On Sun, 2009-08-02 at 19:01 -0400, Julio Arruda wrote: > I'm using this 'combo', one old "WinTV PVR USB2 Model Category 29xxx" > and a newer "WinTV HVR-1950 Model Category 751xx", with latest code > pvrusb2-mci-20090626. > > What I would like to know is how to force video0 and video1 to map to > specific devices (I assume will need to be based in device id in the > USB), but I'm not quite familiar with Ubuntu 8.10 hotplug/udev.
Just a quick note here. Already gave Mike my feedback on this. I have a pvrusb2 & hvr-1950 as well. It seems, the pvrusb2 always gets /dev/video0 here when both devices are connected. Since it takes a little while for the firmware to load for the hvr-1950 as well as DVB to initialize, the hvr1950 gets /dev/video1. My hvr-1950 model version is "75111 LF, Rev. C3E9" which uses the s5h1411 module for it's s5h1411. The earlier hvr-1950's don't use the s5h1411 chip from what I hear. So this could also affect load times, as well as other things. <shrugs> -- Roger http://rogerx.freeshell.org _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
