en... What I means is ,read() runs well in bulkloop, but not in reading
camera.
On Sat, Feb 18, 2012 at 8:19 AM, Xiaofan Chen <xiaof...@gmail.com> wrote:
> On Sat, Feb 18, 2012 at 12:18 AM, Yunong Pang <029...@gmail.com> wrote:
> > When I test the read() in bulkloop program, it can read the
> > data successfully.
> > I don't know how to test it now...
>
> For bulkloop, you send something first to OUT endpoint
> EP2OUT and then you read from the IN endpoint EP6IN.
>
> But in your pyusb program, you only do the read. Maybe
> you should post a working C program and then see if your
> pyusb program is corresponding to the working C program.
>
> --
> Xiaofan
>
>
> ------------------------------------------------------------------------------
> Virtualization & Cloud Management Using Capacity Planning
> Cloud computing makes use of virtualization - but cloud computing
> also focuses on allowing computing to be delivered as a service.
> http://www.accelacomm.com/jaw/sfnl/114/51521223/
> _______________________________________________
> pyusb-users mailing list
> pyusb-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/pyusb-users
>
------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/
_______________________________________________
pyusb-users mailing list
pyusb-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/pyusb-users
