I've solved parts of my problems mentioned in the previous email. 1. Location of the cylinder.
The rectangle is 43 in length and 16 in width; The radius of cylinder is 0.5; its location was (0,0,0), while the lower left endpoint of the rectangle was (-8,-8,0) 2. Unit of measurement I treat the rectangle as 43 meters in length and the "Uin" as x m/s. 在 2018年04月06日 14:31, Lin Ruohshoei 写道: > Dear all, > > I've tried to run the example "inc_cylinder_2d" with PyFR v.1.7.6. > > Now I would like to change the Reynolds number of the example and > observe the distribution of the pressure factor in the surface of the > cylinder. > > Questions list below: > > Mesh file: > > 1. Unit of measurement used in the cylinder. I am wondering whether > it uses meter. > > 2. The geo file. It's hard to read dimensions from the mesh file > about the radius of the cylinder or the location of the cylinder in > direct way. > > Can someone provide me with the geo file about the example? > > > > Configuration File: > > 1. In the "[constant]" section, I am wondering what the parameter > "Pc" means because it is not appeared in the user guide about [constant]. > > 2. What is the unit used in the "Uin" or "Vin", is it meters per > second (m/s)? > > > > Regards, > > Lin > > > > > > > > > > > -- You received this message because you are subscribed to the Google Groups "PyFR Mailing List" group. To unsubscribe from this group and stop receiving emails from it, send an email to pyfrmailinglist+unsubscr...@googlegroups.com. To post to this group, send an email to pyfrmailinglist@googlegroups.com. Visit this group at https://groups.google.com/group/pyfrmailinglist. For more options, visit https://groups.google.com/d/optout.
