Hi Lina,
In most cases, you can set it back to default by setting it to -1.
To know what the default value is, you can use 'get setting_name', before
you start fiddling with the setting.
Hope it helps,
Tsjerk
On Sep 15, 2011 4:12 AM, "lina" <lina.lastn...@gmail.com> wrote:
Hi,
when I tried to set something,
let's say
set stick_radius, 0.5
found not ideal, and I wanna be back to default setting,
how do I check the default settings very quickly.
above just an example, not real case,
Thanks for any suggestions,
--
Best Regards,
lina
------------------------------------------------------------------------------
Doing More with Less: The Next Generation Virtual Desktop
What are the key obstacles that have prevented many mid-market businesses
from deploying virtual desktops? How do next-generation virtual desktops
provide companies an easier-to-deploy, easier-to-manage and more affordable
virtual desktop model.http://www.accelacomm.com/jaw/sfnl/114/51426474/
_______________________________________________
PyMOL-users mailing list (PyMOL-users@lists.sourceforge.net)
Info Page: https://lists.sourceforge.net/lists/listinfo/pymol-users
Archives: http://www.mail-archive.com/pymol-users@lists.sourceforge.net
------------------------------------------------------------------------------
Doing More with Less: The Next Generation Virtual Desktop
What are the key obstacles that have prevented many mid-market businesses
from deploying virtual desktops? How do next-generation virtual desktops
provide companies an easier-to-deploy, easier-to-manage and more affordable
virtual desktop model.http://www.accelacomm.com/jaw/sfnl/114/51426474/
_______________________________________________
PyMOL-users mailing list (PyMOL-users@lists.sourceforge.net)
Info Page: https://lists.sourceforge.net/lists/listinfo/pymol-users
Archives: http://www.mail-archive.com/pymol-users@lists.sourceforge.net