.33:1 - prescaling to correct movie aspect. VO: [xv] 720x480 => 720x540 Planar YV12 GNOME screensaver enabled.006 ct: -0.318 105/105 35% 1% 14.4% 7 0 Exiting... (Quit) Thanks, dhimiter _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
