Message: 2
Date: Mon, 5 Mar 2007 11:45:38 -0500
From: "Andy Anderson" <[EMAIL PROTECTED]>
Subject: RE: [PyKDE] Back to the long delay caused when
callingQDialog.getOpenFileNames()
To: <[email protected]>
Message-ID:
This is probably a generic Qt problem, not because of PyQt.
It's probably more of an issue with the ming32 compilation of QT 4.2.2- eh?
If you can, create an equivalent C++ Qt test. If you see the same delay,
then look at the Qt mailing lists, support, etc.
I doubt I could do that to an degree of success.
I don't know C++ and would likely add more problems to this trying to
get there, than there
already are. If there is anything else I can to move this along, let me know.
You can also test to see if the delay changes with the number of files
shown in the dialog. If the delay increases with the number of files,
This I can do- will report back results tonight
FWIW, I remember some versions of Qt3 had performance problems in the
file dialogs due to networked drives and/or networked user accounts.
It sounds reasonable.
However, I have tried this where I work (from my laptop), which has a
lot of networked drives, and at home (from the same laptop), where I
have a wireless network, but do not have any drives mapped.
I need to reinstall Py2.5, and the same version of QT, sip, PyQt on my
desktop machine at home and try the same thing.
_______________________________________________
PyKDE mailing list [email protected]
http://mats.imk.fraunhofer.de/mailman/listinfo/pykde
