On Fri, 5 Feb 2010, Leonardo Muffatti wrote: > Recently Hauppauge change HVR-1900 hardware (at dicember 2009) > old one: Hauppauge model 73219, rev D1E9 > new one: Hauppauge model 73219, rev D1F5 > Inside new model we get TDA18271HN/C2 managed by driver tda18271.ko of > kernel 2.6.32.2 (old model has TDA18271HN/C1) > DVB tuner doesn't work any more. > Now I force tda18271.ko module to discover a TDA18271HN/C1 on new hardware. > and I get a working DVB tuner. > > Regards, Leonardo
Leonardo: I'm not the expert on DVB tuners innards (I just maintain a bridge driver, pvrusb2, which can use them as supplied by v4l-dvb). And I don't have an HVR-1900 with which I can test, being that I'm in the USA. However I asked the person (Mike Krufky) who knows about these, and he's a little puzzled by exactly what software revisions you are running. Apparently this setup has been supported in v4l-dvb for over a year. He recommends building what is in v4l-dvb tip (Mercurial repository): http://linuxtv.org/hg/v4l-dvb Alternatively the needed changes are definitely here: http://kernellabs.com/hg/~mkrufky/tda8295/ You mentioned a 2.6.32.2 kernel in your message, and I would presume that if the needed changes have been in v4l-dvb for at least a year, then they should also be in that kernel version anyway. But try building one of those v4l-dvb repositories against your kernel and see if that makes a difference. -Mike -- Mike Isely isely @ isely (dot) net PGP: 03 54 43 4D 75 E5 CC 92 71 16 01 E2 B5 F5 C1 E8 _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
