Numonyx chips determine the number of cycles to wait based on bits 7:4 in the volatile configuration register.
However, if these bits are 0x0 or 0xF, the number of dummy cycles to wait is 10 for QIOR and QIOR4 commands or when in QIO mode, and otherwise 8 for the currently supported fast read commands. [1] [1] https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-b/mt25q_qlkt_u_02g_cbb_0.pdf?rev=9b167fbf2b3645efba6385949a72e453 Signed-off-by: Joe Komlodi <koml...@xilinx.com> Reviewed-by: Francisco Iglesias <francisco.igles...@xilinx.com> --- hw/block/m25p80.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c index 56bd5bc..a67dc53 100644 --- a/hw/block/m25p80.c +++ b/hw/block/m25p80.c @@ -837,6 +837,30 @@ static uint8_t numonyx_mode(Flash *s) } } +static uint8_t numonyx_extract_cfg_num_dummies(Flash *s) +{ + uint8_t num_dummies; + uint8_t mode; + assert(get_man(s) == MAN_NUMONYX); + + mode = numonyx_mode(s); + num_dummies = extract32(s->volatile_cfg, 4, 4); + + if (num_dummies == 0x0 || num_dummies == 0xf) { + switch (s->cmd_in_progress) { + case QIOR: + case QIOR4: + num_dummies = 10; + break; + default: + num_dummies = (mode == MODE_QIO) ? 10 : 8; + break; + } + } + + return num_dummies; +} + static void decode_fast_read_cmd(Flash *s) { s->needed_bytes = get_addr_length(s); @@ -846,7 +870,7 @@ static void decode_fast_read_cmd(Flash *s) s->needed_bytes += 8; break; case MAN_NUMONYX: - s->needed_bytes += extract32(s->volatile_cfg, 4, 4); + s->needed_bytes += numonyx_extract_cfg_num_dummies(s); break; case MAN_MACRONIX: if (extract32(s->volatile_cfg, 6, 2) == 1) { @@ -885,7 +909,7 @@ static void decode_dio_read_cmd(Flash *s) ); break; case MAN_NUMONYX: - s->needed_bytes += extract32(s->volatile_cfg, 4, 4); + s->needed_bytes += numonyx_extract_cfg_num_dummies(s); break; case MAN_MACRONIX: switch (extract32(s->volatile_cfg, 6, 2)) { @@ -925,7 +949,7 @@ static void decode_qio_read_cmd(Flash *s) ); break; case MAN_NUMONYX: - s->needed_bytes += extract32(s->volatile_cfg, 4, 4); + s->needed_bytes += numonyx_extract_cfg_num_dummies(s); break; case MAN_MACRONIX: switch (extract32(s->volatile_cfg, 6, 2)) { -- 2.7.4
