Using Kernel 2.6.33.2 mainline kernel on AMD 64 dual CPU chip (from /proc/cpuinfo AMD Athlon(tm) 64 X2 Dual Core Processor 4200+). It is tainted with nvidia 195.36.15.
After a long period of time (at least in internet time) I have decided to resume use of my HVR-1950. This HVR-1950 is the older one with 8K firmware (which is in /lib/firmware). -rwxr-xr-x. 1 root root 8192 Oct 6 2006 /lib/firmware/v4l-pvrusb2-24xxx-01.fw -rwxr-xr-x. 1 root root 8192 Jul 1 2006 /lib/firmware/v4l-pvrusb2-29xxx-01.fw -rwxr-xr-x. 1 root root 8192 Jun 17 2009 /lib/firmware/v4l-pvrusb2-73xxx-01.fw I have the pvrusb2 blacklisted to allow the machine to boot completely before I load the device. I do modprobe pvrusb2 with lots of bits of debug: 0xffff. I don't get the normal first firmware load: dmesg shows: pvrusb2: pvr_init usbcore: registered new interface driver pvrusb2 pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner pvrusb2: Debug mask is 65535 (0xffff) pvrusb2: pvr_init complete pvrusb2: pvr2_context thread start that's it.... inside ps aux there is a: root 2271 0.0 0.0 0 0 ? S 12:56 0:00 [pvrusb2-context] Nothing happens and then I rmmod the pvrusb2 and get: pvrusb2: pvr_exit usbcore: deregistering interface driver pvrusb2 pvrusb2: pvr2_context thread cleaned up pvrusb2: pvr2_context thread end pvrusb2: pvr_exit complete I looked back at the normal loads from the mail list and I am not getting the first firmware load request. lsusb does not show this device. Any comments regarding where to look would be appreciated. I have the kernel compiled and will put the .config out if that is important. All the video devices (and sub components) are compiled as modules. Also, I can turn on kernel debugging if you indicate where and how I do so. Thanks in advance. This HVR-1950 is the older one with 8K firmware (which is in /lib/firmware). _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
