Congratulations. May there be many more :) Chuck
On Tue, Dec 18, 2018 at 9:57 AM Tyler Reddy <tyler.je.re...@gmail.com> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > Hi all, > > On behalf of the SciPy development team I'm pleased to announce > the release of SciPy 1.2.0. This is an LTS release and the > last to support Python 2.7. > > Sources and binary wheels can be found at: > https://pypi.org/project/scipy/ > and at: > https://github.com/scipy/scipy/releases/tag/v1.2.0 > > One of a few ways to install this release with pip: > > pip install scipy==1.2.0 > > ========================== > SciPy 1.2.0 Release Notes > ========================== > > SciPy 1.2.0 is the culmination of 6 months of hard work. It contains > many new features, numerous bug-fixes, improved test coverage and better > documentation. There have been a number of deprecations and API changes > in this release, which are documented below. All users are encouraged to > upgrade to this release, as there are a large number of bug-fixes and > optimizations. Before upgrading, we recommend that users check that > their own code does not use deprecated SciPy functionality (to do so, > run your code with ``python -Wd`` and check for ``DeprecationWarning`` s). > Our development attention will now shift to bug-fix releases on the > 1.2.x branch, and on adding new features on the master branch. > > This release requires Python 2.7 or 3.4+ and NumPy 1.8.2 or greater. > > Note: This will be the last SciPy release to support Python 2.7. > Consequently, the 1.2.x series will be a long term support (LTS) > release; we will backport bug fixes until 1 Jan 2020. > > For running on PyPy, PyPy3 6.0+ and NumPy 1.15.0 are required. > > Highlights of this release > --------------------------- > > - 1-D root finding improvements with a new solver, ``toms748``, and a new > unified interface, ``root_scalar`` > - New ``dual_annealing`` optimization method that combines stochastic and > local deterministic searching > - A new optimization algorithm, ``shgo`` (simplicial homology > global optimization) for derivative free optimization problems > - A new category of quaternion-based transformations are available in > `scipy.spatial.transform` > > New features > ============ > > `scipy.ndimage` improvements > --------------------------------- > > Proper spline coefficient calculations have been added for the ``mirror``, > ``wrap``, and ``reflect`` modes of `scipy.ndimage.rotate` > > `scipy.fftpack` improvements > --------------------------------- > > DCT-IV, DST-IV, DCT-I, and DST-I orthonormalization are now supported in > `scipy.fftpack`. > > `scipy.interpolate` improvements > --------------------------------- > > `scipy.interpolate.pade` now accepts a new argument for the order of the > numerator > > `scipy.cluster` improvements > ----------------------------- > > `scipy.cluster.vq.kmeans2` gained a new initialization method, kmeans++. > > `scipy.special` improvements > ----------------------------- > > The function ``softmax`` was added to `scipy.special`. > > `scipy.optimize` improvements > ------------------------------ > > The one-dimensional nonlinear solvers have been given a unified interface > `scipy.optimize.root_scalar`, similar to the `scipy.optimize.root` > interface > for multi-dimensional solvers. ``scipy.optimize.root_scalar(f, bracket=[a > ,b], > method="brenth")`` is equivalent to ``scipy.optimize.brenth(f, a ,b)``. > If no > ``method`` is specified, an appropriate one will be selected based upon the > bracket and the number of derivatives available. > > The so-called Algorithm 748 of Alefeld, Potra and Shi for root-finding > within > an enclosing interval has been added as `scipy.optimize.toms748`. This > provides > guaranteed convergence to a root with convergence rate per function > evaluation > of approximately 1.65 (for sufficiently well-behaved functions.) > > ``differential_evolution`` now has the ``updating`` and ``workers`` > keywords. > The first chooses between continuous updating of the best solution vector > (the > default), or once per generation. Continuous updating can lead to faster > convergence. The ``workers`` keyword accepts an ``int`` or map-like > callable, > and parallelises the solver (having the side effect of updating once per > generation). Supplying an ``int`` evaluates the trial solutions in N > parallel > parts. Supplying a map-like callable allows other parallelisation > approaches > (such as ``mpi4py``, or ``joblib``) to be used. > > ``dual_annealing`` (and ``shgo`` below) is a powerful new general purpose > global optizimation (GO) algorithm. ``dual_annealing`` uses two annealing > processes to accelerate the convergence towards the global minimum of an > objective mathematical function. The first annealing process controls the > stochastic Markov chain searching and the second annealing process > controls the > deterministic minimization. So, dual annealing is a hybrid method that > takes > advantage of stochastic and local deterministic searching in an efficient > way. > > ``shgo`` (simplicial homology global optimization) is a similar algorithm > appropriate for solving black box and derivative free optimization (DFO) > problems. The algorithm generally converges to the global solution in > finite > time. The convergence holds for non-linear inequality and > equality constraints. In addition to returning a global minimum, the > algorithm also returns any other global and local minima found after every > iteration. This makes it useful for exploring the solutions in a domain. > > `scipy.optimize.newton` can now accept a scalar or an array > > ``MINPACK`` usage is now thread-safe, such that ``MINPACK`` + callbacks may > be used on multiple threads. > > `scipy.signal` improvements > ---------------------------- > > Digital filter design functions now include a parameter to specify the > sampling > rate. Previously, digital filters could only be specified using normalized > frequency, but different functions used different scales (e.g. 0 to 1 for > ``butter`` vs 0 to π for ``freqz``), leading to errors and confusion. With > the ``fs`` parameter, ordinary frequencies can now be entered directly into > functions, with the normalization handled internally. > > ``find_peaks`` and related functions no longer raise an exception if the > properties of a peak have unexpected values (e.g. a prominence of 0). A > ``PeakPropertyWarning`` is given instead. > > The new keyword argument ``plateau_size`` was added to ``find_peaks``. > ``plateau_size`` may be used to select peaks based on the length of the > flat top of a peak. > > ``welch()`` and ``csd()`` methods in `scipy.signal` now support calculation > of a median average PSD, using ``average='mean'`` keyword > > `scipy.sparse` improvements > ---------------------------- > > The `scipy.sparse.bsr_matrix.tocsr` method is now implemented directly > instead > of converting via COO format, and the `scipy.sparse.bsr_matrix.tocsc` > method > is now also routed via CSR conversion instead of COO. The efficiency of > both > conversions is now improved. > > The issue where SuperLU or UMFPACK solvers crashed on matrices with > non-canonical format in `scipy.sparse.linalg` was fixed. The solver wrapper > canonicalizes the matrix if necessary before calling the SuperLU or UMFPACK > solver. > > The ``largest`` option of `scipy.sparse.linalg.lobpcg()` was fixed to have > a correct (and expected) behavior. The order of the eigenvalues was made > consistent with the ARPACK solver (``eigs()``), i.e. ascending for the > smallest eigenvalues, and descending for the largest eigenvalues. > > The `scipy.sparse.random` function is now faster and also supports integer > and > complex values by passing the appropriate value to the ``dtype`` argument. > > `scipy.spatial` improvements > ----------------------------- > > The function `scipy.spatial.distance.jaccard` was modified to return 0 > instead > of ``np.nan`` when two all-zero vectors are compared. > > Support for the Jensen Shannon distance, the square-root of the > divergence, has > been added under `scipy.spatial.distance.jensenshannon` > > An optional keyword was added to the function > `scipy.spatial.cKDTree.query_ball_point()` to sort or not sort the returned > indices. Not sorting the indices can speed up calls. > > A new category of quaternion-based transformations are available in > `scipy.spatial.transform`, including spherical linear interpolation of > rotations (``Slerp``), conversions to and from quaternions, Euler angles, > and general rotation and inversion capabilities > (`spatial.transform.Rotation`), and uniform random sampling of 3D > rotations (`spatial.transform.Rotation.random`). > > `scipy.stats` improvements > --------------------------- > > The Yeo-Johnson power transformation is now supported (``yeojohnson``, > ``yeojohnson_llf``, ``yeojohnson_normmax``, ``yeojohnson_normplot``). > Unlike > the Box-Cox transformation, the Yeo-Johnson transformation can accept > negative > values. > > Added a general method to sample random variates based on the density > only, in > the new function ``rvs_ratio_uniforms``. > > The Yule-Simon distribution (``yulesimon``) was added -- this is a new > discrete probability distribution. > > ``stats`` and ``mstats`` now have access to a new regression method, > ``siegelslopes``, a robust linear regression algorithm > > `scipy.stats.gaussian_kde` now has the ability to deal with weighted > samples, > and should have a modest improvement in performance > > Levy Stable Parameter Estimation, PDF, and CDF calculations are now > supported > for `scipy.stats.levy_stable`. > > The Brunner-Munzel test is now available as ``brunnermunzel`` in ``stats`` > and ``mstats`` > > `scipy.linalg` improvements > --------------------------- > > `scipy.linalg.lapack` now exposes the LAPACK routines using the Rectangular > Full Packed storage (RFP) for upper triangular, lower triangular, > symmetric, > or Hermitian matrices; the upper trapezoidal fat matrix RZ decomposition > routines are now available as well. > > Deprecated features > =================== > The functions ``hyp2f0``, ``hyp1f2`` and ``hyp3f0`` in ``scipy.special`` > have > been deprecated. > > > Backwards incompatible changes > ============================== > > LAPACK version 3.4.0 or later is now required. Building with > Apple Accelerate is no longer supported. > > The function ``scipy.linalg.subspace_angles(A, B)`` now gives correct > results for all angles. Before this, the function only returned > correct values for those angles which were greater than pi/4. > > Support for the Bento build system has been removed. Bento has not been > maintained for several years, and did not have good Python 3 or wheel > support, > hence it was time to remove it. > > The required signature of `scipy.optimize.lingprog` ``method=simplex`` > callback function has changed. Before iteration begins, the simplex solver > first converts the problem into a standard form that does not, in general, > have the same variables or constraints > as the problem defined by the user. Previously, the simplex solver would > pass a > user-specified callback function several separate arguments, such as the > current solution vector ``xk``, corresponding to this standard form > problem. > Unfortunately, the relationship between the standard form problem and the > user-defined problem was not documented, limiting the utility of the > information passed to the callback function. > > In addition to numerous bug fix changes, the simplex solver now passes a > user-specified callback function a single ``OptimizeResult`` object > containing > information that corresponds directly to the user-defined problem. In > future > releases, this ``OptimizeResult`` object may be expanded to include > additional > information, such as variables corresponding to the standard-form problem > and > information concerning the relationship between the standard-form and > user-defined problems. > > The implementation of `scipy.sparse.random` has changed, and this affects > the > numerical values returned for both ``sparse.random`` and ``sparse.rand`` > for > some matrix shapes and a given seed. > > `scipy.optimize.newton` will no longer use Halley's method in cases where > it > negatively impacts convergence > > Other changes > ============= > > > Authors > ======= > > * @endolith > * @luzpaz > * Hameer Abbasi + > * akahard2dj + > * Anton Akhmerov > * Joseph Albert > * alexthomas93 + > * ashish + > * atpage + > * Blair Azzopardi + > * Yoshiki Vázquez Baeza > * Bence Bagi + > * Christoph Baumgarten > * Lucas Bellomo + > * BH4 + > * Aditya Bharti > * Max Bolingbroke > * François Boulogne > * Ward Bradt + > * Matthew Brett > * Evgeni Burovski > * Rafał Byczek + > * Alfredo Canziani + > * CJ Carey > * Lucía Cheung + > * Poom Chiarawongse + > * Jeanne Choo + > * Robert Cimrman > * Graham Clenaghan + > * cynthia-rempel + > * Johannes Damp + > * Jaime Fernandez del Rio > * Dowon + > * emmi474 + > * Stefan Endres + > * Thomas Etherington + > * Piotr Figiel > * Alex Fikl + > * fo40225 + > * Joseph Fox-Rabinovitz > * Lars G > * Abhinav Gautam + > * Stiaan Gerber + > * C.A.M. Gerlach + > * Ralf Gommers > * Todd Goodall > * Lars Grueter + > * Sylvain Gubian + > * Matt Haberland > * David Hagen > * Will Handley + > * Charles Harris > * Ian Henriksen > * Thomas Hisch + > * Theodore Hu > * Michael Hudson-Doyle + > * Nicolas Hug + > * jakirkham + > * Jakob Jakobson + > * James + > * Jan Schlüter > * jeanpauphilet + > * josephmernst + > * Kai + > * Kai-Striega + > * kalash04 + > * Toshiki Kataoka + > * Konrad0 + > * Tom Krauss + > * Johannes Kulick > * Lars Grüter + > * Eric Larson > * Denis Laxalde > * Will Lee + > * Katrin Leinweber + > * Yin Li + > * P. L. Lim + > * Jesse Livezey + > * Duncan Macleod + > * MatthewFlamm + > * Nikolay Mayorov > * Mike McClurg + > * Christian Meyer + > * Mark Mikofski > * Naoto Mizuno + > * mohmmadd + > * Nathan Musoke > * Anju Geetha Nair + > * Andrew Nelson > * Ayappan P + > * Nick Papior > * Haesun Park + > * Ronny Pfannschmidt + > * pijyoi + > * Ilhan Polat > * Anthony Polloreno + > * Ted Pudlik > * puenka > * Eric Quintero > * Pradeep Reddy Raamana + > * Vyas Ramasubramani + > * Ramon Viñas + > * Tyler Reddy > * Joscha Reimer > * Antonio H Ribeiro > * richardjgowers + > * Rob + > * robbystk + > * Lucas Roberts + > * rohan + > * Joaquin Derrac Rus + > * Josua Sassen + > * Bruce Sharpe + > * Max Shinn + > * Scott Sievert > * Sourav Singh > * Strahinja Lukić + > * Kai Striega + > * Shinya SUZUKI + > * Mike Toews + > * Piotr Uchwat > * Miguel de Val-Borro + > * Nicky van Foreest > * Paul van Mulbregt > * Gael Varoquaux > * Pauli Virtanen > * Stefan van der Walt > * Warren Weckesser > * Joshua Wharton + > * Bernhard M. Wiedemann + > * Eric Wieser > * Josh Wilson > * Tony Xiang + > * Roman Yurchak + > * Roy Zywina + > > A total of 137 people contributed to this release. > People with a "+" by their names contributed a patch for the first time. > This list of names is automatically generated, and may not be fully > complete. > > Issues closed for 1.2.0 > ------------------------ > > * `#9520 <https://github.com/scipy/scipy/issues/9520>`__: > signal.correlate with method='fft' doesn't benefit from long... > * `#9547 <https://github.com/scipy/scipy/issues/9547>`__: signature of > dual_annealing doesn't match other optimizers > * `#9540 <https://github.com/scipy/scipy/issues/9540>`__: SciPy v1.2.0rc1 > cannot be imported on Python 2.7.15 > * `#1240 <https://github.com/scipy/scipy/issues/1240>`__: Allowing > multithreaded use of minpack through scipy.optimize... > * `#1432 <https://github.com/scipy/scipy/issues/1432>`__: > scipy.stats.mode extremely slow (Trac #905) > * `#3372 <https://github.com/scipy/scipy/issues/3372>`__: Please add > Sphinx search field to online scipy html docs > * `#3678 <https://github.com/scipy/scipy/issues/3678>`__: > _clough_tocher_2d_single direction between centroids > * `#4174 <https://github.com/scipy/scipy/issues/4174>`__: lobpcg > "largest" option invalid? > * `#5493 <https://github.com/scipy/scipy/issues/5493>`__: anderson_ksamp > p-values>1 > * `#5743 <https://github.com/scipy/scipy/issues/5743>`__: slsqp fails to > detect infeasible problem > * `#6139 <https://github.com/scipy/scipy/issues/6139>`__: > scipy.optimize.linprog failed to find a feasible starting point... > * `#6358 <https://github.com/scipy/scipy/issues/6358>`__: stats: > docstring for `vonmises_line` points to `vonmises_line`... > * `#6498 <https://github.com/scipy/scipy/issues/6498>`__: runtests.py is > missing in pypi distfile > * `#7426 <https://github.com/scipy/scipy/issues/7426>`__: > scipy.stats.ksone(n).pdf(x) returns nan for positive values of... > * `#7455 <https://github.com/scipy/scipy/issues/7455>`__: > scipy.stats.ksone.pdf(2,x) return incorrect values for x near... > * `#7456 <https://github.com/scipy/scipy/issues/7456>`__: > scipy.special.smirnov and scipy.special.smirnovi have accuracy... > * `#7492 <https://github.com/scipy/scipy/issues/7492>`__: > scipy.special.kolmogorov(x)/kolmogi(p) inefficient, inaccurate... > * `#7914 <https://github.com/scipy/scipy/issues/7914>`__: TravisCI not > failing when it should for -OO run > * `#8064 <https://github.com/scipy/scipy/issues/8064>`__: linalg.solve > test crashes on Windows > * `#8212 <https://github.com/scipy/scipy/issues/8212>`__: LAPACK > Rectangular Full Packed routines > * `#8256 <https://github.com/scipy/scipy/issues/8256>`__: > differential_evolution bug converges to wrong results in complex... > * `#8443 <https://github.com/scipy/scipy/issues/8443>`__: Deprecate > `hyp2f0`, `hyp1f2`, and `hyp3f0`? > * `#8452 <https://github.com/scipy/scipy/issues/8452>`__: DOC: ARPACK > tutorial has two conflicting equations > * `#8680 <https://github.com/scipy/scipy/issues/8680>`__: scipy fails > compilation when building from source > * `#8686 <https://github.com/scipy/scipy/issues/8686>`__: Division by > zero in _trustregion.py when x0 is exactly equal... > * `#8700 <https://github.com/scipy/scipy/issues/8700>`__: _MINPACK_LOCK > not held when calling into minpack from least_squares > * `#8786 <https://github.com/scipy/scipy/issues/8786>`__: erroneous > moment values for t-distribution > * `#8791 <https://github.com/scipy/scipy/issues/8791>`__: Checking COLA > condition in istft should be optional (or omitted) > * `#8843 <https://github.com/scipy/scipy/issues/8843>`__: imresize cannot > be deprecated just yet > * `#8844 <https://github.com/scipy/scipy/issues/8844>`__: Inverse Wishart > Log PDF Incorrect for Non-diagonal Scale Matrix? > * `#8878 <https://github.com/scipy/scipy/issues/8878>`__: vonmises and > vonmises_line in stats: vonmises wrong and superfluous? > * `#8895 <https://github.com/scipy/scipy/issues/8895>`__: v1.1.0 > `ndi.rotate` documentation – reused parameters not filled... > * `#8900 <https://github.com/scipy/scipy/issues/8900>`__: Missing complex > conjugation in scipy.sparse.linalg.LinearOperator > * `#8904 <https://github.com/scipy/scipy/issues/8904>`__: BUG: if zero > derivative at root, then Newton fails with RuntimeWarning > * `#8911 <https://github.com/scipy/scipy/issues/8911>`__: > make_interp_spline bc_type incorrect input interpretation > * `#8942 <https://github.com/scipy/scipy/issues/8942>`__: MAINT: Refactor > `_linprog.py` and `_linprog_ip.py` to remove... > * `#8947 <https://github.com/scipy/scipy/issues/8947>`__: np.int64 in > scipy.fftpack.next_fast_len > * `#9020 <https://github.com/scipy/scipy/issues/9020>`__: BUG: > linalg.subspace_angles gives wrong results > * `#9033 <https://github.com/scipy/scipy/issues/9033>`__: > scipy.stats.normaltest sometimes gives incorrect returns b/c... > * `#9036 <https://github.com/scipy/scipy/issues/9036>`__: Bizarre times > for `scipy.sparse.rand` function with 'low' density... > * `#9044 <https://github.com/scipy/scipy/issues/9044>`__: > optimize.minimize(method=`trust-constr`) result dict does not... > * `#9071 <https://github.com/scipy/scipy/issues/9071>`__: doc/linalg: add > cho_solve_banded to see also of cholesky_banded > * `#9082 <https://github.com/scipy/scipy/issues/9082>`__: eigenvalue > sorting in scipy.sparse.linalg.eigsh > * `#9086 <https://github.com/scipy/scipy/issues/9086>`__: > signaltools.py:491: FutureWarning: Using a non-tuple sequence... > * `#9091 <https://github.com/scipy/scipy/issues/9091>`__: > test_spline_filter failure on 32-bit > * `#9122 <https://github.com/scipy/scipy/issues/9122>`__: Typo on scipy > minimization tutorial > * `#9135 <https://github.com/scipy/scipy/issues/9135>`__: doc error at > https://docs.scipy.org/doc/scipy/reference/tutorial/stats/discrete_poisson.html > * `#9167 <https://github.com/scipy/scipy/issues/9167>`__: DOC: BUG: typo > in ndimage LowLevelCallable tutorial example > * `#9169 <https://github.com/scipy/scipy/issues/9169>`__: truncnorm does > not work if b < a in scipy.stats > * `#9250 <https://github.com/scipy/scipy/issues/9250>`__: > scipy.special.tests.test_mpmath::TestSystematic::test_pcfw fails... > * `#9259 <https://github.com/scipy/scipy/issues/9259>`__: rv.expect() == > rv.mean() is false for rv.mean() == nan (and inf) > * `#9286 <https://github.com/scipy/scipy/issues/9286>`__: DOC: Rosenbrock > expression in optimize.minimize tutorial > * `#9316 <https://github.com/scipy/scipy/issues/9316>`__: SLSQP fails in > nested optimization > * `#9337 <https://github.com/scipy/scipy/issues/9337>`__: > scipy.signal.find_peaks key typo in documentation > * `#9345 <https://github.com/scipy/scipy/issues/9345>`__: Example from > documentation of scipy.sparse.linalg.eigs raises... > * `#9383 <https://github.com/scipy/scipy/issues/9383>`__: Default value > for "mode" in "ndimage.shift" > * `#9419 <https://github.com/scipy/scipy/issues/9419>`__: dual_annealing > off by one in the number of iterations > * `#9442 <https://github.com/scipy/scipy/issues/9442>`__: Error in > Defintion of Rosenbrock Function > * `#9453 <https://github.com/scipy/scipy/issues/9453>`__: TST: > test_eigs_consistency() doesn't have consistent results > > > Pull requests for 1.2.0 > ------------------------ > > * `#9526 <https://github.com/scipy/scipy/pull/9526>`__: TST: relax > precision requirements in signal.correlate tests > * `#9507 <https://github.com/scipy/scipy/pull/9507>`__: CI: MAINT: Skip a > ckdtree test on pypy > * `#9512 <https://github.com/scipy/scipy/pull/9512>`__: TST: > test_random_sampling 32-bit handling > * `#9494 <https://github.com/scipy/scipy/pull/9494>`__: TST: > test_kolmogorov xfail 32-bit > * `#9486 <https://github.com/scipy/scipy/pull/9486>`__: BUG: fix sparse > random int handling > * `#9550 <https://github.com/scipy/scipy/pull/9550>`__: BUG: > scipy/_lib/_numpy_compat: get_randint > * `#9549 <https://github.com/scipy/scipy/pull/9549>`__: MAINT: make > dual_annealing signature match other optimizers > * `#9541 <https://github.com/scipy/scipy/pull/9541>`__: BUG: fix > SyntaxError due to non-ascii character on Python 2.7 > * `#7352 <https://github.com/scipy/scipy/pull/7352>`__: ENH: add Brunner > Munzel test to scipy.stats. > * `#7373 <https://github.com/scipy/scipy/pull/7373>`__: BUG: Jaccard > distance for all-zero arrays would return np.nan > * `#7374 <https://github.com/scipy/scipy/pull/7374>`__: ENH: Add PDF, CDF > and parameter estimation for Stable Distributions > * `#8098 <https://github.com/scipy/scipy/pull/8098>`__: ENH: Add shgo for > global optimization of NLPs. > * `#8203 <https://github.com/scipy/scipy/pull/8203>`__: ENH: adding > simulated dual annealing to optimize > * `#8259 <https://github.com/scipy/scipy/pull/8259>`__: Option to follow > original Storn and Price algorithm and its parallelisation > * `#8293 <https://github.com/scipy/scipy/pull/8293>`__: ENH add > ratio-of-uniforms method for rv generation to scipy.stats > * `#8294 <https://github.com/scipy/scipy/pull/8294>`__: BUG: Fix slowness > in stats.mode > * `#8295 <https://github.com/scipy/scipy/pull/8295>`__: ENH: add Jensen > Shannon distance to `scipy.spatial.distance` > * `#8357 <https://github.com/scipy/scipy/pull/8357>`__: ENH: vectorize > scalar zero-search-functions > * `#8397 <https://github.com/scipy/scipy/pull/8397>`__: Add `fs=` > parameter to filter design functions > * `#8537 <https://github.com/scipy/scipy/pull/8537>`__: ENH: Implement > mode parameter for spline filtering. > * `#8558 <https://github.com/scipy/scipy/pull/8558>`__: ENH: small > speedup for stats.gaussian_kde > * `#8560 <https://github.com/scipy/scipy/pull/8560>`__: BUG: fix p-value > calc of anderson_ksamp in scipy.stats > * `#8614 <https://github.com/scipy/scipy/pull/8614>`__: ENH: correct > p-values for stats.kendalltau and stats.mstats.kendalltau > * `#8670 <https://github.com/scipy/scipy/pull/8670>`__: ENH: Require > Lapack 3.4.0 > * `#8683 <https://github.com/scipy/scipy/pull/8683>`__: Correcting kmeans > documentation > * `#8725 <https://github.com/scipy/scipy/pull/8725>`__: MAINT: Cleanup > scipy.optimize.leastsq > * `#8726 <https://github.com/scipy/scipy/pull/8726>`__: BUG: Fix > _get_output in scipy.ndimage to support string > * `#8733 <https://github.com/scipy/scipy/pull/8733>`__: MAINT: stats: A > bit of clean up. > * `#8737 <https://github.com/scipy/scipy/pull/8737>`__: BUG: Improve > numerical precision/convergence failures of smirnov/kolmogorov > * `#8738 <https://github.com/scipy/scipy/pull/8738>`__: MAINT: stats: A > bit of clean up in test_distributions.py. > * `#8740 <https://github.com/scipy/scipy/pull/8740>`__: BF/ENH: make > minpack thread safe > * `#8742 <https://github.com/scipy/scipy/pull/8742>`__: BUG: Fix division > by zero in trust-region optimization methods > * `#8746 <https://github.com/scipy/scipy/pull/8746>`__: MAINT: signal: > Fix a docstring of a private function, and fix... > * `#8750 <https://github.com/scipy/scipy/pull/8750>`__: DOC clarified > description of norminvgauss in scipy.stats > * `#8753 <https://github.com/scipy/scipy/pull/8753>`__: DOC: signal: Fix > a plot title in the chirp docstring. > * `#8755 <https://github.com/scipy/scipy/pull/8755>`__: DOC: MAINT: Fix > link to the wheel documentation in developer... > * `#8760 <https://github.com/scipy/scipy/pull/8760>`__: BUG: stats: > boltzmann wasn't setting the upper bound. > * `#8763 <https://github.com/scipy/scipy/pull/8763>`__: [DOC] Improved > scipy.cluster.hierarchy documentation > * `#8765 <https://github.com/scipy/scipy/pull/8765>`__: DOC: added > example for scipy.stat.mstats.tmin > * `#8788 <https://github.com/scipy/scipy/pull/8788>`__: DOC: fix > definition of optional `disp` parameter > * `#8802 <https://github.com/scipy/scipy/pull/8802>`__: MAINT: Suppress > dd_real unused function compiler warnings. > * `#8803 <https://github.com/scipy/scipy/pull/8803>`__: ENH: Add > full_output support to optimize.newton() > * `#8804 <https://github.com/scipy/scipy/pull/8804>`__: MAINT: stats > cleanup > * `#8808 <https://github.com/scipy/scipy/pull/8808>`__: DOC: add note > about isinstance for frozen rvs > * `#8812 <https://github.com/scipy/scipy/pull/8812>`__: Updated numpydoc > submodule > * `#8813 <https://github.com/scipy/scipy/pull/8813>`__: MAINT: stats: Fix > multinomial docstrings, and do some clean up. > * `#8816 <https://github.com/scipy/scipy/pull/8816>`__: BUG: fixed _stats > of t-distribution in scipy.stats > * `#8817 <https://github.com/scipy/scipy/pull/8817>`__: BUG: ndimage: Fix > validation of the origin argument in correlate... > * `#8822 <https://github.com/scipy/scipy/pull/8822>`__: BUG: integrate: > Fix crash with repeated t values in odeint. > * `#8832 <https://github.com/scipy/scipy/pull/8832>`__: Hyperlink DOIs > against preferred resolver > * `#8837 <https://github.com/scipy/scipy/pull/8837>`__: BUG: sparse: > Ensure correct dtype for sparse comparison operations. > * `#8839 <https://github.com/scipy/scipy/pull/8839>`__: DOC: stats: A few > tweaks to the linregress docstring. > * `#8846 <https://github.com/scipy/scipy/pull/8846>`__: BUG: stats: Fix > logpdf method of invwishart. > * `#8849 <https://github.com/scipy/scipy/pull/8849>`__: DOC: signal: > Fixed mistake in the firwin docstring. > * `#8854 <https://github.com/scipy/scipy/pull/8854>`__: DOC: fix type > descriptors in ltisys documentation > * `#8865 <https://github.com/scipy/scipy/pull/8865>`__: Fix tiny typo in > docs for chi2 pdf > * `#8870 <https://github.com/scipy/scipy/pull/8870>`__: Fixes related to > invertibility of STFT > * `#8872 <https://github.com/scipy/scipy/pull/8872>`__: ENH: special: Add > the softmax function > * `#8874 <https://github.com/scipy/scipy/pull/8874>`__: DOC correct gamma > function in docstrings in scipy.stats > * `#8876 <https://github.com/scipy/scipy/pull/8876>`__: ENH: Added TOMS > Algorithm 748 as 1-d root finder; 17 test function... > * `#8882 <https://github.com/scipy/scipy/pull/8882>`__: ENH: Only use > Halley's adjustment to Newton if close enough. > * `#8883 <https://github.com/scipy/scipy/pull/8883>`__: FIX: optimize: > make jac and hess truly optional for 'trust-constr' > * `#8885 <https://github.com/scipy/scipy/pull/8885>`__: TST: Do not error > on warnings raised about non-tuple indexing. > * `#8887 <https://github.com/scipy/scipy/pull/8887>`__: MAINT: filter out > np.matrix PendingDeprecationWarning's in numpy... > * `#8889 <https://github.com/scipy/scipy/pull/8889>`__: DOC: optimize: > separate legacy interfaces from new ones > * `#8890 <https://github.com/scipy/scipy/pull/8890>`__: ENH: Add > optimize.root_scalar() as a universal dispatcher for... > * `#8899 <https://github.com/scipy/scipy/pull/8899>`__: DCT-IV, DST-IV > and DCT-I, DST-I orthonormalization support in... > * `#8901 <https://github.com/scipy/scipy/pull/8901>`__: MAINT: Reorganize > flapack.pyf.src file > * `#8907 <https://github.com/scipy/scipy/pull/8907>`__: BUG: ENH: Check > if guess for newton is already zero before checking... > * `#8908 <https://github.com/scipy/scipy/pull/8908>`__: ENH: Make sorting > optional for cKDTree.query_ball_point() > * `#8910 <https://github.com/scipy/scipy/pull/8910>`__: DOC: > sparse.csgraph simple examples. > * `#8914 <https://github.com/scipy/scipy/pull/8914>`__: DOC: interpolate: > fix equivalences of string aliases > * `#8918 <https://github.com/scipy/scipy/pull/8918>`__: add > float_control(precise, on) to _fpumode.c > * `#8919 <https://github.com/scipy/scipy/pull/8919>`__: MAINT: > interpolate: improve error messages for common `bc_type`... > * `#8920 <https://github.com/scipy/scipy/pull/8920>`__: DOC: update > Contributing to SciPy to say "prefer no PEP8 only... > * `#8924 <https://github.com/scipy/scipy/pull/8924>`__: MAINT: special: > deprecate `hyp2f0`, `hyp1f2`, and `hyp3f0` > * `#8927 <https://github.com/scipy/scipy/pull/8927>`__: MAINT: special: > remove `errprint` > * `#8932 <https://github.com/scipy/scipy/pull/8932>`__: Fix broadcasting > scale arg of entropy > * `#8936 <https://github.com/scipy/scipy/pull/8936>`__: Fix (some) > non-tuple index warnings > * `#8937 <https://github.com/scipy/scipy/pull/8937>`__: ENH: implement > sparse matrix BSR to CSR conversion directly. > * `#8938 <https://github.com/scipy/scipy/pull/8938>`__: DOC: add > @_ni_docstrings.docfiller in ndimage.rotate > * `#8940 <https://github.com/scipy/scipy/pull/8940>`__: Update > _discrete_distns.py > * `#8943 <https://github.com/scipy/scipy/pull/8943>`__: DOC: Finish > dangling sentence in `convolve` docstring > * `#8944 <https://github.com/scipy/scipy/pull/8944>`__: MAINT: Address > tuple indexing and warnings > * `#8945 <https://github.com/scipy/scipy/pull/8945>`__: ENH: > spatial.transform.Rotation [GSOC2018] > * `#8950 <https://github.com/scipy/scipy/pull/8950>`__: csgraph Dijkstra > function description rewording > * `#8953 <https://github.com/scipy/scipy/pull/8953>`__: DOC, MAINT: HTTP > -> HTTPS, and other linkrot fixes > * `#8955 <https://github.com/scipy/scipy/pull/8955>`__: BUG: np.int64 in > scipy.fftpack.next_fast_len > * `#8958 <https://github.com/scipy/scipy/pull/8958>`__: MAINT: Add more > descriptive error message for phase one simplex. > * `#8962 <https://github.com/scipy/scipy/pull/8962>`__: BUG: > sparse.linalg: add missing conjugate to _ScaledLinearOperator.adjoint > * `#8963 <https://github.com/scipy/scipy/pull/8963>`__: BUG: > sparse.linalg: downgrade LinearOperator TypeError to warning > * `#8965 <https://github.com/scipy/scipy/pull/8965>`__: ENH: Wrapped RFP > format and RZ decomposition routines > * `#8969 <https://github.com/scipy/scipy/pull/8969>`__: MAINT: doc and > code fixes for optimize.newton > * `#8970 <https://github.com/scipy/scipy/pull/8970>`__: Added 'average' > keyword for welch/csd to enable median averaging > * `#8971 <https://github.com/scipy/scipy/pull/8971>`__: Better imresize > deprecation warning > * `#8972 <https://github.com/scipy/scipy/pull/8972>`__: MAINT: Switch > np.where(c) for np.nonzero(c) > * `#8975 <https://github.com/scipy/scipy/pull/8975>`__: MAINT: Fix > warning-based failures > * `#8979 <https://github.com/scipy/scipy/pull/8979>`__: DOC: fix > description of count_sort keyword of dendrogram > * `#8982 <https://github.com/scipy/scipy/pull/8982>`__: MAINT: optimize: > Fixed minor mistakes in test_linprog.py (#8978) > * `#8984 <https://github.com/scipy/scipy/pull/8984>`__: BUG: > sparse.linalg: ensure expm casts integer inputs to float > * `#8986 <https://github.com/scipy/scipy/pull/8986>`__: BUG: > optimize/slsqp: do not exit with convergence on steps where... > * `#8989 <https://github.com/scipy/scipy/pull/8989>`__: MAINT: use > collections.abc in basinhopping > * `#8990 <https://github.com/scipy/scipy/pull/8990>`__: ENH extend > p-values of anderson_ksamp in scipy.stats > * `#8991 <https://github.com/scipy/scipy/pull/8991>`__: ENH: Weighted kde > * `#8993 <https://github.com/scipy/scipy/pull/8993>`__: ENH: > spatial.transform.Rotation.random [GSOC 2018] > * `#8994 <https://github.com/scipy/scipy/pull/8994>`__: ENH: > spatial.transform.Slerp [GSOC 2018] > * `#8995 <https://github.com/scipy/scipy/pull/8995>`__: TST: time.time in > test > * `#9007 <https://github.com/scipy/scipy/pull/9007>`__: Fix typo in > fftpack.rst > * `#9013 <https://github.com/scipy/scipy/pull/9013>`__: Added correct > plotting code for two sided output from spectrogram > * `#9014 <https://github.com/scipy/scipy/pull/9014>`__: BUG: > differential_evolution with inf objective functions > * `#9017 <https://github.com/scipy/scipy/pull/9017>`__: BUG: fixed #8446 > corner case for asformat(array|dense) > * `#9018 <https://github.com/scipy/scipy/pull/9018>`__: MAINT: > _lib/ccallback: remove unused code > * `#9021 <https://github.com/scipy/scipy/pull/9021>`__: BUG: Issue with > subspace_angles > * `#9022 <https://github.com/scipy/scipy/pull/9022>`__: DOC: Added "See > Also" section to lombscargle docstring > * `#9034 <https://github.com/scipy/scipy/pull/9034>`__: BUG: Fix > tolerance printing behavior, remove meaningless tol... > * `#9035 <https://github.com/scipy/scipy/pull/9035>`__: TST: improve > signal.bsplines test coverage > * `#9037 <https://github.com/scipy/scipy/pull/9037>`__: ENH: add a new > init method for k-means > * `#9039 <https://github.com/scipy/scipy/pull/9039>`__: DOC: Add examples > to fftpack.irfft docstrings > * `#9048 <https://github.com/scipy/scipy/pull/9048>`__: ENH: > scipy.sparse.random > * `#9050 <https://github.com/scipy/scipy/pull/9050>`__: BUG: > scipy.io.hb_write: fails for matrices not in csc format > * `#9051 <https://github.com/scipy/scipy/pull/9051>`__: MAINT: Fix slow > sparse.rand for k < mn/3 (#9036). > * `#9054 <https://github.com/scipy/scipy/pull/9054>`__: MAINT: spatial: > Explicitly initialize LAPACK output parameters. > * `#9055 <https://github.com/scipy/scipy/pull/9055>`__: DOC: Add examples > to scipy.special docstrings > * `#9056 <https://github.com/scipy/scipy/pull/9056>`__: ENH: Use one > thread in OpenBLAS > * `#9059 <https://github.com/scipy/scipy/pull/9059>`__: DOC: Update > README with link to Code of Conduct > * `#9060 <https://github.com/scipy/scipy/pull/9060>`__: BLD: remove > support for the Bento build system. > * `#9062 <https://github.com/scipy/scipy/pull/9062>`__: DOC add sections > to overview in scipy.stats > * `#9066 <https://github.com/scipy/scipy/pull/9066>`__: BUG: Correct > "remez" error message > * `#9069 <https://github.com/scipy/scipy/pull/9069>`__: DOC: update > linalg section of roadmap for LAPACK versions. > * `#9079 <https://github.com/scipy/scipy/pull/9079>`__: MAINT: add > spatial.transform to refguide check; complete some... > * `#9081 <https://github.com/scipy/scipy/pull/9081>`__: MAINT: Add > warnings if pivot value is close to tolerance in linprog(method='simplex') > * `#9084 <https://github.com/scipy/scipy/pull/9084>`__: BUG fix incorrect > p-values of kurtosistest in scipy.stats > * `#9095 <https://github.com/scipy/scipy/pull/9095>`__: DOC: add sections > to mstats overview in scipy.stats > * `#9096 <https://github.com/scipy/scipy/pull/9096>`__: BUG: Add test for > Stackoverflow example from issue 8174. > * `#9101 <https://github.com/scipy/scipy/pull/9101>`__: ENH: add Siegel > slopes (robust regression) to scipy.stats > * `#9105 <https://github.com/scipy/scipy/pull/9105>`__: allow > resample_poly() to output float32 for float32 inputs. > * `#9112 <https://github.com/scipy/scipy/pull/9112>`__: MAINT: optimize: > make trust-constr accept constraint dict (#9043) > * `#9118 <https://github.com/scipy/scipy/pull/9118>`__: Add doc entry to > cholesky_banded > * `#9120 <https://github.com/scipy/scipy/pull/9120>`__: eigsh > documentation parameters > * `#9125 <https://github.com/scipy/scipy/pull/9125>`__: interpolative: > correctly reconstruct full rank matrices > * `#9126 <https://github.com/scipy/scipy/pull/9126>`__: MAINT: Use > warnings for unexpected peak properties > * `#9129 <https://github.com/scipy/scipy/pull/9129>`__: BUG: Do not catch > and silence KeyboardInterrupt > * `#9131 <https://github.com/scipy/scipy/pull/9131>`__: DOC: Correct the > typo in scipy.optimize tutorial page > * `#9133 <https://github.com/scipy/scipy/pull/9133>`__: FIX: Avoid use of > bare except > * `#9134 <https://github.com/scipy/scipy/pull/9134>`__: DOC: Update of > 'return_eigenvectors' description > * `#9137 <https://github.com/scipy/scipy/pull/9137>`__: DOC: typo fixes > for discrete Poisson tutorial > * `#9139 <https://github.com/scipy/scipy/pull/9139>`__: FIX: Doctest > failure in optimize tutorial > * `#9143 <https://github.com/scipy/scipy/pull/9143>`__: DOC: missing > sigma in Pearson r formula > * `#9145 <https://github.com/scipy/scipy/pull/9145>`__: MAINT: Refactor > linear programming solvers > * `#9149 <https://github.com/scipy/scipy/pull/9149>`__: FIX: Make > scipy.odr.ODR ifixx equal to its data.fix if given > * `#9156 <https://github.com/scipy/scipy/pull/9156>`__: DOC: special: > Mention the sigmoid function in the expit docstring. > * `#9160 <https://github.com/scipy/scipy/pull/9160>`__: Fixed a latex > delimiter error in levy() > * `#9170 <https://github.com/scipy/scipy/pull/9170>`__: DOC: correction / > update of docstrings of distributions in scipy.stats > * `#9171 <https://github.com/scipy/scipy/pull/9171>`__: better > description of the hierarchical clustering parameter > * `#9174 <https://github.com/scipy/scipy/pull/9174>`__: domain check for > a < b in stats.truncnorm > * `#9175 <https://github.com/scipy/scipy/pull/9175>`__: DOC: Minor > grammar fix > * `#9176 <https://github.com/scipy/scipy/pull/9176>`__: BUG: > CloughTocher2DInterpolator: fix miscalculation at neighborless... > * `#9177 <https://github.com/scipy/scipy/pull/9177>`__: BUILD: Document > the "clean" target in the doc/Makefile. > * `#9178 <https://github.com/scipy/scipy/pull/9178>`__: MAINT: make > refguide-check more robust for printed numpy arrays > * `#9186 <https://github.com/scipy/scipy/pull/9186>`__: MAINT: Remove > np.ediff1d occurence > * `#9188 <https://github.com/scipy/scipy/pull/9188>`__: DOC: correct typo > in extending ndimage with C > * `#9190 <https://github.com/scipy/scipy/pull/9190>`__: ENH: Support > specifying axes for fftconvolve > * `#9192 <https://github.com/scipy/scipy/pull/9192>`__: MAINT: optimize: > fixed @pv style suggestions from #9112 > * `#9200 <https://github.com/scipy/scipy/pull/9200>`__: Fix > make_interp_spline(..., k=0 or 1, axis<0) > * `#9201 <https://github.com/scipy/scipy/pull/9201>`__: BUG: > sparse.linalg/gmres: use machine eps in breakdown check > * `#9204 <https://github.com/scipy/scipy/pull/9204>`__: MAINT: fix up > stats.spearmanr and match mstats.spearmanr with... > * `#9206 <https://github.com/scipy/scipy/pull/9206>`__: MAINT: include > benchmarks and dev files in sdist. > * `#9208 <https://github.com/scipy/scipy/pull/9208>`__: TST: signal: bump > bsplines test tolerance for complex data > * `#9210 <https://github.com/scipy/scipy/pull/9210>`__: TST: mark tests > as slow, fix missing random seed > * `#9211 <https://github.com/scipy/scipy/pull/9211>`__: ENH: add > capability to specify orders in pade func > * `#9217 <https://github.com/scipy/scipy/pull/9217>`__: MAINT: Include > ``success`` and ``nit`` in OptimizeResult returned... > * `#9222 <https://github.com/scipy/scipy/pull/9222>`__: ENH: interpolate: > Use scipy.spatial.distance to speed-up Rbf > * `#9229 <https://github.com/scipy/scipy/pull/9229>`__: MNT: Fix Fourier > filter double case > * `#9233 <https://github.com/scipy/scipy/pull/9233>`__: BUG: > spatial/distance: fix pdist/cdist performance regression... > * `#9234 <https://github.com/scipy/scipy/pull/9234>`__: FIX: Proper > suppression > * `#9235 <https://github.com/scipy/scipy/pull/9235>`__: BENCH: > rationalize slow benchmarks + miscellaneous fixes > * `#9238 <https://github.com/scipy/scipy/pull/9238>`__: BENCH: limit > number of parameter combinations in spatial.*KDTree... > * `#9239 <https://github.com/scipy/scipy/pull/9239>`__: DOC: stats: Fix > LaTeX markup of a couple distribution PDFs. > * `#9241 <https://github.com/scipy/scipy/pull/9241>`__: ENH: Evaluate > plateau size during peak finding > * `#9242 <https://github.com/scipy/scipy/pull/9242>`__: ENH: stats: > Implement _ppf and _logpdf for crystalball, and do... > * `#9246 <https://github.com/scipy/scipy/pull/9246>`__: DOC: Properly > render versionadded directive in HTML documentation > * `#9255 <https://github.com/scipy/scipy/pull/9255>`__: DOC: mention > RootResults in optimization reference guide > * `#9260 <https://github.com/scipy/scipy/pull/9260>`__: TST: relax some > tolerances so tests pass with x87 math > * `#9264 <https://github.com/scipy/scipy/pull/9264>`__: TST Use > assert_raises "match" parameter instead of the "message"... > * `#9267 <https://github.com/scipy/scipy/pull/9267>`__: DOC: clarify > expect() return val when moment is inf/nan > * `#9272 <https://github.com/scipy/scipy/pull/9272>`__: DOC: Add > description of default bounds to linprog > * `#9277 <https://github.com/scipy/scipy/pull/9277>`__: MAINT: > sparse/linalg: make test deterministic > * `#9278 <https://github.com/scipy/scipy/pull/9278>`__: MAINT: > interpolate: pep8 cleanup in test_polyint > * `#9279 <https://github.com/scipy/scipy/pull/9279>`__: Fixed docstring > for resample > * `#9280 <https://github.com/scipy/scipy/pull/9280>`__: removed first > check for float in get_sum_dtype > * `#9281 <https://github.com/scipy/scipy/pull/9281>`__: BUG: only accept > 1d input for bartlett / levene in scipy.stats > * `#9282 <https://github.com/scipy/scipy/pull/9282>`__: MAINT: > dense_output and t_eval are mutually exclusive inputs > * `#9283 <https://github.com/scipy/scipy/pull/9283>`__: MAINT: add docs > and do some cleanups in interpolate.Rbf > * `#9288 <https://github.com/scipy/scipy/pull/9288>`__: Run > distance_transform_edt tests on all types > * `#9294 <https://github.com/scipy/scipy/pull/9294>`__: DOC: fix the > formula typo > * `#9298 <https://github.com/scipy/scipy/pull/9298>`__: MAINT: > optimize/trust-constr: restore .niter attribute for backward-compat > * `#9299 <https://github.com/scipy/scipy/pull/9299>`__: DOC: > clarification of default rvs method in scipy.stats > * `#9301 <https://github.com/scipy/scipy/pull/9301>`__: MAINT: removed > unused import sys > * `#9302 <https://github.com/scipy/scipy/pull/9302>`__: MAINT: removed > unused imports > * `#9303 <https://github.com/scipy/scipy/pull/9303>`__: DOC: signal: > Refer to fs instead of nyq in the firwin docstring. > * `#9305 <https://github.com/scipy/scipy/pull/9305>`__: ENH: Added > Yeo-Johnson power transformation > * `#9306 <https://github.com/scipy/scipy/pull/9306>`__: ENH - add dual > annealing > * `#9309 <https://github.com/scipy/scipy/pull/9309>`__: ENH add the > yulesimon distribution to scipy.stats > * `#9317 <https://github.com/scipy/scipy/pull/9317>`__: Nested SLSQP bug > fix. > * `#9320 <https://github.com/scipy/scipy/pull/9320>`__: MAINT: stats: > avoid underflow in stats.geom.ppf > * `#9326 <https://github.com/scipy/scipy/pull/9326>`__: Add example for > Rosenbrock function > * `#9332 <https://github.com/scipy/scipy/pull/9332>`__: Sort file lists > * `#9340 <https://github.com/scipy/scipy/pull/9340>`__: Fix typo in > find_peaks documentation > * `#9343 <https://github.com/scipy/scipy/pull/9343>`__: MAINT Use np.full > when possible > * `#9344 <https://github.com/scipy/scipy/pull/9344>`__: DOC: added > examples to docstring of dirichlet class > * `#9346 <https://github.com/scipy/scipy/pull/9346>`__: DOC: Fix import > of scipy.sparse.linalg in example (#9345) > * `#9350 <https://github.com/scipy/scipy/pull/9350>`__: Fix interpolate > read only > * `#9351 <https://github.com/scipy/scipy/pull/9351>`__: MAINT: > special.erf: use the x->-x symmetry > * `#9356 <https://github.com/scipy/scipy/pull/9356>`__: Fix documentation > typo > * `#9358 <https://github.com/scipy/scipy/pull/9358>`__: DOC: improve doc > for ksone and kstwobign in scipy.stats > * `#9362 <https://github.com/scipy/scipy/pull/9362>`__: DOC: Change > datatypes of A matrices in linprog > * `#9364 <https://github.com/scipy/scipy/pull/9364>`__: MAINT: Adds > implicit none to fftpack fortran sources > * `#9369 <https://github.com/scipy/scipy/pull/9369>`__: DOC: minor tweak > to CoC (updated NumFOCUS contact address). > * `#9373 <https://github.com/scipy/scipy/pull/9373>`__: Fix exception if > python is called with -OO option > * `#9374 <https://github.com/scipy/scipy/pull/9374>`__: FIX: AIX > compilation issue with NAN and INFINITY > * `#9376 <https://github.com/scipy/scipy/pull/9376>`__: COBLYA -> COBYLA > in docs > * `#9377 <https://github.com/scipy/scipy/pull/9377>`__: DOC: Add examples > integrate: fixed_quad and quadrature > * `#9379 <https://github.com/scipy/scipy/pull/9379>`__: MAINT: TST: Make > tests NumPy 1.8 compatible > * `#9385 <https://github.com/scipy/scipy/pull/9385>`__: CI: On Travis > matrix "OPTIMIZE=-OO" flag ignored > * `#9387 <https://github.com/scipy/scipy/pull/9387>`__: Fix defaut value > for 'mode' in 'ndimage.shift' in the doc > * `#9392 <https://github.com/scipy/scipy/pull/9392>`__: BUG: rank has to > be integer in rank_filter: fixed issue 9388 > * `#9399 <https://github.com/scipy/scipy/pull/9399>`__: DOC: Misc. typos > * `#9400 <https://github.com/scipy/scipy/pull/9400>`__: TST: stats: Fix > the expected r-value of a linregress test. > * `#9405 <https://github.com/scipy/scipy/pull/9405>`__: BUG: np.hstack > does not accept generator expressions > * `#9408 <https://github.com/scipy/scipy/pull/9408>`__: ENH: linalg: > Shorter ill-conditioned warning message > * `#9418 <https://github.com/scipy/scipy/pull/9418>`__: DOC: Fix ndimage > docstrings and reduce doc build warnings > * `#9421 <https://github.com/scipy/scipy/pull/9421>`__: DOC: Add missing > docstring examples in scipy.spatial > * `#9422 <https://github.com/scipy/scipy/pull/9422>`__: DOC: Add an > example to integrate.newton_cotes > * `#9427 <https://github.com/scipy/scipy/pull/9427>`__: BUG: Fixed defect > with maxiter #9419 in dual annealing > * `#9431 <https://github.com/scipy/scipy/pull/9431>`__: BENCH: Add dual > annealing to scipy benchmark (see #9415) > * `#9435 <https://github.com/scipy/scipy/pull/9435>`__: DOC: Add > docstring examples for stats.binom_test > * `#9443 <https://github.com/scipy/scipy/pull/9443>`__: DOC: Fix the > order of indices in optimize tutorial > * `#9444 <https://github.com/scipy/scipy/pull/9444>`__: MAINT: > interpolate: use operator.index for checking/coercing... > * `#9445 <https://github.com/scipy/scipy/pull/9445>`__: DOC: Added > missing example to stats.mstats.kruskal > * `#9446 <https://github.com/scipy/scipy/pull/9446>`__: DOC: Add note > about version changed for jaccard distance > * `#9447 <https://github.com/scipy/scipy/pull/9447>`__: BLD: > version-script handling in setup.py > * `#9448 <https://github.com/scipy/scipy/pull/9448>`__: TST: skip a > problematic linalg test > * `#9449 <https://github.com/scipy/scipy/pull/9449>`__: TST: fix missing > seed in lobpcg test. > * `#9456 <https://github.com/scipy/scipy/pull/9456>`__: TST: > test_eigs_consistency() now sorts output > > Checksums > ========= > > MD5 > ~~~ > > 0bb53a49e77bca11fb26698744c60f97 > scipy-1.2.0-cp27-cp27m-macosx_10_6_intel.macosx_10_9_intel.macosx_10_9_x86_64.macosx_10_10_intel.macosx_10_10_x86_64.whl > 39e215ac7e8d6de33d939486987dcba4 > scipy-1.2.0-cp27-cp27m-manylinux1_i686.whl > d6e33b2c05ffbcf9790628d656c8e61f > scipy-1.2.0-cp27-cp27m-manylinux1_x86_64.whl > a463a12d77b87df0a2d202323771a908 scipy-1.2.0-cp27-cp27m-win32.whl > 3dc17a11c7dd211ce51a338cfe30eb48 scipy-1.2.0-cp27-cp27m-win_amd64.whl > 82b1ecbecadfeddd2be1c6d616491029 > scipy-1.2.0-cp27-cp27mu-manylinux1_i686.whl > 65021ade783f1416b1920d2a2cc39d4d > scipy-1.2.0-cp27-cp27mu-manylinux1_x86_64.whl > 7cc2cdbc9b421ef10695b898cdc241e7 > scipy-1.2.0-cp34-cp34m-macosx_10_6_intel.macosx_10_9_intel.macosx_10_9_x86_64.macosx_10_10_intel.macosx_10_10_x86_64.whl > 2a4ccbfcccb9395fa7554a82db40e454 > scipy-1.2.0-cp34-cp34m-manylinux1_i686.whl > 662dc35acd6f588565cd6467465fc742 > scipy-1.2.0-cp34-cp34m-manylinux1_x86_64.whl > a19bd9969bb5b92595e82d924b8272f9 scipy-1.2.0-cp34-cp34m-win32.whl > 5f1eaa3745956db0da724f83dd174559 scipy-1.2.0-cp34-cp34m-win_amd64.whl > d32a4c31d0a188f3550c1306d20b03c7 > scipy-1.2.0-cp35-cp35m-macosx_10_6_intel.macosx_10_9_intel.macosx_10_9_x86_64.macosx_10_10_intel.macosx_10_10_x86_64.whl > 34f4a7f04abfda87fac8ab38a9a70a77 > scipy-1.2.0-cp35-cp35m-manylinux1_i686.whl > bd4d56910802870072e3c5ded69a8f08 > scipy-1.2.0-cp35-cp35m-manylinux1_x86_64.whl > cb3fb7ddd3992928f9173e4eb489d23e scipy-1.2.0-cp35-cp35m-win32.whl > 68f5ddcb6e592b1d9cba95f24faee7b5 scipy-1.2.0-cp35-cp35m-win_amd64.whl > c0e110f3a935731782c96a13cc264ea2 > scipy-1.2.0-cp36-cp36m-macosx_10_6_intel.macosx_10_9_intel.macosx_10_9_x86_64.macosx_10_10_intel.macosx_10_10_x86_64.whl > 9d898924498abbe2d26dd18b3413fb11 > scipy-1.2.0-cp36-cp36m-manylinux1_i686.whl > dd9ae664cbe7de54828d83c772e24da3 > scipy-1.2.0-cp36-cp36m-manylinux1_x86_64.whl > 8dea8432610bb3c63114eb6469c5f99a scipy-1.2.0-cp36-cp36m-win32.whl > ebda830aec7b60193772741f85fee28c scipy-1.2.0-cp36-cp36m-win_amd64.whl > 0e8b7a7908c50e635e639d2c69901140 > scipy-1.2.0-cp37-cp37m-macosx_10_6_intel.macosx_10_9_intel.macosx_10_9_x86_64.macosx_10_10_intel.macosx_10_10_x86_64.whl > 56719437a821f9f2f98f069225e70c87 > scipy-1.2.0-cp37-cp37m-manylinux1_i686.whl > 93d9d978855516ec38fa08620ef3443c > scipy-1.2.0-cp37-cp37m-manylinux1_x86_64.whl > fff3d66b877b6e6b9984b84ae9e4d76c scipy-1.2.0-cp37-cp37m-win32.whl > 3defb2c8b2f69057919ee3b0c92de65c scipy-1.2.0-cp37-cp37m-win_amd64.whl > e57011507865b0b702aff6077d412e03 scipy-1.2.0.tar.gz > 8eb6c1d7ceae0d06aef474f7801b8fca scipy-1.2.0.tar.xz > b0fb16b09319d3031d27ccf21a3ef474 scipy-1.2.0.zip > > SHA256 > ~~~~~~ > > d1ae77b79fd5e27a10ba7c4e7c3a62927b9d29a4dccf28f6905c25d983aaf183 > scipy-1.2.0-cp27-cp27m-macosx_10_6_intel.macosx_10_9_intel.macosx_10_9_x86_64.macosx_10_10_intel.macosx_10_10_x86_64.whl > 4b1f0883cb9d8ee963cf0a31c87341e9e758abb2cf1e5bcc0d7b066ef6b17573 > scipy-1.2.0-cp27-cp27m-manylinux1_i686.whl > c5eae911cf26b3c7eda889ec98d3c226f312c587acfaaf02602473f98b4c16d6 > scipy-1.2.0-cp27-cp27m-manylinux1_x86_64.whl > 58f0435f052cb60f1472c77f52a8f6642f8877b70559e5e0b9a1744f33f5cbe5 > scipy-1.2.0-cp27-cp27m-win32.whl > 4cce25c6e7ff7399c67dfe1b5423c36c391cf9b4b2be390c1675ab410f1ef503 > scipy-1.2.0-cp27-cp27m-win_amd64.whl > 02cb79ea38114dc480e9b08d6b87095728e8fb39b9a49b449ee443d678001611 > scipy-1.2.0-cp27-cp27mu-manylinux1_i686.whl > 7dc4002f0a0a688774ef04878afe769ecd1ac21fe9b4b1d7125e2cf16170afd3 > scipy-1.2.0-cp27-cp27mu-manylinux1_x86_64.whl > 7994c044bf659b0a24ad7673ec7db85c2fadb87e4980a379a9fd5b086fe3649a > scipy-1.2.0-cp34-cp34m-macosx_10_6_intel.macosx_10_9_intel.macosx_10_9_x86_64.macosx_10_10_intel.macosx_10_10_x86_64.whl > 72bd766f753fd32f072d30d7bc2ad492d56dbcbf3e13764e27635d5c41079339 > scipy-1.2.0-cp34-cp34m-manylinux1_i686.whl > 3132a9fab3f3545c8b0ba15688d11857efdd4a58d388d3785dc474f56fea7138 > scipy-1.2.0-cp34-cp34m-manylinux1_x86_64.whl > 7413080b381766a22d52814edb65631f0e323a7cea945c70021a672f38acc73f > scipy-1.2.0-cp34-cp34m-win32.whl > 6f791987899532305126309578727c0197bddbafab9596bafe3e7bfab6e1ce13 > scipy-1.2.0-cp34-cp34m-win_amd64.whl > 937147086e8b4338bf139ca8fa98da650e3a46bf2ca617f8e9dd68c3971ec420 > scipy-1.2.0-cp35-cp35m-macosx_10_6_intel.macosx_10_9_intel.macosx_10_9_x86_64.macosx_10_10_intel.macosx_10_10_x86_64.whl > 63e1d5ca9e5e1984f1a275276991b036e25d39d37dd7edbb3f4f6165c2da7dbb > scipy-1.2.0-cp35-cp35m-manylinux1_i686.whl > 03c827cdbc584e935264040b958e5fa0570a16095bee23a013482ba3f0e963a2 > scipy-1.2.0-cp35-cp35m-manylinux1_x86_64.whl > bc294841f6c822714af362095b181a853f47ed5ce757354bd2e4776d579ff3a4 > scipy-1.2.0-cp35-cp35m-win32.whl > cca33a01a5987c650b87a1a910aa311ffa44e67cca1ff502ef9efdae5d9a8624 > scipy-1.2.0-cp35-cp35m-win_amd64.whl > 8608316d0cc01f8b25111c8adfe6efbc959cbba037a62c784551568d7ffbf280 > scipy-1.2.0-cp36-cp36m-macosx_10_6_intel.macosx_10_9_intel.macosx_10_9_x86_64.macosx_10_10_intel.macosx_10_10_x86_64.whl > fb36064047e6bf87b6320a9b6eb7f525ef6863c7a4aef1a84a4bbfb043612617 > scipy-1.2.0-cp36-cp36m-manylinux1_i686.whl > 854bd87cc23824d5db4983956bc30f3790e1c7448f1a9e6a8fb7bff7601aef87 > scipy-1.2.0-cp36-cp36m-manylinux1_x86_64.whl > fc1a19d95649439dbd50baca676bceb29bbfcd600aed2c5bd71d9bad82a87cfe > scipy-1.2.0-cp36-cp36m-win32.whl > 8f5fcc87b48fc3dd6d901669c89af4feeb856dffb6f671539a238b7e8af1799c > scipy-1.2.0-cp36-cp36m-win_amd64.whl > bc6a88b0009a1b60eab5c22ac3a006f6968d6328de10c6a64ebb0d64a05548d3 > scipy-1.2.0-cp37-cp37m-macosx_10_6_intel.macosx_10_9_intel.macosx_10_9_x86_64.macosx_10_10_intel.macosx_10_10_x86_64.whl > 64b2c35824da3ef6bb1e722216e4ef28802af6413c7586136500e343d34ba179 > scipy-1.2.0-cp37-cp37m-manylinux1_i686.whl > 78a67ee4845440e81cfbfabde20537ca12051d0eeac951fe4c6d8751feac3103 > scipy-1.2.0-cp37-cp37m-manylinux1_x86_64.whl > 04f2b23258139c109d0524f111597dd095a505d9cb2c71e381d688d653877fa3 > scipy-1.2.0-cp37-cp37m-win32.whl > 5706b785ca289fdfd91aa05066619e51d140613b613e35932601f2315f5d8470 > scipy-1.2.0-cp37-cp37m-win_amd64.whl > 51a2424c8ed80e60bdb9a896806e7adaf24a58253b326fbad10f80a6d06f2214 > scipy-1.2.0.tar.gz > 1cfafc64e1c1c0b6d040d35780ba06f01e9cb44f3bacd8f33a5df6efe5a144a6 > scipy-1.2.0.tar.xz > 5b3d4b1654b4723431ad7f47b4556498a86a53d2fdb86e85a45c3da0c2a72a4b > scipy-1.2.0.zip > -----BEGIN PGP SIGNATURE----- > > iQIzBAEBCAAdFiEEgfAqrOuERrV4fwr6XCLdIy4FKasFAlwYY1YACgkQXCLdIy4F > KauihhAAo0fk+a4U4ilFXeZrUTuZTeqqHtD60yV8Z2pZvqQyH1BBP8BKksV/v3bP > 6ckl+upWaolMjZgehWhAKyGgE2oUHDu6RxaRS97Kbbns580M+wWduPX7kjf7OKoX > KFX1a8/GlBWTQKIMj6P2oShT7rvYB+WABvyoTxXKbHG0/ArOtOqqAYJFKLeOYB6m > o0+qajqt9syV2iqBFlHnrPKQ8qjtfPxqCP9KHhNIbHd17305YwJc58CBhpulIjaP > HIhJOuP7xigELX9yCzJ2qFGBjTd2HNvBQWIRjNDfbox6mhWO4no30c+OamG3MAr7 > n9TDzSIjxkRedvBzMRJwA/Q5/Mou/R16BF+ZzvCVZnp/h6LrXQg4ENfR304Byyy3 > NlYzmQKlV0XvP4oYewBnLfq6hcXAum7rf3L8ene8mu0OWJumW7Yr6PWfDNECDKvX > sPWSwkNu01Pzg/KUUkrS9w6m9bZTj4UP15L2Z8JSVdp/wxCHGh8txJWjOenoZBnD > BPyitzsgbuW+pd7+WmjZoJpr8QjL/Uw8vpUwlvKAvvVfFnVeVh3X1awK+D6iba69 > LbyfhOG3R846WkxHh458uvNxmYUbm6sqaZ7lzY91bD8z61jS6PCvpR8BJcwmpP7Y > q/duWsaakRWLe35CE8KuvKCgVFhhStX2sZ/hRkNsvm2/hEAtNW0= > =3Enc > -----END PGP SIGNATURE----- > _______________________________________________ > SciPy-Dev mailing list > scipy-...@python.org > https://mail.python.org/mailman/listinfo/scipy-dev > -- https://mail.python.org/mailman/listinfo/python-announce-list Support the Python Software Foundation: http://www.python.org/psf/donations/